钢筋砼压弯剪构件抗震性能试验研究

本文根据146根钢筋砼压弯剪构件的试验结果,分析了压弯剪构件在低周往复荷载作用下的破坏形态,并提出了相应于各种破坏形态的强度计算方法。建立了低周往复荷载作用下压弯剪构件的延性系数及极限转角的计算公式和防止粘结破坏的构造措施。     

全国土壤中天然放射性核素含量调查研究（1983—1990年）

中国土壤中天然放射性核素含量调查(1983—1990年)是中国环境天然放射性水平调查研究的一部分。本文作为分报告之一,系根据全国29个省、市、自治区(不包括台湾省,海南省包括在广东省内)的调查结果整理编写而成,主要报告这项调查的方法和结果。本调查在全国按均匀网格布点,并区分不同成土母岩母质、土壤类型进行加密布点,在天然γ辐射剂量率局部异常地区以及部分核企业和放射性伴生矿等对环境可能产生放射性污染的地区,也作了加密布点。本调查布点区域复盖面积约占全国总面积的80%。采样点基本与陆地γ辐射剂量率测点同位布设,土壤采样与陆地γ辐射剂量率测量同步进行。全国共采集土壤样品13866份;分析测量了11216份,其中网格点样品9114个,加密点样品2102个。本报告主要结果由7777个25×25和50×50 km 的基本网格点分析数据统计得到。本调查主要结果如下:(1)全国土壤中天然放射性核素~(238)U、~(226)Ra、~(232)Th、~(40)K 含量按面积加权平均值(±单次测量标准差)分别为39.5(±34.4)、36.5(±22.0)、49.1(±27.6)、580.0(±202.0)Bq·kg~(-1),范围值分别为1.8—520.0、2.4—425.8、1.0—437.8、11.5—2185.2 Bq·kg~(-1)。(2)土壤中天然放射性核素含量与成土母岩母质类型明显相关。由1552个不同成土母岩     

Toward automatic phenotyping of developing embryos from videos.

We describe a trainable system for analyzing videos of developing C. elegans embryos. The system automatically detects, segments, and locates cells and nuclei in microscopic images. The system was designed as the central component of a fully automated phenotyping system. The system contains three modules 1) a convolutional network trained to classify each pixel into five categories: cell wall, cytoplasm, nucleus membrane, nucleus, outside medium; 2) an energy-based model, which cleans up the output of the convolutional network by learning local consistency constraints that must be satisfied by label images; 3) a set of elastic models of the embryo at various stages of development that are matched to the label images.     

On uniform observation of nonuniformly observable systems

In [4,7,9,12], classes of nonlinear systems are considered for which observers can be designed. Although observability of nonlinear systems is known to be dependent on the input, the proposed observers have the property that the estimation error decays to zero irrespective of the input. In the first part of this paper, it is shown that this phenomenon follows from a common property of these systems: for all of them, the “unobservable states” with respect to some input, are in some sense “stable” (in the linear case, these systems are called detectable), and for this reason, a reduced order observer can be designed. In the second part is given a more general class of nonlinear systems for which such an observer can be designed.     

The State of the Art of Spatial Interfaces for 3D Visualization

We survey the state of the art of spatial interfaces for 3D visualization. Interaction techniques are crucial to data visualization processes and the visualization research community has been calling for more research on interaction for years. Yet, research papers focusing on interaction techniques, in particular for 3D visualization purposes, are not always published in visualization venues, sometimes making it challenging to synthesize the latest interaction and visualization results. We therefore introduce a taxonomy of interaction technique for 3D visualization. The taxonomy is organized along two axes: the primary source of input on the one hand and the visualization task they support on the other hand. Surveying the state of the art allows us to highlight specific challenges and missed opportunities for research in 3D visualization. In particular, we call for additional research in: (1) controlling 3D visualization widgets to help scientists better understand their data, (2) 3D interaction techniques for dissemination, which are under‐explored yet show great promise for helping museum and science centers in their mission to share recent knowledge, and (3) developing new measures that move beyond traditional time and errors metrics for evaluating visualizations that include spatial interaction.     

THERMAL DEBINDING OF A NEW BINDER

ＴＨＥＲＭＡＬＤＥＢＩＮＤＩＮＧＯＦＡＮＥＷＢＩＮＤＥＲ①ＺｈｏｕＪｉｃｈｅｎｇ，ＨｕａｎｇＢａｉｙｕｎ，ＷｕＥｎｘｉ，ＹｕＬｉｇｏｎｇ，ＱｕＸｕａｎｈｕｉＮａｔｉｏｎａｌＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄｅｒＭｅｔａｌｕｒｇｙ，Ｃｅｎｔｒａ...     

钼变形抗力的研究

在Gleeble-1500热模拟试验机上，分析钼的高温变形特征，其变形温度为1100～1400℃，变形速率为1-50s^-1，变形程度为0-0．6，并对钼板进行塑性变形抗力的研究，采用非线性回归方法建立钼板的变形抗力模型。获得了钼板的变形抗力曲线图，对不同的数学模型结构进行回归比较，提出拟合精度高的变形抗力的数学模型，该模型具有较高的精度及良好的数值稳定性。     

Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS,XANES and XPS Analyses of Phases After Oxidation,Reduction, and Reaction

Catalysis Letters - Industrial Cu/ZnO/Al2O3 or novel rate catalysts, prepared with a photochemical deposition method, were studied under functional CH3OH synthesis conditions at the set temperature...     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...