Laplace transform analysis of the carbon cycle

A Laplace transform representation is used to describe the changes in atmospheric CO₂ in response to emissions. The formalism gives an explicit representation of generic relations that are less clear when model results are presented as numerical integrations with particular parameter values. In particular, the Laplace transform formalism clarifies some issues involved in inversion of ice-core data and analysis of geosequestration. The airborne fraction is expressed as the emission growth rate multiplied by the Laplace transform of the atmospheric response function, evaluated at the growth rate. This representation emphasises that historical data only capture carbon cycle dynamics over a limited range of time-scales. The Laplace transform formalism provides a basis for expressing uncertainties in the response function in terms of the Padé–Laplace transformation used for fitting sums of exponentials.     

A SVET investigation on the modification of zinc dust reactivity

Weldable primers are thin zinc-rich organic coatings that are weldable due to the electrical conductivity provided by the zinc dust. They are used in the automotive industry to provide corrosion protection in regions of difficult access. The zinc particles are highly susceptible to corrosion attack and, due to the small thickness, the protection conferred by these systems is limited.     

Electrochemical and analytical study of corrosion inhibition on carbon steel in HCl medium by 1,12-bis(1,2,4-triazolyl)dodecane

1,12-bis(1,2,4-triazolyl)dodecane (dTC12) is an excellent corrosion inhibitor for carbon steel in deaerated 1 M HCl solution. In this work electrochemical and analytical techniques were used to study the inhibition of corrosion on carbon steel in acidic medium. The carbon steel corrosion inhibition of dTC12 was attributed to the synergistic effect between chloride anion and quaternary ammonium ion. The protective efficiency of the film was higher than 90%, indicating that corrosion of carbon steel in 1 M HCl is reduced by dTC12.The effect of dissolved oxygen on the inhibition efficiency was also investigated. The results show that the inhibition efficiency increases in early stage and decreases for a long immersion time.     

Oxygen transport in ferrite-based ceramic membranes: Effects of alumina sintering aid

Moderate additions of Al₂O₃ to strontium ferrite-based mixed conductors, such as SrFe_0.7Al_0.3O_3−δ and La_0.2Sr_0.8Fe_0.8Ga_0.2O_3−δ with the composition close to the solid solution formation limits, make it possible to improve ceramics sinterability, to increase oxygen permeability and to decrease thermal expansion. These effects are associated with the segregation of alumina-rich phases, primarily SrAl₂O₄, and the formation of A-site cation-deficient perovskite. The improved properties of the SrFe_0.7Al_0.3O₃-based material were used to fabricate high-quality tubular membranes for methane conversion reactors. Similar enhancement in sinterability is also observed for another promising parent material of mixed-conducting membranes, La_0.5Sr_0.5FeO_3−δ. However, extensive dissolution of Al³⁺ cations in the iron sublattice, creation of A-site vacancies and changing the La:Sr concentration ratio all lead to decreasing ionic transport in La_0.5Sr_0.5FeO_3−δ. As a result, additions of either Al₂O₃ or SrAl₂O₄ have a deteriorating influence on the oxygen permeation fluxes through La_0.5Sr_0.5FeO₃-based ceramics.     

Surface Pretreatments of Silicon Nitride for CVD Diamond Deposition

The efficiency of different surface pretreatments (four standard chemical etchings and four diamond powder abrasive procedures) on silicon nitride (Si₃N₄) substrates for chemical vapor deposition (CVD) of diamond has been systematically investigated. Blank Si₃N₄ samples were polished with colloidal silica (∼0.25 μm). Diamond nucleation and growth runs were conducted in a microwave plasma chemical vapor deposition apparatus for 10 min and 6 h, respectively. Superior results concerning nucleation density ( N _d∼ 10¹⁰ cm⁻² after 10 min), film uniformity, and grain size (below 2 μm after 6 h) were obtained for the mechanically microflawed samples, revealing that chemical etchings (hot and cold strong acids, molten base or CF₄ plasma) are not crucial for good CVD diamond quality on Si₃N₄.     

Development of ceramic floor tile compositions based on quartzite and granite sludges

In the present work, industrial sludges derived from cutting and polishing natural stones (granite and quartzite) were characterised in terms of particles size distribution, chemical and mineralogical composition, and thermal behaviour and their potential to be incorporated as main components in red-clay-based stoneware tiles was evaluated. High levels (60–70 wt.%) of incorporation were attempted aiming at designing new formulations intended to be less expensive and possess better final properties (lower water absorption and higher flexural strength) in comparison to an industrial reference body used in the production of rustic tiles by extrusion, characterised 8–9% water absorption and a flexural strength of 17–18 MPa. Extruded rods of different formulations were produced and fired at 1100 °C, 1125 °C, 1150 °C and 1200 °C. The experimental results showed that all the new formulations performed better with the most significant improvements being obtained with incorporation of granite sludge. Flexural strength values more than triplicate and water absorption decreased by more than one order of magnitude in comparison to the reference paste. The new products fulfil the requirements of the ISO 13006 standard, group BIa (porcelain tiles).     

The Building Blocks of a PaaS

Traditional cloud computing providers enable developers to program and deploy applications in the cloud by using platform as a service (PaaS) providers. Despite the benefits of such an approach, this service model usually comes with a high level of the lock in effect into the service provider. The lock in effect occurs when a software developer needs to change its cloud provider. When this happens, it usually means a major application rewrite, specific for the new PaaS. This paper details the initial results of a project whose goal is to build a PaaS where vendor lock in does not occur. With this PaaS, developers wishing to deploy their applications into the cloud may continue to program using their usual development environments. There are no necessary changes required to make the application PaaS compatible. As a proof of concept, we developed an open source PaaS management application as a regular web application and then deployed it on the cloud.