On the prospects of developing high-efficiency piezocomposites based on crystals of solid solutions of ferroelectric relaxors

Electromechanical properties of the 0-0-2-2 type composite based on platelike crystals of solid solutions of ferroelectric relaxors of the Pb(A_1/3Nb_2/3)O₃-PbTiO₃ system (A = Zn, Mg) have been studied for the first time. Factors accounting for the record values of some effective parameters of this composite are considered. The relationship between the components of the elastic compliance tensor of the layered structures forming the composite and the positions of maxima of the effective hydrostatic parameters is established.     

Threshold sensitivity of anti-Stokes frequency converter

Expressions describing the threshold sensitivity of a quantum converter of IR radiation into visible light are obtained for two schemes of energy levels in the active atoms. Based on these expressions, practical criteria for the creation of such devices are formulated.     

Photoreactivation of Escherichia coli following medium-pressure ultraviolet disinfection and its control using chloramination.

Ultraviolet (UV) disinfection is becoming increasingly popular as an alternative disinfection technology to chlorination in recent years. In this study, we investigated the photoreactivation of Escherichia coli following medium-pressure (MP) UV disinfection of synthetic water by a bench-scale collimated beam apparatus. The UV doses ranged from 1.6 -19.7 mWs/cm2 and photoreactivation was investigated for 6 hours under fluorescent light. In addition, chloramination was applied after UV disinfection to investigate its ability to control photoreactivation. It was found that photoreactivation occurred for all UV doses tested and the increase in bacteria numbers ranged from 0.04 to 1.35 log10. However, the degree of photoreactivation decreased with increased UV doses. Chloramination experiments revealed that the addition of 0.5 mg/l of monochloramine resulted in suppression of photoreactivation for 1 hour only. An increased monochloramine dose of 1 mg/l was found to prevent photoreactivation for the entire duration of the experiment. The results of this study have shown that photoreactivation occurs even after MP UV disinfection, although it is of a lesser extent at higher UV doses. This study has also established that secondary chloramination can effectively suppress and eliminate photoreactivation with a chloramine dose of 1 mg/l.     

Nanoscale Crystallization in the Amorphous Alloy Fe79P14.2Si4.4Mn2.2V0.2 upon Pulsed Photon Annealing

The effect of pulsed photon annealing with energy densities from 1.4 to 42 J/cm² for various lengths of time on the structure of the amorphous alloy Fe₇₉P_14.2Si_4.4Mn_2.2V_0.2 was studied by x-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. The results demonstrate that short-term irradiation with low energy densities leads to surface relaxation of the amorphous alloy, increases the strength of the surface layer, and reduces the internal-friction peak. Longer term photon annealing leads to crystallization of the alloy throughout the sample thickness.     

Comparative Assessment of the Effect of Chemical and Radiation Factors on Workers and the General Public Resulting from the Salvaging of Nuclear-Powered Submarines

The results of observations performed over many years are used to make an assessment of the degree to which the concentration of chemical and radioactive substances escaping into the environment during salvaging of nuclear-powered submarines exceeds the admissable norms for workers at the main ship-repair facilities in Russia and for the general public in the surrounding territories. It is shown that the chemical substances are a determining factor in environmental contamination. Their content in the atmosphere and sea water exceeds the admissable norms near sources, on the territory of the enterprises, and (for individual indicators) at populated points. Under these conditions, the concentration of technogenic radionuclides does not exceed the admissable norms and its damaging effect on man is hundreds and thousands of times less than that of chemicals.     

Special Features of Fracture of Steels from Partially-Alloyed Powders

Special features of fracture of structural steels 45N2D2M and 45N4D2M manufactured by pressing with subsequent sintering from partially alloyed iron powders are studied. Impact bending tests of specimens with different levels of retained porosity show two kinds of fracture, i.e., intraparticle cleavage and interparticle dimple fracture. In addition, the surfaces of the “initial” pores come out to the fracture surface. Other conditions being equal, growth in porosity decreases the proportion of the brittle component of fracture and decreases the critical brittle point.     

Gradient interpenetrating polymer networks

The methods of synthesis and properties of gradient interpenetrating polymer networks (IPN) are discussed based on literature and authors' own experimental data. Gradient IPN can be treated as a sequence of an infinite number of layers of IPNs, whose composition and properties vary gradually from the surface to the core of specimens. These are analysed the most important properties of gradient IPNs: temperature transitions, thermodynamic and physico-mechanical characteristics and the main direction of practical application of gradient IPN-based materials.