多元合金化大断面球墨铸铁组织和性能的分析

为了提升大断面球墨铸铁综合力学性能，通过复合添加微量合金元素铜、锑、锡、钼对大断面球墨铸铁进行微合金化处理，借助金相显微镜(OM)、扫描电子显微镜(SEM)及力学性能测试等手段，研究了Cu Sb Sn Mo复合微合金化大断面球墨铸铁微观组织和力学性能。结果表明，试验球墨铸铁具有良好的综合力学性能。大断面球墨铸铁中添加铜、锑、锡、钼后优化了材料的组织结构，基体组织为珠光体＋少量牛眼状铁素体；试样石墨组织细小、圆整，分布均匀。同时，合金元素的复合加入使得其抗拉强度达到800 MPa以上，硬度约为280HB，伸长率达到5%以上。拉伸断口分析表明，微合金化大断面球墨铸铁断裂模式以解理断裂为主，伴有少量的塑性变形。     

Methodology for optimization of pouring variables using bottom pour for low masses of SS304 (<300 kg) in investment casting process (case study)

Bottom pour ladles with stopper rod systems are commonly used in the metal casting industry. However, stopper rod bottom-pouring systems have not yet been developed for the lower thermal masses of alloys typically used in the investment casting industry. Large thermal masses used with bottom pour systems are typically limited for ladles larger than 700 kg and to certain alloys with higher fluidity and longer solidification time like cast iron, aluminum alloys etc. In this study, bottom pour ladle designs and low thermal mass refractory systems have been developed and evaluated in production investment foundry trials with 300 kg pouring ladle. The ladles system and pouring practices used will be described along with the results from the pouring trials for SS304 that represents typical alloys used in Investment casting industries. Optimization of the variables used in an experimentation using Genetic algorithm is also explained.     

Iron mediated cathodic electrosynthesis of hausmannite nanoparticles

A novel synthetic route has been proposed to prepare hausmannite nanoparticles. The synthetic route comprises an iron mediated constant current cathodic electrodeposition of manganite and heat treatment of the latter to obtain hausmannite. The obtained nanostructures have been characterized using X-ray Diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and Fourier transform Infrared Spectrometry (FTIR). The role of iron in the formation of manganite precursor has been studied by cyclic voltammetry (CV) and differential thermal analysis (DTA). A formation mechanism based on iron mediated formation of Mn³⁺ and subsequent cathodic reduction of the disproportionated products has been proposed accordingly. The prepared nanoparticles exhibited specific capacitance of 143 F g⁻¹ in 0.5 M Na₂SO₄ solution. The retained specific capacity was 87% after 2000 cycles.     

An efficient video summarization for surveillance system using normalized k-means and quick sort method

There has been a vast augmentation in quantity of Video Content (VC) generated amid the last some years. The Video Summarization (VS) approach is introduced for managing the VC. Prevailing VS techniques have endeavored to render the VS but the systems have Execution Time (ET) as well as condensing the video's content in domain specific manner. To triumph over such disadvantages, this paper proposed efficient VS for surveillance system using normalized k-means along with quick sort method. The proposed technique comprises eight stages, like split video into frames, pre-sampling, provide ID number, feature extraction, Feature Selection (FS), clustering, extract frames, video summary. Initially, the video frames are pre-sampled utilizing the proposed Three Step Cross Searching Algorithm (TSCS) technique. Then, give the ID number for every frame. Next, the features are extracted as of the frames. Then, the necessary features are selected using Entropy based Spider Monkey Algorithms (ESMA). In next stage, the features are grouped using Normalized K-Means (N-Kmeans) algorithm for identifying best candidate frames. Then select the minimum distance value based cluster set is the Key Frame (KF) selection. At last, the video is orderly summarized using quick sort method. Finally, in experimental evaluation the proposed work is compared with the prevailing methods. The proposed VS gave better outcome than the existing approaches.     

Comparative evaluation of the mesophilic and thermophilic biohydrogen production at optimized conditions using tequila vinasses as substrate

The objective of this work was to comparatively evaluate the production of biohydrogen (bio-H₂) from tequila vinasses at optimized mesophilic and thermophilic conditions and to elucidate the main metabolic routes involved. Optimal temperatures of 35 °C and 55 °C, and pH of 5.5 maximized the bio-H₂ production rates, 25.5 ± 0.01 NmL h⁻¹ and 169.9 ± 8.9 NmL h⁻¹ in the mesophilic and thermophilic regimens, respectively. During the operation of anaerobic sequencing batch reactors, the thermophilic process allowed a volumetric bio-H₂ production rate of 519 ± 13 NmL-H₂ L⁻¹ d⁻¹ equivalent to 750 ± 19 NmL-H₂ L_vinasse⁻¹, while the mesophilic one 448 ± 23 NmL-H₂ L⁻¹ d⁻¹ and 647 ± 33 NmL-H₂ L_vinasse⁻¹, respectively. Furthermore, the gas produced under thermophilic conditions showed high hydrogen content (86.5%). Finally, formate degradation and glucose fermentation to acetic and butyric acids were the main metabolic routes involved in bio-H₂ production under thermophilic conditions, while at mesophilic conditions, the lactate and formate degradation pathways governed.     

Effects of ethylene-octene copolymer (POE) on the brittle to ductile transition of high-density polyethylene/POE blends

Three kinds of ethylene-octene copolymers (POE) were melt-blended with high-density polyethylene (PE-HD) in different proportions. Detailed characterizations were conducted to analyze their structural differences of POE and its effects in toughening PE-HD. The higher molecular weight POE can improve the toughness of PE-HD. 60:40 PE-HD/POE is elongated to break up to 700% while impact strength is 84.7 kJ/m² at −30°C, which is 21-fold of PE-HD. In the brittle to ductile transition (BDT) during impact, the fracture mechanism changes from the crazing mode to the shear yield-plastic deformation mode. The BDT temperature decreases as the POE molecular weight and its content increase. The interface strength in tension is estimated to access their effects. The Boltzmann-type models were successfully extended to describe the typical S-shaped curves in BDT of notched impact strength vs POE content or temperature. The supplementary decay model is suggested for the attenuation in toughening. Transition map in impact is proposed to select the use range of composition (c ) and temperature (T ) for high toughness. The curves are converted into 3D graph of T -c -impact strength for illustrating their coupling-separate effects, and further into the contour map of impact strength in T -c space for finding their partial equivalence.     

A multi-start central force optimization for global optimization

Central force optimization (CFO) is an efficient and powerful population-based intelligence algorithm for optimization problems. CFO is deterministic in nature, unlike the most widely used metaheuristics. CFO, however, is not completely free from the problems of premature convergence. One way to overcome local optimality is to utilize the multi-start strategy. By combining the respective advantages of CFO and the multi-start strategy, a multi-start central force optimization (MCFO) algorithm is proposed in this paper. The performance of the MCFO approach is evaluated on a comprehensive set of benchmark functions. The experimental results demonstrate that MCFO not only saves the computational cost, but also performs better than some state-of-the-art CFO algorithms. MCFO is also compared with representative evolutionary algorithms. The results show that MCFO is highly competitive, achieving promising performance.     

A design of a robust discrete-time controller

In this paper, we proposed a robust discrete-time controller. This control system, which is derived from the idea of the normalized plant, does not include plant parameters. Thus, we obtain a control system independent of plant parameters and that has the same structure as a conventional optimal servo control system. Simulation and experimental results show that the proposed method is fairly robust to plant parameter variations and external disturbances.