减小OFDM信号出现大峰平比的研究方法PTS法

介绍OFDM系统的OFDM信号峰平比 (PAPR)的概念 ,研究减小OFDM信号PAPR值方法的Par tialTransmitSequences(PTS)。     

Investigation of the Effects of some Parameters in the Production of Chromate from Chromite Ores in Iskenderun Region

The conversion of chromite ore from iskenderun region into chromate was investigated. Firstly, the chromite ore was analysed using conventional chemical methods. Then, the effect of some parameters such as roasting time, temperature and the amount of additives on the conversion efficiency to the chromate was examined. The optimum roasting conditions were determined as 300°C, 2 hours, 10 times the stoichiometrically required amounts of NaClO₃ and 6 times the stoichiometrically required amounts of KOH. Under these conditions, the maximum recovery of chromate was found to be 100%. The product obtained from the roasting process was leached with water to produce a clean chromate solution. The effect of temperature and solid/liquid (S/L) ratio was investigated in the water leaching experiments. The optimum experimental results obtained were 100% at a 1:5 solid to water ratio at 25°C and 20 min leaching period. The chromate solution was purified using conventional purification processes.     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

一种基于模式搜索的大尺寸测量移站坐标转换方法

针对空间大尺寸测量的移站坐标转换，提出了最小二乘坐标转换数学模型和基于模式搜索的参数求解方法，实验证明该方法具有理论正确性和实际可行性。     

A histopathologic study of direct pulp-capping with adhesive resins

The concentration of heat-shock proteins of 70 kD (HSP70) in heart tissue has been shown to increase during transient myocardial ischaemia and to persist during several hours of reperfusion. In this study the relationship between the local myocardial HSP70 concentration and blood flow was addressed for control physiological conditions and acute myocardial ischaemia. A specific aim of this study was to address the question of whether low flow areas under control physiological conditions have undergone a transient ischaemia during the preceding hours and thus may be in a state of hibernation or stunning. In 12 anaesthetized, open-chest beagle dogs (6 control and 6 with 60-min coronary artery stenosis) heart rate, mean aortic pressure, mean arterial partial pressure of O2 and partial pressure of CO2 averaged 85+/-16 beats/min, 94+/-14 mmHg, 102+/-17 mmHg and 39+/-6 mmHg, respectively. Regional HSP70 and myocardial blood flow (RMBF) were measured using an HSP70-enzyme-linked immunosorbent assay and the tracer microsphere technique, respectively, in samples of 250 mg wet mass. In the control group the mean RMBF was 1.06+/-0.59 ml.min-1.g-1 and the local HSP70 concentration was 7.08+/-1.03 microg/mg cytosolic protein. Myocardial HSP70 showed a blood flow-independent regional biological heterogeneity, equivalent to a coefficient of variation of 0.31. Local HSP70 concentrations did not differ (P>0.05) between control low and high flow samples, 6.16+/-1.0 vs 6.08+/-0.75 microg/mg cytosolic protein, respectively. However, after 60 min of coronary artery occlusion the local HSP70 concentration increased from 7.08 +/-1.03 to 13.43+/-3.19 microg/mg cytosolic protein (P<0. 001). There was a significant inverse relationship between the percent reduction of local blood flow and HSP70 (r=-0.56, P<0.001). From these results it is concluded that: (1) low flow samples under control physiological conditions are unlikely to be in a state of hibernation or stunning since their HSP70 concentration is normal and (2) the increase in the local HSP70 concentration during myocardial ischaemia reflects the degree of impairment of O2 delivery.     

An experimental study on air window collector having a vertical blind for active solar heating

In this study, an air window collector having vertical black blinds was investigated experimentally under actual outdoor conditions. The vertical blind was installed between two 120 × 80 cm glass panes. It can rotate about the vertical axis. The fully open position makes a 90° angle with the vertical plane. A commercially available blind made of cloth and coated with black paint was tested. The air circulation in the system is provided by a fan parallel to blinds. Various parameters were measured and recorded using a data acquisition system. The effect of these parameters on the thermal performance of the system were determined experimentally.     

Corrosion morphologies on magnesium alloy AZ 91

Initiation and early propagation of pitting and filiform corrosion on bare alloy AZ91 (9% Al, 1% Zn) are investigated by natural immersion corrosion tests, electrochemical measurements and microanalytical studies. Initiation sites are few. Corrosion spreads from these sites first in the form of filiform corrosion for a limited period of time and pitting which later develops into a cellular type of etching. The important factors affecting filiform corrosion are temperature, material structure and degree of polarization at the anodic sites. Filiform attack on AZ91, unlike the classical mechanisms of filiform corrosion on coated metals, is driven by hydrogen evolution reaction on the cathodic sites of the surface, occurs under significant anodic control, propagates at a high, constant speed independent of degree of polarization along preferential paths determined by compositional and crystallographic factors, and is a temporary phenomenon under open circuit conditions. Pitting corrosion is more predominant with decreasing anodic polarization.     

对聚合物驱单井效果评价的几点认识

通过对喇嘛甸油田聚合物驱单井效果分析，给出了采油井阶段效果评价方法，即单井见效时间和含水回升时间早晚的确定方法，单井见效时间取决于油层条件，注聚前含油饱和度及累计采出地下体积倍数，单井含水回升时间主要取决于聚驱阶段剩余储量采出程度，根据单井阶段评价结果，对试验区进行跟踪调整，在单井阶段效果评价的基础上，对单井最终效果采用吨聚增油量和聚驱阶段剩余储量采收率来进行客观，有效的评价，对聚驱产量预测具有一定指导意义。     

Forecasting based on sectoral energy consumption of GHGs in Turkey and mitigation policies

Recently, global warming and its effects have become one of the most important themes in the world. Under the Kyoto Protocol, the EU has agreed to an 8% reduction in its greenhouse gas (GHG) emissions by 2008–2012. The GHG emissions (total GHG, CO₂, CO, SO₂, NO₂, E (emissions of non-methane volatile organic compounds)) covered by the Protocol are weighted by their global warming potentials (GWPs) and aggregated to give total emissions in CO₂ equivalents. The main subject in this study is to obtain equations by the artificial neural network (ANN) approach to predict the GHGs of Turkey using sectoral energy consumption. The equations obtained are used to determine the future level of the GHG and to take measures to control the share of sectors in total emission. According to ANN results, the maximum mean absolute percentage error (MAPE) was found as 0.147151, 0.066716, 0.181901, 0.105146, 0.124684, and 0.158157 for GHG, SO₂, NO₂, CO, E, and CO₂, respectively, for the training data with Levenberg–Marquardt (LM) algorithm by 8 neurons. R² values are obtained very close to 1. Also, this study proposes mitigation policies for GHGs.