基于Web Service的动态工作流系统中资源管理问题

传统工作流技术中资源与流程的绑定方式过于紧密，很难实现动态修改。从资源的描述方式、绑定方法以及调用等各个方面进行了分析和解决，提出一种新的资源的动态绑定机制，并通过将工作流技术和Web Service技术相互结合实现了这种绑定机制，提高了工作流的动态性。     

石英晶体薄膜厚度差动测量技术的研究􀀁

本文介绍一种石英晶体膜测厚的差动工作方式。它的厚度测量精度为１ｎｍ，分辨率为纳米级，其温度稳定性在０－＋４００℃范围内达到５０Ｈｚ。这种差动测量技术不仅可在真空镀膜工艺中实现在线测量，而且在纳米技术及超精细加工中具有广阔应用前景。     

三相异步电动机起动方式的分析与选择

通过分析三相异步电动机各种起动方式的电压、电流、转矩的波形和特性,合理选择合适的起动方式。     

浅析TSC+ASVG混合型动态无功补偿系统

本文阐述了TSC ASVG混合型动态无功补偿系统的组成和工作原理。它是一种新型的．先进的动态无功补偿系统。在电网治理中具有很好的适用性和良好的性能。     

基于射频识别技术的装备维修器材管理信息系统设计

本文简要介绍了射频识别技术的基本原理，着重叙述了基于射频识别技术的便携式维修器材管理信息系统的组成、功能和特点。该系统运行可靠，操作方便，提高了装备维修器材保障的效率。     

Investigation and minimization of underfill delamination in flip chip packages

A generalized plane strain condition is assumed for an edge interfacial crack between die passivation and underfill on an organic substrate flip chip package. C4 solder bumps are explicitly modeled. Temperature excursions are treated as loading conditions. The design factors studied include underfill elastic modulus, underfill coefficient of thermal expansion (CTE), fillet height, and die overhang. Varying underfill modulus and CTE produces a different stress field at underfill/die passivation interface, different stress intensity factor (SIF), and phase angle (/spl psi/) even under the same loading condition. The baseline case uses underfill with elastic modulus of 6 GPa, CTE of 36 ppm//spl deg/C and fillet height equal to half die thickness. Four more cases involving underfill material properties are investigated by varying elastic modulus between 3 and 9 GPa, and by varying CTE between 26 and 46 ppm//spl deg/C. The effect of fillet height is also studied by assuming no fillet and full fillet, i.e., fillet height equal to die thickness. Finally, two cases concerning the influence of die overhang, defined as the nominal distance between outermost solder joint and die edge, are investigated. Fracture parameters, including energy release rate (G) and phase angle (/spl psi/), are evaluated as a function of dimensions. Underfill material properties (elastic modulus and CTE), fillet configuration, and die overhang can be optimized to reduce the risk of underfill delamination in flip chip or direct chip attach (DCA) applications.     

三元体系PEG 4000-Cs2SO4-H2O在25,35和45 ℃时的相平衡研究

采用自制的相平衡研究装置，测定了PEG 4000-Cs2SO4-H2O三元体系在25，35和45℃时的等温平衡溶解度，同时给出了该体系的完整相图，在相图中观察到6个相区。结果表明，该体系双液相区随着温度的升高略有增加，结线的斜率也随温度的升高而增大。用四参数方程y=a bx^0.5 cχ dχ^2对该体系的双液线进行了拟合，拟合结果较好。用Othmer-Tobias方程和Bancroft方程对该体系结线的实验数据进行了关联，所有线性相关系数均大于0．98。热重分析确定平衡固相组成为无水硫酸铯。     

Effect of deteriorated microstructures on stress corrosion cracking of X70 pipeline steel in acidic soil environment

In order to investigate stress corrosion cracking (SCC) of X70 pipeline steel and its weld joint area in acidic soil environ-ment in China, two simulating methods were used: one was to obtain bad microstructures in heat affected zone by annealing at 1300°C for 10 min and then, quenching in water; the other was to get different simulating solutions of acidic soil in Yingtan in south-east China. The SCC susceptibilities of X70 pipeline steel before and after quenching in the simulating solutions were analyzed...     

铸坯喷丸工艺对430铁素体不锈钢卷板表面质量的影响

430钢连铸板坯经喷丸处理后可以去除连铸坯表面原始铁鳞与保护渣残留,铸坯平均振痕深度降低0.13 mm。喷丸处理铸坯经加热炉加热后生成的氧化铁皮结构与基体存在明显界面,在热轧与酸洗过程容易去除,避免了夹渣与氧化残留造成的冷板表面粗糙条纹类缺陷,酸洗板表面粗糙度由3.15μm降低至2.78μm,冷板粗糙度由0.047μm降低至0.041μm,冷板表面质量接近修磨工艺。430不锈钢铸坯喷丸工艺可替代修磨工艺。     

轧机主传动直流电动机通风冷却系统的设计与应用

通过实例简述了扎机主传动直流电动机通风冷却系统的风机选择原则,方法及其风机房,风机基础和通风管略的设计与应用。