铝型材加工氧化着色污水处理的工程实践

采用中和—加药混凝—沉淀—压滤除渣的方法处理铝型材加工氧化着色污水。出水pH值及悬浮物等指标满足《污水综合排放标准》GB8978—96中一级排放标准。改气浮法为沉淀法,采用竖流式沉淀池,简化工艺流程,缩短处理时间,节约投资与运行费用。     

粉煤灰内燃烧结砖内燃料发热量确定的探讨(二)

介绍燃料发热量的基本知识，阐明粉煤灰内燃砖内燃料的发热量，应以内燃料燃烧放出的实际用于砖烧成的热量为科学依据，进行科学合理的确定。     

An Attractive Synthetic Approach to Methyl Formate from Methanol via Methyl Nitrite

Catalytic synthesis of methyl formate has been investigated by a novel route starting from methyl nitrite in vapor phase. The acidic sites of the catalysts play a crucial role for the catalytic activity and the selectivity of formation of methyl formate. The H-Y zeolite catalyst gave higher yield and selectivity of the target product. This study provides a new approach for the synthesis of methyl formate from methanol via methyl nitrite.     

配位离子液体［3（CH3CH2）4N+Cl-·（NH2）2CO］的合成及表征

采用尿素和氯化四乙基铵为原料，合成了一种新型的配位离子液体，并通过红外和X－射线粉末衍射对其结构进行了表征。结果表明，尿素和氯化四乙基铵发生反应，使得原来尿素羰基峰由1690.72cm－1转移到了1619.10cm－1。由X－射线粉末衍射图可以看出，在2θ = 30.37°处有新的衍射峰。通过差热－热重分析，配位离子液体在室温到250℃可以稳定存在，与其他有机溶剂相比具有良好的稳定性。     

水溶性富勒烯衍生物的设计合成及在生物医药中的应用

介绍了水溶性富勒烯衍生物在抗艾滋病、DNA的裂解、消除自由基和抗菌等方面的应用,及一些水溶性富勒烯衍生物的设计合成。     

利用氯碱厂废弃盐泥制备NO3-吸附剂

将氯碱厂废弃盐泥与丙烯酸、钛酸四正丁酯等共聚，过硫酸钾作引发剂，制得TNO3^-吸附剂，同时还得到了有利用价值的二氧化硅和碳酸钙。用正交试验法与单纯形优化法相结合，确定了废弃盐泥制备NO3^-吸附剂的优良配方及合适的工艺。增添了水净化剂的新品种，探索了氯碱工业废弃盐泥利用的新途径。     

微波法合成复合氨基酸亚铁的工艺研究

以鸡羽毛为原料,正交实验法探讨了微波法制备复合氨基酸与亚铁螯合的最佳条件。结果表明,复合氨基酸微波水解优化条件为:固液比1∶5 g/mL,水解时间3 h,硫酸浓度3 mol/L,微波功率500 W,在该优化条件下,复合氨基酸转化率为63.6%;复合氨基酸亚铁微波合成优化条件为:复合氨基酸与铁的配位比2∶1,反应时间40 m in,微波功率400 W,在该优化条件下,复合氨基酸亚铁螯合率为83.4%。     

Three-dimensional modelling of Non-Newtonian fluid flow in a coat-hanger die

The three-dimensional model of isothermal flow of power-law fluid in a coat-hanger die has been developed using finite element method. The shape of coat-hanger die used in the present model was determined according to the previous analytical design equation which is based on one-dimensional flow model in the manifold and the slot. Because uniform flow rate across the die outlet is most important to achieve uniform thickness of extruded polymer sheet or film, flow rate distribution is mainly examined to determine the valid process condition for the design equation as the design parameters are changed. The effects of fluid property in terms of power-law index and process parameters not considered in one-dimensional design equation such as die inlet size and the presence of land were analyzed. Results show that the manifold angle is the most influencing design parameter on flow rate distribution. When the material of different power-law index from design value is processed, the change of power-law index affects the uniformity of flow rate appreciably.     

铁电晶体TGS的快速生长

报道了TGS晶体的溶液状态及其快速生长的实验结果。发现了pH为2.52的溶液是实现快速生长的最佳溶液,利用快速旋转叶片来加速溶液对流,对于截面积为40mm×40 mm的(010)面,其生长速度达到了5mm/d,对快速生长的TGS晶体的性能研究表明:其热电和介电性能也发生了一些变化。     

电-Fenton法处理硝基苯废水的试验研究

以多孔石墨作为阴极,以铁板作为阳极,并向阴极不断通入空气,电解过程中生成的H2O2与阳极溶解的Fe2+形成Fenton试剂,利用Fenton试剂在电解的过程中产生的大量活性羟基OH的强氧化作用来氧化降解废水中的有机物.试验证明在电-Fenton法最佳反应条件下,硝基苯迅速降解,去除率可以达到87%以上.