基于LabVIEW的汽车仪表步进电机测试系统

汽车仪表指针大多采用步进电机驱动。为了确保生产的电机质量,需要一套性能良好的测试设备。为此,设计了一套步进电机测试系统。针对汽车仪表步进电机测试的要求,引入了基于LabVIEW的虚拟仪器技术。在LabVIEW平台下开发的系统具有开发周期短、功能灵活、维护费用低等优势。本系统实现了对步进电机多种模式的控制,能够实时采集、存储电机绕组的电压和电流信号,并对数据分析处理以判断电机运转状态。实验结果表明该系统性能良好,可以用于步进电机测试。     

Sub‐Millimeter‐Scale Monolayer p‐Type H‐Phase VS2

2D H‐phase vanadium disulfide (VS₂) is expected to exhibit tunable semiconductor properties as compared with its metallic T‐phase structure, and thus is of promise for future electronic applications. However, to date such 2D H‐phase VS₂ nanostructures have not been realized in experiment likely due to the polymorphs of vanadium sulfides and thermodynamic instability of H‐phase VS₂. Preparation of H‐phase VS₂ monolayer with lateral size up to 250 µm, as a new member in the 2D transition metal dichalcogenides (TMDs) family, is reported. A unique growth environment is built by introducing the molten salt‐mediated precursor system as well as the epitaxial mica growth platform, which successfully overcomes the aforementioned growth challenges and enables the evolution of 2D H‐phase structure of VS₂. The honeycomb‐like structure of H‐phase VS₂ with broken inversion symmetry is confirmed by spherical aberration‐corrected scanning transmission electron microscopy and second harmonic generation characterization. The phase structure is found to be ultra‐stable up to 500 K. The field‐effect device study further demonstrates the p‐type semiconducting nature of the 2D H‐phase VS₂. The study introduces a new phase‐stable 2D TMDs materials with potential features for future electronic devices.     

A call admission and rate control scheme for multimedia support over IEEE 802.11 wireless LANs

Quality of service (QoS) support for multimedia services in the IEEE 802.11 wireless LAN is an important issue for such WLANs to become a viable wireless access to the Internet. In this paper, we endeavor to propose a practical scheme to achieve this goal without changing the channel access mechanism. To this end, a novel call admission and rate control (CARC) scheme is proposed. The key idea of this scheme is to regulate the arriving traffic of the WLAN such that the network can work at an optimal point. We first show that the channel busyness ratio is a good indicator of the network status in the sense that it is easy to obtain and can accurately and timely represent channel utilization. Then we propose two algorithms based on the channel busyness ratio. The call admission control algorithm is used to regulate the admission of real-time or streaming traffic and the rate control algorithm to control the transmission rate of best effort traffic. As a result, the real-time or streaming traffic is supported with statistical QoS guarantees and the best effort traffic can fully utilize the residual channel capacity left by the real-time and streaming traffic. In addition, the rate control algorithm itself provides a solution that could be used above the media access mechanism to approach the maximal theoretical channel utilization. A comprehensive simulation study in ns-2 has verified the performance of our proposed CARC scheme, showing that the original 802.11 DCF protocol can statically support strict QoS requirements, such as those required by voice over IP or streaming video, and at the same time, achieve a high channel utilization. Hongqiang Zhai received the B.E. and M.E. degrees in electrical engineering from Tsinghua University, Beijing, China, in July 1999 and January 2002 respectively. He worked as a research intern in Bell Labs Research China from June 2001 to December 2001, and in Microsoft Research Asia from January 2002 to July 2002. Currently he is pursuing the PhD degree in the Department of Electrical and Computer Engineering, University of Florida. He is a student member of IEEE. Xiang Chen received the B.E. and M.E. degrees in electrical engineering from Shanghai Jiao Tong University, Shanghai, China, in 1997 and 2000, respectively, and the Ph.D. degree in electrical and computer engineering from the University of Florida, Gainesville, in 2005. He is currently a Senior Research Engineer at Motorola Labs, Arlington Heights, IL. His research interests include resource management, medium access control, and quality of service (QoS) in wireless networks. He is a Member of Tau Beta Pi and a student member of IEEE. Yuguang Fang received a Ph.D degree in Systems and Control Engineering from Case Western Reserve University in January 1994, and a Ph.D degree in Electrical Engineering from Boston University in May 1997. From June 1997 to July 1998, he was a Visiting Assistant Professor in Department of Electrical Engineering at the University of Texas at Dallas. From July 1998 to May 2000, he was an Assistant Professor in the Department of Electrical and Computer Engineering at New Jersey Institute of Technology. In May 2000, he joined the Department of Electrical and Computer Engineering at University of Florida where he got the early promotion with tenure in August 2003 and has been an Associate Professor since then. He has published over one hundred (100) papers in refereed professional journals and conferences. He received the National Science Foundation Faculty Early Career Award in 2001 and the Office of Naval Research Young Investigator Award in 2002. He is currently serving as an Editor for many journals including IEEE Transactions on Communications, IEEE Transactions on Wireless Communications, IEEE Transactions on Mobile Computing, and ACM Wireless Networks. He is also actively participating in conference organization such as the Program Vice-Chair for IEEE INFOCOM’2005, Program Co-Chair for the Global Internet and Next Generation Networks Symposium in IEEE Globecom’2004 and the Program Vice Chair for 2000 IEEE Wireless Communications and Networking Conference (WCNC’2000).     

Template Deformation‐Tailored ZnO Nanorod/Nanowire Arrays: Full Growth Control and Optimization of Field‐Emission

Here, a facile and effective route toward full control of vertical ZnO nanorod (NR)/nanowire (NW) arrays in centimeter‐scale areas and considerable improvement of field‐emission (FE) performance is reported. Controlled deformation of colloidal crystal monolayer templates is introduced by heating near glass‐transition temperature. The NR/NW density, uniformity, and tapering were all adjusted through selection of template size and deformation, and electrolyte composition. In line with the adjustments, the field‐emission performance of the arrays is significantly improved. A low turn‐on electric field of 1.8 V µm^?1, a field‐enhancement factor of up to 5 750, and an emitting current density of up to 2.5 mA cm^?2 were obtained. These improved parameters would benefit their potential application in cold‐cathode‐based electronics.     

Distributed feedback quantum cascade lasers operating in continuous-wave mode at λ≈7.6μm

正Distributed feedback(DFB) quantum cascade lasers(QCLs) in continuous-wave(CW) mode emitting atλ≈7.6μm are presented.Holographic lithography was used to fabricate the first-order distributed feedback grating. For a high-reflectivity-coated QCL with 14.5-μm-wide and 3-mm-long cavity,CW output powers of 300 mW at 85 K and still 10 mW at 270 K are obtained.Single-mode emission with a side-mode suppression ratio(SMSR) of about 30 dB and a wide tuning range of ~300 nm in the temperature range from 85 to 280 K is observed.     

基于复合式抛物面聚光器的LED反光杯建模研究

针对复合式抛物面聚光器(CPC)无法在TracePro软件中直接建模的不足,结合TracePro软件特点,对CPC关键参数进行了分析,通过数学模型对参数之间的几何关系进行了推导,得出了计算公式,实现了CPC在TracePro中的建模。将CPC设计成反光杯应用于LED灯具中,可方便地进行光学模拟和分析,进而有效地缩短产品开发周期和开发成本。为CPC设计提供了数学依据,通过建模验证了该方法的可行性,有效提高了设计效率。结果表明,用通过该方法设计出的CPC做成的LED反光杯,可以极大地提高灯具的发光效率。为其在照明领域的发展应用提供了更好的使用价值和前景。     

深空、自由空间、非可视散射和水下激光光子通信

激光光子通信是国际通信前沿研究领域的一个重要的研究方向。近年来激光光子通信技术被广泛地应用于深空通信,卫星与卫星激光通信,自由空间通信,非可视散射通信和水下通信等领域内。首先,由于自由空间激光光子通信系统的高下传速率优势,使其成为未来深空通信重要的研究方向。其次,基于自由空间和非可视散射光子通信方式的分布式传感网络逐渐从实研室走向实际应用。在农业土壤质量检测、地震灾害事件、结构件压力、医疗参数数据、污染物输运和军事应用领域具有广泛的应用价值。另外,水下光子通信技术能够满足与水下观测和海底检测以及钻井平台相关的研究和检测所需要的高速率通信需求。总之,由于激光和光子探测技术的独特优势,光子通信技术研究兴趣日益强劲,将在深空、自由空间和水下通信中被广泛的应用和深入研究。     

Nanoparticles of the Lead-free Solder Alloy Sn-3.0Ag-0.5Cu with Large Melting Temperature Depression

Due to the toxicity of lead (Pb), Pb-containing solder alloys are being phased out from the electronics industry. This has lead to the development and implementation of lead-free solders. Being an environmentally compatible material, the lead-free Sn-3.0Ag-0.5Cu (wt.%) solder alloy is considered to be one of the most promising alternatives to replace the traditionally used Sn-Pb solders. This alloy composition possesses, however, some weaknesses, mainly as a result of its higher melting temperature compared with the Sn-Pb solders. A possible way to decrease the melting temperature of a solder alloy is to decrease the alloy particle size down to the nanometer range. The melting temperature of Sn-3.0Ag-0.5Cu lead-free solder alloy, both as bulk and nanoparticles, was investigated. The nanoparticles were manufactured using the self-developed consumable-electrode direct current arc (CDCA) technique. The melting temperature of the nanoparticles, with an average size of 30 nm, was found to be 213.9°C, which is approximately 10°C lower than that of the bulk alloy. The developed CDCA technique is therefore a promising method to manufacture nanometer-sized solder alloy particles with lower melting temperature compared with the bulk alloy.     

IMS诈骗电话防范方案及关键问题研究

本文从研究新业务背景下的诈骗电话监控需求开始,分析了针对IMS诈骗电话监控业务的监控系统架构、监控方案选择、系统部署方案、系统覆盖范围以及其他关键技术问题。     

Biodegradation characteristics of heavy oil and correlation with group composition and carbon isotopes

Shallow heavy oil is abundant but seriously biodegraded in Chepaizi Uplift and many biomarkers cannot be used effectively. Therefore, some new parameters and methods are used to analyze the biodegradation extent, classification, and oil–source of heavy oil samples. The acid value and group compositions are used to evaluate the biodegradation extent. Carbon isotopes are not only used to calculate the percentage of complex combined oil, but also to correlate oil–source in Chepaizi Uplift. δ¹³C of oil is used together with biomarkers that can bear serious degradation, such as pregnanes, tricyclic terpanes, and gammacerane. The crossplots of δ¹³C and biomarkers are effective correlation tools, such as the crossplot of δ¹³C and C₂₁/C₂₃ tricyclic terpanes. δ¹³C in different group compositions also show excellent oil–source correlation results. These methods to study biodegraded heavy oil are not only helpful to clarify the biodegradation extent of shallow heavy oil in an extensive area, but also effective to classify heavy oil and correlate oil–source.