电力监控系统的跨平台解决方案

随着应用的发展,电力监控系统越来越大型化,跨平台的应用越来越多.本文阐述了采用分层归纳的设计思想,归纳电力系统数据处理的逻辑应用层,包装与具体操作系统密切相关的操作系统层,提炼与具体操作系统进程机制有关的程序框架,来实现电力监控软件系统的跨平台应用.并以C语言为主要编程语言进行了电力监控系统跨平台实现,结果表明该方法能够跨越Windows、Linux、Solaris等平台,达到源代码级的跨平台效果.     

Exponential stability for uncertain neutral systems with Markov jumps

This paper deals with the global exponential stability problems for stochastic neutral Markov jump systems （MJSs） with uncertain parameters and multiple time-delays. The delays are respectively considered as constant and time varying cases, and the uncertainties are assumed to be norm bounded. By selecting appropriate Lyapunov-Krasovskii functions, it gives the sufficient condition such that the uncertain neutral MJSs are globally exponentially stochastically stable for all admissible uncertainties. The stability criteria are formulated in the form of linear matrix inequalities （LMIs）, which can be easily checked in practice. Finally, two numerical examples are exploited to illustrate the effectiveness of the developed techniques.     

云计算技术在区域安全通信中的应用

随着互联网技术的不断发展,网络已成为社会经济发展的重要支撑工具。然而,受限于传统通信技术的约束,网络通信信息存在被共享、泄露等风险。基于云计算技术的区域安全通信技术可以有效解决无线通信技术按身份分配不同通信权限的问题,用户拥有“普通域”与“安全域”功能,以保证通信网络的安全。文中以云计算技术的概念为切入点,阐述了云计算技术在区域通信中的应用价值,最后提出了构建基于云计算区域安全通信系统的具体方案,并通过实验验证了该系统具有良好的应用性能。     

Stabilizing Redox-Active Hexaazatriphenylene in a 2D Conductive Metal–Organic Framework for Improved Lithium Storage Performance

Organic redox-active materials are promising electrode candidates for lithium-ion batteries by virtue of their designable structure and cost-effectiveness. However, their poor electrical conductivity and high solubility in organic electrolytes limit the device's performance and practical applications. Herein, the π-conjugated nitrogen-containing heteroaromatic molecule hexaazatriphenylene (HATN) is strategically embedded with redox-active centers in the skeleton of a Cu-based 2D conductive metal–organic framework (2D c-MOF) to optimize the lithium (Li) storage performance of organic electrodes, which delivers improved specific capacity (763 mAh g⁻¹ at 300 mA g⁻¹), long-term cycling stability (≈90% capacity retention after 600 cycles at 300 mA g⁻¹), and excellent rate performance. The correlation of experimental and computational results confirms that this high Li storage performance derives from the maximum number of active sites (CN sites in the HATN unit and CO sites in the CuO₄ unit), favorable electrical conductivity, and efficient mass transfer channels. This strategy of integrating multiple redox-active moieties into the 2D c-MOF opens up a new avenue for the design of high-performance electrode materials.     

Lightweight deep learning methods for panoramic dental X-ray image segmentation

Neural Computing and Applications - Dental X-ray image segmentation is helpful for assisting clinicians to examine tooth conditions and identify dental diseases. Fast and lightweight segmentation...     

2D Bi2O2Te Semiconductor with Single-Crystal Native Oxide Layer

Following logic in the silicon semiconductor industry, the existence of native oxide and suitable fabrication technology is essential for 2D semiconductors in planar integronics, which are surface-sensitive to typical coating technologies. To date, very few types of integronics are found to possess this feature. Herein, the 2D Bi₂O₂Te developed recently is reported to possess large-area synthesis and controllable thermal oxidation behavior toward single-crystal native oxides. This shows that surface-adsorbed oxygen atoms are inclined to penetrate across [Bi₂O₂]_n²ⁿ⁺ layers and bond with the underlying [Te]_n²ⁿ⁻ at elevated temperatures, transforming directly into [TeO₄]_n²ⁿ⁻ with the basic architecture remaining stable. The oxide can be adjusted to form in an accurate layer-by-layer manner with a low-stress sharp interface. The native oxide Bi₂TeO₆ layer (bandgap of ≈2.9 eV) exhibits visible-light transparency and is compatible with wet-chemical selective etching technology. These advances demonstrate the potential of Bi₂O₂Te in planar-integrated functional nanoelectronics such as tunnel junction devices, field-effect transistors, and memristors.     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Design techniques for voltage-to-time converters with nonlinearity emphasis

This paper provides an in-depth treatment of voltage-to-time converters (VTCs) for time-based signal processing with a nonlinearity emphasis. The need for VTCs in deployment of time-based techniques for high-speed or high-resolution analog-to-digital converters is investigated. It is followed with the classification of VTCs. A detailed treatment of the principle, topology, operation, and design consideration of variable-slope (VS) and constant-slope (CS) VTCs is provided. The nonlinearity of VS-VTCs and that of CS-VTCs are analyzed in detail analytically. It is shown that VS-VTCs is inherently nonlinear while CS-VTCs is intrinsically linear. Factors contributing to the nonlinearity of these VTCs are investigated. VS-VTCs and CS-VTCs studied are designed in TSMC 130 nm 1.2 V CMOS and analyzed using Spectre from Cadence Design Systems with BSIM3.3 device models. A good agreement between simulation and analytical results is obtained. The average gain of the VS-VTC is 4.4 times that of the CS-VTC. The 2nd and 3rd harmonics of the CS-VTC are significantly smaller as compared with those of the VS-VTC at the price of more power consumption.

     

Avoiding negative elastic moduli when using Lagrange interpolation for material grading in finite element analysis

Polynomial interpolations, one of the most common interpolations used in finite element methods (FEMs), are a workhorse of many FEM codes. These interpolations are readily available for all kinds of elements, and using them for modeling the variation of elastic moduli in graded elements is thus both convenient and natural. Yet, like all polynomial interpolations, they can be prone to oscillations that can result in regions of negative elastic modulus in the element, even with only positive nodal values of elastic moduli. The result of these negative modulus regions, even if the region is small, can be unexpected singularities in the solution. This defeats the purpose of using polynomial interpolations for capturing material grading in the element. We demonstrate the issue using three-node quadratic Lagrange interpolations of material grading in otherwise isoparametric p-type elements and show how to avoid this problem.