Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Optimizing Financial Engineering Time Indicator Using Bionics Computation Algorithm and Neural Network Deep Learning

Computational Economics - The present work aims to optimize the time index of financial engineering to improve the efficiency of financial decision-making. A Back Propagation Neural Network (BPNN)...     

热处理非晶态Ni-P合金镀层的晶化过程

运用电沉积的方法在45钢基体上制备Ni-P合金镀层,使用差示扫描量热法(DSC)和热重法(TG)分析非晶态NiP合金镀层在20℃/min加热速率下的热效应和质量变化。在300℃和400℃分别对镀层进行0,15,30,45,60,75min的热处理,采用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射仪(XRD)、显微硬度计对镀层进行表征。结果表明:Ni-P合金镀层在加热过程中的放热峰出现在284.8℃处,镀层的质量和元素组成稳定;晶化过程经历了非晶态、亚稳态NiP和Ni5P2、稳定态Ni3P的转变;经过热处理后,镀层的显微硬度显著提高,最大值达1036.56HV,约为镀态的2倍;热处理态镀层的耐NaCl溶液腐蚀性能比镀态有所下降,但两者都比45钢基体好。     

小河嘴水电站增效扩容改造电气设备分析

小河嘴水电站已运行四十多年,设备老化,故障多,自动化水平低,对该站进行增效扩容改造是必要的,而且也是可行的。     

A comparative study of two techniques for improving power‐handling capability of CMOS T/R switches

This article proposes an asymmetric topology for transmit/receive (T/R) switches and more importantly presents a comparative study of both LC‐tuned and resistive body‐floating techniques for improving the power‐handling capability of the T/R switches in the same 0.18‐μm triple‐well CMOS. It is shown from simulations and measurements that the switches adopting either technique achieve comparable performances. For instance, the switch employing the LC‐tuned body‐floating technique exhibits insertion loss of 1.5 dB, isolation of 23.5 dB, and power‐handling capability of 22.5 dBm at 5.2 GHz, whereas the switch using the resistive body‐floating technique exhibits insertion loss of 1.3 dB, isolation of 24 dB, and power‐handling capability of 22.2 dBm, respectively. Therefore, one can conclude that the asymmetric topology with the resistive body‐floating technique is more suitable for designing T/R switches for wireless local area network applications as it consumes smaller silicon area. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

媒体舆论引导仿真

使用multi-Agent的建模思想,以现实为基础建立了一个舆论涌现的仿真模型.该模型主要由个体和媒体以及它们之间的规则组成.个体的属性包括了个体之间的信任度、个体观点的可信度和个体的从众性;媒体的属性包括媒体的影响范围和权威度.规则包括个体交互规则和个体与媒体的交互规则.通过仿真证明了模型是合理的,并且用该模型来仿真媒体对舆论演化的引导作用,从媒体的数量和报道频率2个方面研究媒体在舆论形成过程中的引导作用,结果发现积极媒体的数量越多对舆论的引导作用越强,媒体的报道频率增加会对舆论的形成产生积极效果,但是超过一定次数时对舆论的影响作用有限.最后通过对模拟结果的分析,提出了通过媒体来引导舆论的方式.     

头像提取及处理技术研究

对物体辨识或追踪,较常用的方法为背景相减。在取出影像之后对影像做修饰、噪声除去等动作,以便进行影像分析。利用物体移动与背景的差异量,提取主体信息。主体影像存在噪声干扰和过度侵蚀等现象。本文提出消除噪声以及填补破损的影像的方法来得到较佳的主体影像。     

Toxicoproteomics and its application to human health risk assessment

Toxicoproteomics is the use of proteomic technologies to better understand environmental and genetic factors, toxic mechanisms, and modes of action in response to acute exposure to toxicants and in the long-term development of diseases caused or influenced by these exposures. Use of toxicoproteomic technologies to identify key biochemical pathways, mechanisms, and biomarkers of exposure and toxicity will decrease the uncertainties that are associated with human health risk assessments. This review provides an overview of toxicoproteomics from human health risk assessment perspectives. Key toxicoproteomic technologies such as 2-D gel-based proteomic methods and toxicoproteomic approaches are described, and examples of applications of these technologies and methodologies in the risk assessment context are presented. The discussion includes a focus on challenges and future directions.