Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy

By the use of atomic force microscopy (AFM), formation mechanism of nodular structure in cellulose acetate membranes was systematically investigated. Elementary factors affecting the nodule formation were delineated on the basis of both kinetic and thermodynamic considerations. It was shown that (1) the exact nature of nodular structure is thermodynamic equilibrium glassy state; nodular structure will vanish in the rubbery state; (2) the thermodynamic factor affecting nodule formation is the membrane formation temperature; with the membrane formation temperature decreasing, more chain segments are able to form nodular structures; (3) nodule formation is dependent on the segment rearrangement; variation of the solvent environment is the major kinetic factor affecting the segment rearrangement and nodule formation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1328–1335, 2003     

添加物对ZrO2系快离子导体烧结性能的影响

本文介绍了１３２０℃下，ＣａＯ，Ｙ２Ｏ３等稳定剂，低融物组成及１－６价阳离子化合物对ＺｒＯ２烧结性能的影响并列举出材料的晶型及某些主要性能。     

The onset of Taylor-Görtler vortices in impulsively decelerating swirl flow

The onset of hydrodynamical instability induced by impulsive spin-down to rest in a cylinder containing a Newtonian fluid is analyzed by using propagation theory. It is well-known that the primary transient swirl flow is laminar, but with initial high velocities secondary motion sets in at a certain time. The dimensionless critical time Τ_c to mark the onset of instability is presented here as a function of the Reynolds number Re. Available experimental data indicate that for large Re deviation of the velocity profiles from their momentum diffusion occurs starting from a certain time Τ≈4Τ_c. This means that secondary motion is detected at this characteristic time. It seems evident that during Τ_c⪯Τ⪯4Τ_c, secondary motion is relatively very weak and the primary diffusive momentum transfer is dominant.     

Spectroscopic and electrical properties of 3-alkyl pyrrole-pyrrole copolymers

Three types of copolymers composed of pyrrole and 3-alkyl pyrroles (with alkyl being pentyl, nonyl and undecyl) have been synthesized. A strong linear dependency of the alkyl chain length on the as-prepared copolymer physical properties is demonstrated via (a) DSC (for phase transition temperatures and enthalpy changes) and (b) UV-vis (for wavelengths of the polaronic and bipolaronic electronic transitions, and ratio of the corresponding absorbances). A trend in the copolymers' doping level vs alkyl chain length is also estimated, via IR, by taking the ratio of band intensities of the stretching modes of the polaronic and bipolaronic species. The copolymers are found to be soluble in organic solvents and their solutions can be cast onto glass substrates or metals resulting in thin films, which can be used as the electroactive component of Schottky diodes. The electrical properties of these diodes are also found to be dependent on increasing 3-alkyl chain length.     

Factors influencing magnetic polymer microspheres prepared by dispersion polymerization

Magnetic iron oxide (Fe₃O₄) was prepared by a coprecipitation method. Core–shell composite magnetic polymer microspheres with carboxyl groups were synthesized by the dispersion polymerization of styrene and acrylic acid in the presence of magnetic oxide, and dibenzoyl peroxide was used as an initiator. The synthesized magnetic polymer microspheres were characterized with X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and so forth. The results indicated that the product was single‐phase Fe₃O₄, and its average size was about 10 nm. The configuration of the microspheres, which contained carboxyl groups, was spherical, and the average size was about 2 μm. The results of vibrating sample magnetometry tests showed that the magnetic powders produced by different surfactants had different saturation magnetizations. When poly(ethylene glycol) with a weight‐average molecular weight of 4000 was used as a surfactant, the saturation magnetization of the samples reached 69.2 emu/g. The factors that affected the shape, magnetism, size, and distribution of the microspheres were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

An SVD-based adaptive robust speech steganography using MDCT coefficient

Multimedia Tools and Applications - Speech is one of the essential ways of communication. The study of speech steganography provides great value in information security. To improve imperceptibility...     

镁合金废料的回收

在镁合金零部件生产过程中，特别是在压力铸造生产中，产生出来的废料以及使用后报废的镁合金零件逐渐增多。出于成本和环境因素的考虑，必须对这与日俱增的镁合金废料进行有效回收。本文以生产占90％的镁合金零部件压力铸造为主线，介绍镁合金废料回收的经济分析，镁合金废料的来源和分类、现行回收技术的现状及发展趋势。并介绍香港生产力促进局和重庆硕龙科技公司最近研究开发的一种新型镁合金废料现场精炼回收系统。     

SiO_2/Al_2O_3 RATIO OF HYDRATED SODIUM ALUMINOSILICATE IN ALUMINA PRODUCTION

ＳｉＯ２／Ａｌ２Ｏ３ＲＡＴＩＯＯＦＨＹＤＲＡＴＥＤＳＯＤＩＵＭＡＬＵＭＩＮＯＳＩＬＩＣＡＴＥＩＮＡＬＵＭＩＮＡＰＲＯＤＵＣＴＩＯＮ①ＤｅｎｇＨｏｎｇｍｅｉ，ＺｅｎｇＷｅｎｍｉｎｇ，ＣｈｅｎＮｉａｎｙｉＳｈａｎｇｈａｉＩｎｓｔｉｔｕｔｅｏｆＭｅｔａｌｕ...