Efficient use of route requests for loop-free on-demand routing in ad hoc networks

On-demand routing protocols flood a route request (RREQ) identified by a unique source-sequenced label (SSL) to build directed acyclic graphs (DAG) consisting of possible paths to destinations, and use reverse paths along such DAGs to send route replies from the destinations. We present the first framework that uses only the SSL of the RREQ to establish loop-free paths without requiring additional mechanisms or information, e.g., per destination-sequence numbers or source routing. We present the Labeled Successor Routing (LSR) protocol, which stores the SSL of the RREQ as a route request label (RRL) at the nodes that participated in the creation of the RREQ DAG. The RRLs allow the source of the RREQ to identify neighbors as loop-free successors to the destination, which reduces network-wide RREQ flooding. Simulations results for scenarios consisting of networks of 50 and 100 mobile nodes show that LSR performs comparably or better than the Dynamic Source Routing (DSR) protocol, the Ad hoc On-demand Distance Vector (AODV) routing protocol, and the Optimized Link State Routing (OLSR) protocol.     

Electrical properties of dysprosium phthalocyanine films

Forty-four nanometers thick films of alkyl-substituted dysprosium phthalocyanine molecules were prepared on carefully cleaned indium tin oxide (ITO) substrates by the spin casting method. UV–vis absorption spectra and dc conduction characteristics were obtained in order to investigate the structure–conduction property relationship. The conduction is Ohmic at low applied voltages but the space charge limited mechanism is prevalent at relatively high voltages. The conductivities of both as-deposited and heat treated films are found to show directionally anisotropic behaviour. The columnar conductivity was found to be significantly large in the liquid crystalline state.     

Dimensional analysis of thermo-fluid-dynamics of high hydrostatic pressure processes with phase transition

In the current paper the dimensional analysis of thermo-fluid-dynamic mechanisms taking place during high pressure treatment of bio-substances is carried out. Both forced and free convection case is described. Additionally, the phase change in the pressurized medium is considered. The significance of several terms in the conservation equation of momentum and energy is estimated. Especially in systems with low velocity of fluid some terms in the governing equations can be neglected, e.g. irreversible transformation of kinetic in thermal energy. The dimensionless numbers/groups that describe the fluid flow and phase transition at high hydrostatic pressure are determined.     

Automatic generation of explanations: AGE

Explaining how engineering devices work is important to students, engineers, and operators. In general, machine generated explanations have been produced from a particular perspective. This paper introduces a system called automatic generation of explanations (AGE) capable of generating causal, behavioral, and functional explanations of physical devices in natural language. AGE explanations can involve different user selected state variables at different abstraction levels. AGE uses a library of engineering components as building blocks. Each component is associated with a qualitative model, information about the meaning of state variables and their possible values, information about substances, and information about the different functions each component can perform. AGE uses: (i) a compositional modeling approach to construct large qualitative models, (ii) causal analysis to build a causal dependency graph, (iii) a novel qualitative simulation approach to efficiently obtain the system's behavior on large systems, and (iv) decomposition analysis to automatically divide large devices into smaller subsystems. AGE effectiveness is demonstrated with different devices that range from a simple water tank to an industrial chemical plant.     

Templated titania films with meso- and macroporosities

Porous TiO₂ films with both mesoporosity and macroporosity were fabricated by a templated sol–gel method for applications, such as dye-sensitized solar cells (DSC), photocatalysis and catalysis. With the incorporation of differently sized pores, the resultant structures exhibit high surface areas and possess interpenetrating aligned pore channels, which are believed to be beneficial for applications where diffusion of reactants to interior surface can be rate limiting. Both liquid and solid TiO₂ precursors can be applied for large area coating in this process. Almost crack-free films were produced by templated coating of pre-synthesized TiO₂ nanoparticles. The measured specific surface area and porosity of synthesized films were in the range of 33–137 m²/g and 61–80%, respectively, depending on the size of the selected template.     

Impossible and ambiguous shading patterns

A smooth object depicted in a monochrome image will often exhibit brightness variation, or shading. A problem much studied in computer vision has been that of how object shape may be recovered from image shading. When the imaging conditions are such that an overhead point-source illuminates a smooth Lambertian surface, the problem may be formulated as that of finding a solution to an eikonal equation. This article will focus on the existence and uniqueness of such solutions, reporting recent results obtained. With regard to existence, shading patterns are exhibited for which there is no corresponding object shape. Specifically, a necessary and sufficient condition is presented for a circularly symmetric eikonal equation to admit exclusively unbounded solutions; additionally, a sufficient condition is given for an eikonal equation to have no solution whatsoever. In connection with uniqueness, we consider eikonal equations, defined over a disc, such that the Euclidean norm of the gradient of any solution is circularly symmetric, vanishes exactly at the disc center, and diverges to infinity as the circumference of the disc is approached. Contrary to earlier influential work, a class of such eikonal equations is shown to possess simultaneously circularly symmetric and noncircularly symmetric bounded smooth solutions.     

Bridging stresses in sintered reaction-bonded Si3N4 from COD measurements

Crack opening displacement measurements on a sintered reaction-bonded Si₃N₄ ceramic obtained in bending tests with edge-V-notched specimens were evaluated. A procedure is proposed which allows a straight-forward evaluation of the experimental results in order to obtain the bridging stresses as a function of crack opening displacements. Bridging stresses up to 160 MPa were found acting over a distance of about 0.4 μm. In addition crack profile measurements were performed for Vickers indentation cracks which could approximately be described by use of the bridging relation obtained.     

Stability of foams and froths in the presence of ionic and non-ionic surfactants

The thin film pressure balance (TFPB) technique was used to measure the kinetics of thinning of single foam films and disjoining pressures in the presence of sodium dodecyl sulfate (SDS) and electrolyte (NaCl). The results were analyzed in view of the Reynolds equation to determine the role of surface forces in film thinning. It was found that film thinning is controlled by surface forces at thicknesses below approximately 200 nm. It was found also that hydrophobic force plays an important role particularly at low SDS and NaCl concentrations. The values of the hydrophobic force constant (K₂₃₂) estimated from the film thinning experiments were used to predict the disjoining pressure isotherms using the extended DLVO theory, which were found to be in excellent agreement with experiment. The TFPB technique was also used to measure the equilibrium thicknesses (H_e) of the foam films stabilized by a non-ionic surfactant, n-octanol, in the presence of NaCl. At a given ionic strength, H_e increased noticeably with increasing octanol concentration at very low concentrations. This observation suggests that hydrophobic force is maximum in the absence of surfactant and decreases with increasing surfactant concentration. The results obtained with the single foam films were used to explain the stability of the three-dimensional foams.     

Desktop inkjet printer as a tool to print conducting polymers

In order to exploit mechanical flexibility of organic-based electronic devices, conducting polymer anodes, such as polyaniline or poly(3,4-ethylenedioxy)-thiophene-poly(styrene sulfonate) (PEDOT-PSS), have been extensively studied. Along with the use of solution based processing techniques, conducting polymers can simplify the device fabrication procedure and yield themselves easily to printing techniques. In this paper, we present the results of utilizing desktop inkjet printer as a tool for direct printing and patterning of conducting polymer. Design of printable patterns and adjustment of printing parameters can be performed using any software such as Power Point. PEDOT-PSS suspension can be loaded into an inkjet cartridge and deposited on a given substrate in any designed pattern. The gray-scale color scheme can be employed to control the layer thickness and sheet resistivity of the inkjet printed layers. These layers are then used as anodes in organic light-emitting devices (OLEDs).