Electrical Properties and Electroluminescence of 4H-SiC p-n Junction Diodes

Homoepitaxial growth of 4H-SiC on off-oriented Si-face(0001 ) substrates was performed by using the step-controlled epitaxy technique in a newly developed low-pressure hot-wall CVD (LP-HWCVD) system with a horizontal aircooled quartz tube at around 1500 ℃and 1.33 × 104 Pa by employing SiH4 C2H4 H2. In-situ doping during growth was carried out by adding NH3 gas into the precursor gases. It was shown that the maximum Hall mobility of the undoped 4H-SiC epilayers at room temperature is about 430 cm2 ·V -1 ·s -1 with a carrier concentration of ～ 1016 cm-3 and the highest carrier concentration of the N-doped 4H-SiC epilayer obtained at NH3 flow rate of 3 sccm is about 2.7 × 1021 cm-3 with a mobility of 0.75 cm2 ·V -1 ·S -1. SiC p-n junctions were obtained by epitaxially growing N-doped 4H-SiC epilayers on Aldoped 4H-SiC substrates. The C-V characteristics of the diodes were linear in the 1/C3-V coordinates indicating that the obtained p-n junctions were graded with a built-in voltage of 2.7 eV. The room temperature electroluminescence spectra of 4H-SiC p-n junctions are studied as a function of forward current. The D-A pair recombination due to nitrogen donors and the unintentional, deep boron center is dominant at low forward bias, while the D-A pair recombination due to nitrogen donors and aluminum acceptors are dominant at higher forward biases. The p-n junctions could operate at temperature of up to 400 ℃, which provides a potential for high-temperature applications.     

Challenges and R&D opportunities of smart distribution grids in China

In this paper, 5 investigations on the current states of power distribution grids in China have been introduced that cover the surveys of the practical distribution asset utilization, the simultaneity factor of feeder loading, the load compositions and characteristics, the urban reliability and the integration of distributed generations of renewable resources. Based on the survey results in the investigations, 12 Facts are clearly presented. It shows that the challenges to modernize the distribution grids in China are to improve the asset utilization rates, the electricity efficiencies and the reliability of distribution systems, as well as to integrate increasing amount of variable distributed renewable resources. Furthermore based on the challenges, 8 R&D opportunities have been identified.     

电测技术在人体骨骼力学性能分析中的应用

用电测实验应力分析方法,对人体管状长骨的力学性质,以及骨折的钢板皮外固定治疗中的力学问题,进行测量与分析。其结果对于推进力学理论在医学方面的应用,以及临床治疗骨折,具有实用价值。     

湖南省土壤中天然放射性核素含量调查研究

本文报道湖南省土壤中天然放射性核素含量的调查结果。布点方法与环境陆地γ辐射剂量率调查相同,全省共布25×25km 网格点309个,土类加密点5个,特殊加密点7个,共采集土壤样品321个。土壤样品中天然放射性核素含量的测定采用放化分析方法。调查结果表明,湖南省土壤中~(23(?))U、~(232)Th、~(226)Ra 和~(40)K 含量按样品数的加权均值分别为48.05、54.82、59.36和447.75Bq/kg。零陵地区土壤中~(238)U、~(232)Th 和~(226)Ra 含量最高,郴州地区次之,湘西自治州地区居三。湖南省6类主要土壤中~(40)含量较为接近,而红壤中~(238)U、~(232)Th 和~(226)Ra 含量较高。     

矿热炉把持器的传热分析

以矿热炉电极把持器的传热计算为核心,研究把持器的结构设计和参数选用。通过对冷却水流量、壁面厚度、水垢厚度、烟气温度等影响因素的研究,结合把持器传热边界条件,分析了在不同参数条件下传热变化趋势,为电极把持器的设计和应用提供了参考依据。     

微机控制的感应电动机特性测试系统

采用单片机作为下位机,PC机作为上位机,联合组成了感应电动机特性的微机测试系统。单片机对被测电量波形进行同步采样,对被测电机的运行状态进行控制。PC机控制单片机的运行,对测量数据进行快速处理,打印试验报告,绘制图形曲线,实现了测试过程的自动化。     

同步沉淀除磷在污水生物处理中的应用

在同步沉淀工艺的基础上,综述了同步沉淀在不同的污水生物处理工艺中的除磷效果、化学试剂用量的控制、除磷过程模拟的研究进展,并重点讨论了同步沉淀中的化学试剂对生物处理系统性能的影响.最后,展望了同步沉淀在污水生物处理中的应用前景和研究方向.     

Invariant Deformation Element Model Interpretation to the Crystallography of Diffusional Body-Centered-Cube to Face-Centered-Cube Phase Transformations

The crystallography of body-centered-cube to face-centered cube (bcc-to-fcc) diffusion phase transformations in a duplex stainless steel and a Cu-Zn alloy, including long axis, orientation relationship (OR), habit plane (HP), and dislocation spacing, is successfully interpreted with one-step rotation from the Bain lattice relationship by applying a simplified invariant line (IL) analysis. It is proposed that the dislocation slipping direction in the matrix plays an important role in controlling the crystallography of precipitation.     

基于Jack的虚拟环境中一种防止穿越的实现

在虚拟环境下虚拟人手和虚拟物体的交互中,会发生穿越现象。为了解决穿越问题,在人体模型系统Jack的虚拟环境中,根据约束Constraint对象的特点,利用Constraint对象来模拟物体对人手阻挡作用,并利用约束队列实现了对场景中Constraint对象的管理,达到防穿越的效果。     

基于蒙特卡罗方法的复合材料辐射屏蔽设计北大核心CSCD

在乏燃料后处理厂的工作环境中可能存在着低能中子-γ射线混合辐射,严重威胁工作人员的人身安全。本文针对上述混合辐射环境,利用蒙特卡罗程序Geant4模拟计算了一种钨/硼纤维增强含硼/铋聚合物复合材料中不同材料参数对低能中子和γ射线综合防护效果的影响。结果显示,此种钨/硼纤维复合材料对低能中子和γ射线均具有良好的屏蔽效果。文章证实了纤维垂直排布方式具有比平行排布方式更优的屏蔽效果,且垂直排布方式下透过粒子束的强度分布更加均匀。此外,在聚合物基体中掺杂一定质量分数的硼/铋可以进一步增强复合材料的辐射屏蔽效果。依据这些结果我们认为此种复合材料可以为后处理厂等辐射环境中的防护服及相关防护用具提供参考。