碳酸盐岩气藏加砂压裂重复改造试验效果分析

针对碳酸盐岩气藏部分气井生产效能低的状况，决定在长庆气田下古生界尝试开展加砂压裂重复改造试验，以期提高低产、低效气井的产量，延长气田稳产期。通过潜心研究、精细设计及现场质检监控，优选了4口老井进行加砂压裂重复改造现场试验。从试验结果来看，虽然只有1口井取得明显的改造效果，但4口井加砂压裂施工都是成功的，说明对碳酸盐岩气藏实施加砂压裂是可以实现的，但在选井思路和压裂工艺方面还有待探索和研究。     

Synthesis, characterization and devitrification behaviour of an yttrium containing boroaluminate glass

The glass forming region in the B₂O₃-Al₂O₃-Y₂O₃ composition diagram has been determined by a melting and quenching procedure at temperatures up to 1800°C. Different physical characteristics (density, coefficient of thermal expansion, glass transition and crystallization peak temperatures) have been determined for a 35B₂O₃-40Al₂O₃-25Y₂O₃ glass composition (in mol.%). By using a predictive model and some NMR structural data, different elastic moduli (Young's modulus, bulk modulus, shear modulus and Poisson's ratio) have been calculated. The devitrification behaviour has also been studied. Internal crystallization is the dominant mechanism and a new (Y, Al)BO₃ ternary phase has been characterized by X-ray powder diffraction. The temperature and time nucleation dependence have been determined from DTA experiments as well as the crystallization kinetics (i.e. the Avrami exponent and the activation energy for crystal growth).     

A model for preventive maintenance operations and forecasting

Equipment costs constitute the greatest majority of overall costs for semiconductor manufacturing. Therefore, maintaining high equipment availability has been regarded as one of the major goals in the industry. The ability to forecast correctly equipment preventive maintenance (PM) timing requirements not only can help optimizing equipment uptime but also minimizing negative impacts on manufacturing production efficiency. This research used grey theory and evaluation diagnosis to construct a PM forecasting model for prediction of PM timing of various machines. The results showed significant improvements of PM timing predictions compared to the existing method based on experience and an alternative method proposed by Li and Chang (Semiconductor Manufacturing Technology Workshop 2002: 10–11, pp. 275–277) for the same fab cases. Received: June 2005 / Accepted: December 2005     

Average consensus in networks of dynamic agents with switching topologies and multiple time-varying delays

In this paper, we discuss average consensus problem in undirected networks of dynamic agents with fixed and switching topologies as well as multiple time-varying communication delays. By employing a linear matrix inequality method, we prove that all the nodes in the network achieve average consensus asymptotically for appropriate communication delays if the network topology is connected. Particularly, several feasible linear matrix inequalities are established to determine the maximal allowable upper bound of time-varying communication delays. Numerical examples are given to demonstrate the effectiveness and the sharpness of the theoretical results.     

基于聚类算法实现信号盲分类

本文解决了信号处理、工业控制等领域存在的非平稳信号盲分类问题。在聚类中广泛应用的K-Means算法及其它基于中心的聚类算法有两个共同的缺陷-需要预先确定类数目且随机初始化中心引起性能不稳定。本文提出的算法较好地解决了这两个问题，提高了算法稳定性，实现了非平稳信号盲分类。提取非平稳信号的小波系数作为聚类的样本空间，分析聚类结果的统计偏差以估计类的数目，采用调和均值准则进行分类。最后给出的仿真结果表明本文提出的方法较传统的K-Means算法明显降低分类错误率。     

Modelling biological processes under anaerobic conditions through integrating titrimetric and off-gas measurements-applied to EBPR systems.

An innovative method for modelling biological processes under anaerobic conditions is presented and discussed. The method is based on titrimetric and off-gas measurements. Titrimetric data is recorded as the addition rate of hydroxyl ions or protons that is required to maintain pH in a bioreactor at a constant level. An off-gas analysis arrangement measures, among other things, the transfer rate of carbon dioxide. The integration of these signals results in a continuous signal which is solely related to the biological reactions. When coupled with a mathematical model of the biological reactions, the signal allows a detailed characterisation of these reactions, which would otherwise be difficult to achieve. Two applications of the method to the enhanced biological phosphorus removal processes are presented and discussed to demonstrate the principle and effectiveness of the method.     

CMOS gyrator-C active transformers

A systematic approach for synthesising gyrator-C active transformers using MOS transistors is presented. The topology of gyrator-C active inductors and their characteristics are briefly reviewed first. This is followed by the development of ideal gyrator-C active transformers, where only the capacitor loads of the transconductors synthesising active transformers are considered. The self and mutual inductances of both the primary and secondary windings of active transformers are investigated in detailed. Non-ideal gyrator-C active transformers are developed with the consideration of both the resistance and capacitance loads of transconductors. The intrinsic relation between the self and mutual inductances is derived. The configuration of gyrator-C active transformers with multiple primary and secondary windings is also developed. The proposed active transformers offer large and tunable self and mutual inductances with virtually no silicon area requirement. Several practical implementations of the proposed active transformers have been realised in TSMC-0.18 mum 1.8 V CMOS technology and analysed using SpectreRF with BSIM3v3 device models. Simulation results on voltage transfer characteristics, self and mutual inductances, quality factors, stability, the effect of process variations, and noise are presented. The application of the proposed active transformers is exemplified using a 1.6 GHz active transformer quadrature oscillator.     

Fatigue Behavior and Retrofit Investigation of Distortion-Induced Web Gap Cracking

This paper studies a Kansas Department of Transportation welded plate girder bridge that developed fatigue cracks at small web gaps close to the girder top flange. Repair had been previously performed by softening the connection plate end with a slot retrofit, but cracks were recently found to have reinitiated at some of the repaired details and are again propagating. A comprehensive finite-element method study was performed to investigate the cracking behavior observed in the bridge and to recommend appropriate measures for future bridge retrofit. The analytical results show that stresses developed at the top flange web gaps could exceed yielding under the loading of an HS15 fatigue truck. The current slot repair used in the bridge was found to have introduced higher magnitude fatigue stresses in the web gap. To achieve a permanent repair of the bridge, it is recommended that a welded connection plate to flange attachment be used during future bridge retrofit. The web gap details should be able to withstand unlimited number of load cycles once this additional repair is performed.     

Bench-Scale Testing of Nanofiltration for Seawater Desalination

A dual-staged nanofiltration process is being evaluated as an alternative to reverse osmosis for seawater desalination. The primary goal of this system is to reduce energy consumption while producing potable water at an acceptable recovery rate. Investigation of this system at the bench-scale level focused on membrane surface characterization, ion rejection (including boron, bromide, and iodide rejection), and flux decline. Results from this study showed that two commercially available nanofiltration membranes can effectively desalinate seawater. Although fouling was apparent—and resulted in approximately 20% flux decline over 3 days—a critical flux was not identifiable. Operation of the system at different cross-flow velocities revealed the significance of hydrodynamic conditions on the polarization modulus, and hence on membrane performance.     

Mechanism and Optimal Application of Chemical Additives for Accelerating Early Strength of Lime-flyash Stabilized Soils

1IntroductionLime-flyashstabilizedsoil as a semi-rigid base mate-rial in highwayis widely usedin China.The goodintegri-ty,great bearing capacity,highstiffness and water-proof-ing quality areits special advantages.But itsinherent lowearly strength makes it…