教室照明设计的几个问题

本文针对我国中小学学生视力低下率的状况,分析产生的原因,提出对建筑照明设计标准的建议及设计人员在中小学教室照明设计时需要注意的问题.     

The measuring method of early lateral energy fraction in the scale model experiments

This paper introduces a measuring method of early lateral energy fraction in the scale model experiments. According to the interference principle of half wave length making the high frequency figure-8 directional microphone. With the signal-processing technique, a receiving and analyzing system, for the measurements of lateral energy fraction in the scale model is realized.     

Physical and Electrochemical Properties of Doped LiFePO4 as Cathode Material for Lithium-Ion Batteries

LiFePO4 cathode material was synthesized by a solid-state reaction using doping several elements (Nb5 ,Zr4 ). The starting materials were mixed with a high-efficient sander and treated thermally under flowing N2. The samples were characterized by X-ray diffraction (XRD), field-emission gun electron microscopy (FEG), and their electrochemical performance was investigated in the term of cycling behavior. Room temperature discharge capacity about 140.6 mA·h·g-1 was obtained at C/5 rate.     

Fabrication of NiO Buffer Layer for YBCO Coated Conductors by Combining Sputtering and SOE Method

In research of YBCO coated conductors, the development of a oxide template for epitaxial growth of YBCO is very important. Matsumoto et al have demonstrated the potential of the surface oxidation epitaxial (SOE) route for formation a cube textured NiO layer on nickel tapes. The epitaxial NiO functions as a buffer layer of chemical reaction between YBCO and nickel, and as a template for the epitaxial growth of YBCO. However, the surface quality of NiO is difficult to control and defects such as crack, spall and deep grooves exist in SOE NiO layer. A new approach combining sputtering and SOE method to obtain crack-free and cube textured NiO layer were reported. Ni tapes prepared by the combination of rolling and recrystallization were used for this work. A coating of Ni was first deposited on the tapes via magnetron sputtering. Then on the coating tapes, continuous and textured NiO layer were achieved by SOE technology.     

自蔓延高温合成材料中耗散结构及研究意义

在简介自蔓延高温合成技术和耗散结构论的基础上,分析和阐述了自蔓延高温合成材料中的耗散结构,探讨了自蔓延高温合成材料中耗散结构的研究意义。     

Challenges and R&D opportunities of smart distribution grids in China

In this paper, 5 investigations on the current states of power distribution grids in China have been introduced that cover the surveys of the practical distribution asset utilization, the simultaneity factor of feeder loading, the load compositions and characteristics, the urban reliability and the integration of distributed generations of renewable resources. Based on the survey results in the investigations, 12 Facts are clearly presented. It shows that the challenges to modernize the distribution grids in China are to improve the asset utilization rates, the electricity efficiencies and the reliability of distribution systems, as well as to integrate increasing amount of variable distributed renewable resources. Furthermore based on the challenges, 8 R&D opportunities have been identified.     

基于波形非线性映射的多局部放电脉冲群快速分类

简单分析了目前基于脉冲峰值-时间序列的局部放电检测系统在模式识别功能上存在的缺陷.提出利用基于单个脉冲波形的宽带检测技术研制多局放检测与模式识别系统,并给出了研制交流下该系统的数据处理方案.重点对研制该系统需要解决的脉冲群快速分类技术进行了阐述:即通过基于局放脉冲时域波形的非线性映射进行参数提取,形成2D或3D的波形特征参数空间,再使用非监督的模糊聚类分析实现局放脉冲群的快速分类.基于2D特征参数平面的仿真试验和3D特征参数空间的GIS污秽试验数据处理结果均表明该分类技术的可行性和实用性.这为多局放电检测与模式识别系统的研制提供了试验和理论依据.     

矿热炉把持器的传热分析

以矿热炉电极把持器的传热计算为核心,研究把持器的结构设计和参数选用。通过对冷却水流量、壁面厚度、水垢厚度、烟气温度等影响因素的研究,结合把持器传热边界条件,分析了在不同参数条件下传热变化趋势,为电极把持器的设计和应用提供了参考依据。     

华龙一号汽轮发电机组考核试验方案优化分析

核电机组因其本身的特殊性更加强调机组的安全稳定运行,华龙一号作为我国拥有自主知识产权的第三代核电机组,因其本身的设计理念和监督体系与国内在役核电机组均有不同,故不能直接套用其他类型机组的试验方案。针对华龙一号全球首堆福清核电5号机组汽轮机考核试验方案展开讨论和优化分析,结合机组实际考核试验遇到的相关问题给出解决方案,为后续华龙一号及其他三代堆型核电机组提供良好的借鉴。     

斩波串级调速系统换相失败的分析与仿真

换相失败是串级调速系统逆变器的常见故障,与许多因素有关。分析了串级调速系统换相失败的原因及其影响因素,并针对电源故障引起的换相失败,提出了控制方法,运用MATLAB/simulink对该方法进行仿真研究。结果表明该方法是准确的、可行的,便于工程上的应用研究。