基于布尔代数的海底管道风险评价方法研究与应用

根据目标管道的实际情况,将目标海底管道分为平台立管段、海域管段、人工岛登陆段3段,确定了第三方损坏、腐蚀、制造与施工缺陷、误操作4个一级风险因素,细化二级风险因素,建立了包含23个指标的风险评价指标体系.对指数和相加的方法进行改进,把各项风险分值进行归一化处理,量化至0～1之间,基于布尔代数,运用故障树的逻辑或原理,计算失效概率和泄漏影响系数,得到改进后的海底管道半定量风险评价模型,解决了传统模型中的风险值相加导致的风险遮蔽问题.     

La3+ 掺杂对 CeO2 红外发射性能的影响研究

随着飞行器飞行速度和发动机燃烧室温度的提高, 金属类隐身涂层材料已无法满足环境使用要求。 CeO2 具有较高熔点、 抗氧化、 较低红外发射率等特点, 被认为是红外隐身应用的候选材料, 但其发射率仍无法满足 高温红外隐身需求。 本文通过固相反应法对 CeO2 进行 La3+ 掺杂改性, 研究掺杂量对 CeO2 粉体红外发射性能的 影响规律。 结果表明, 随着掺杂量从 10 mol% 增加到 30 mol%, 粉体在 3~6 μm 波段的发射率不断降低, 其中 Ce0.7La0.3O2 的红外发射率仅为 0.1。     

Ti9Al合金的氢塑性效应

采用真空自耗电弧炉熔炼制备Ti9Al合金，通过渗氢处理显著提高氢含量，在凸轮塑性试验机ЧПИ-2上以10mm／min的速度进行热模拟试验。研究发现：氢可以降低Ti9Al合金的相变温度，扩大α β区的温度范围；氢作为卢稳定剂会妨碍或完全抑制以Ti3Al为基的α2相的析出；钛合金的氢合金化可促使卢相在更低温度下稳定化，明显地提高了Ti9Al合金塑性。     

Effects of Austempering after Hot Deformation on the Mechanical Properties of Hot Rolled Si-Mn TRIP Steel Sheets

Excellent mechanical properties are obtained by austempering after hot deformation without subsequent heat treatment in the present Si-Mn TRIP steel sheets. Isothermal holding time after finishing rolling has affected the mechanical properties of this steel. The results show that the sample exhibits a good combination of ultimate tensile strength and total elongation when it is held at the bainite transformation temperature after hot deformation. The stability of retained austenite increases with an increase of isothermal holding time, and a further increase in the holding duration results in a decrease of it. The tensile strength, total elongation and strength ductility reach the maximum values (774MPa, 33% and 25542MPa% respectively) for this sort of hot rolled Si-Mn TRIP steel using the optimal technology.     

AZ91D热化学反应热喷涂陶瓷涂层耐蚀性研究

在镁合金AZ91D表面使用火焰喷涂制备陶瓷涂层，陶瓷涂层粉末配方为Al2O3＋TiO2＋SiO2＋ZnO＋Al。在喷涂制备涂层过程中伴随热化学反应的进行，涂层X射线分析发现，涂层内有MgSiO4、MgAl2O4等新相生成。耐蚀性试验表明，涂层的耐酸性能比基体提高了4倍，耐盐性能提高了1倍。     

等离子喷涂纳米Al2O3-13%TiO2涂层组织与性能

采用大气等离子喷涂方法制备了纳米结构Al2O3-13%TiO2(质量分数,下同)涂层,进行了SRV滑动磨损试验,通过扫描电镜对涂层的断口显微组织及磨损表面形貌进行了观察,并测定了涂层的显微硬度.结果表明,该纳米涂层具有独特的显微组织结构特征,层片间具有冶金结合特征的界面较多,界面结合得到明显改善,其显微硬度明显高于微米涂层,具有优良的耐磨性能,其磨损面积仅为常规微米涂层的1/5,界面结合改善是耐磨性提高的主要原因.     

红河州磷肥厂6万t／a半水－二水法磷酸装置试生产情况

主要介绍了红河州磷肥厂引进的６万ｔ／ａ半水一二水法磷酸生产技术及三年来该装置的试生产情况，着重介绍了针对试生产中存在问题进行的技术改造。现该套装置运行正常，生产指标已接近设计值。     

Study on structure-property relationship of polyimide blends

Summary Three pairs of polyimide/polyimide blends (50/50 wt%) with different molecular structures were prepared by two ways, i.e. mixing of the polyamic acid precursors with subsequent imidization, and direct solution mixing of the polyimides. The blends were studied with DMA technique. The results obtained show that all the blends prepared with these two different ways are miscible, as there existed only one glass transition temperature (Tg) for all the blends. It is suggested that the miscibility of these polyimide/polyimide blends is a result of the strong inter-molecular charge-transfer interaction between the chains of their components.     

非水溶剂回滴法测定低镍甲烷化催化剂的表面酸性

本文采用非水溶剂回滴法测定了低镍甲烷化催化剂和载体γ—Al2O3的表面酸性，并与催化剂的活性、组成、比表面积关联。实验结果说明，助剂的种类、含量对表面酸性有明显影响，催化剂催化活性与表面酸性关系不大。     

Influence of organophilic clay and preparation methods on EVA/montmorillonite nanocomposites

Ethylene‐vinyl acetate copolymer (EVA)/montmorillonite MMT nanocomposites have been prepared by using different methods: one is from the organophilic montmorillonite (OMT) and the other is from the pristine MMT and reactive compatibilizer hexadecyl trimethyl ammonium bromide (C16). In this study, different kneaders were used (twin‐screw extruder and twin‐roll mill) to prepare nanocomposites. The nanocomposite structures are evidenced by the X‐ray diffraction (XRD) and high‐resolution electronic microscope (HREM). The thermal properties of the nanocomposites were investigated by thermogravimetric analysis (TGA). Moreover, the tensile tests were carried out with a Universal testing machine DCS‐5000. It is shown that different methods and organophilic montmorillonite have influence on EVA/MMT nanocomposites.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2416–2421, 2004