Influence of content and creator characteristics on sharing disaster-related information on social media

Identifying the key factors of the disaster-related information propagation process can provide decision support for disaster management. This study characterizes the effects of content types, location, and social capital of social media users on the virality of disaster-related information. We found through the Weibo dataset of the Yiliang earthquake that the virality of different types of information can vary on the basis of the social capital of users who post the information. This study fills the current research gaps by examining the individual and joint effects of the content and creator characteristics on the virality of disaster-related information.     

Incorporating Actor-Critic in Monte Carlo tree search for symbolic regression

Neural Computing and Applications - Most traditional genetic programming methods that handle symbolic regression are random algorithms without memory and direction. They repeatedly search for the...     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

电子和β射线两用外推电离室的研制

本文研制了一台测量电子束和β射线吸收剂量的外推电离室,其空腔室壁材料可拆换并分别与空气、组织和硅等效,收集电极名义直径为1.5、3、10和30mm,空气空腔可变范围为0.2～15mm。该外推电离室具有在空腔内部测温,自动改变窗口上方材料厚度及采用微型计算机控制等特点。适用于测10 MeV能量以下,剂量率为10~5～10~(-3)Gy/h的电子或β射线吸收剂量。整个外推电离室自动测剂量系统在测~(204)TLβ放射源表面剂量率的不确定度为2.3％。测1.5 MeV电子束在硅和哈密瓜深部剂量率时,不确定度分别为4.0％和2.8％。     

Modulation on the electrical and optical properties of Na and Rh co-doped Ruddlesden-Popper layered Ca3Ti2O7

Layered perovskite Ca_2.91Na_0.09Ti_2-xRh_xO₇ (x?=?0.00, 0.02, 0.04, 0.06) were synthesized by a conventional solid-state reaction. Room temperature ferroelectricity has been confirmed. The remanent polarization increases with an increase of Rh content, which is due to a larger oxygen octahedral distortion by Rh doping. The coercive field increases with Rh doping as the pinning effect of oxygen vacancies reduce the mobility of domain wall. Remanent polarization and coercive field are caused by different mechanisms, so it is possible to modulate them independently to meet the requirement of application in ferroelectric field. The concentration of oxygen vacancy increased with Rh doping, leading to the significant increase of leakage current density. The bandgap of samples doped with Rh drastically decrease and the visible light response of the sample was improved by Rh doping due to the formation of impurity energy levels within the band gap.

     

电极表面处理和电极材料对微型点焊时电极粘附的影响

研究了电极表面处理和电极材料对镀镍钢板和镍板微型点焊时电极粘附的影响。结果表明：电极表面涂敷TiC后能提高CuCrZr电极和GlidCop60电极的抗粘附性能，其原因是涂层中的TiC能阻碍电极和镀镍板之间的局部焊接；GlidCop60电极的抗粘附性能优于CuCrZr电极的抗粘附性能，其原因是弥散分布于GlidCop60电极中的Al2O3能阻碍电极和镀镍板之间的局部焊接。     

塑料包装应用及技术进展

塑料在包装领域有着广泛的应用，其中聚酯（PET）性能优良，应用领域不断扩大。介绍了塑料包装不断通现的新技术，以及塑料包装环保问题的几点思路。     

碱土金属在萃取剂与树脂间反应平衡常数的测定

研究了碱土金属离子在Ｄ００１树脂与８－羟基喹啉三氯甲烷溶液间的平衡常数Ｏ－ｔＫ的测定。其值依Ｍｇ、Ｃａ、Ｓｒ、Ｂａ次序减小。并得出萃取剂浓度［ＨＡ］。与金属离子在两相分配的关系。     

α,β,γ,δ-四-(4-吡啶)卟啉分光光度法测定瓷餐具铜溶出量

本文提出用α，β，γ，δ-四-（4-吡啶）卟啉为显色剂，分光光度法测定瓷餐具铜的溶出量，该方法灵敏度高，选择性好，可以不经分离，直接对试样进行测定，操作简便，结果满意。