Distributed Approach to Control and Manage Context-based Multi-virtual Networks

Using the flexibility of Wireless Mesh Networks (WMNs) and network virtualization, we define a novel architecture that provides personalized access for users by splitting a WMN into several adaptable Virtual Networks (VNs). Each VN is configured to meet specific levels of user context demands (context can span from security, mobility or service requirements). Users are grouped according to similarity of their context, and associated to VNs matching their context. To break the traditional centralized solutions for WMN and virtualization control, this paper defines an overall framework to distribute the control responsibilities along the architectural entities, which can then cooperate to autonomously discover, select, create, extend or remove VNs on-demand according to user and WMN dynamics. We also propose an analytical model to evaluate several performance aspects of the distributed VN control when compared to centralized or decentralized solutions, validating the model against a simulation study.     

User interface based on natural interaction design for seniors

With world population ageing, how to help seniors to adapt to technology life is an important issue. Technology is becoming life rather than resistance, because many of the technology applications are often accompanied by a lot of information to process. This makes the user interface to become an important bridge between human computer interactions. Especially the inconvenience caused by human ageing, these related issues from the cognitive and operational of products are derived. This study proposes a study of user interface design based on natural interaction to increase seniors’ usage intention. In the proposed contents, the Kinect sensor is used to retrieve seniors’ in-depth information in movements, thus the user interface of system can be operated by the gesture intuitively. In the framework of the system, in the first all, the morphology is applied to identify the features of a hand from depth values obtained from the sensor. Gesture is used to recognize operating behavior of users to implement the interactive action, and collision detection is applied to confirm effectiveness of operation. On the other hand, through interpretive structural model (ISM), each design element of interactive interface can be decomposed and realized, and the solution for target and direction of design problem is also proposed. At the meanwhile, the concept of affordance is conducted to the development of interface for graphic users that proposed in this study, and the design achievement contains operation and usability of intuition can further be acquired. Finally, based on the proposed methodology, an intuitive user interface of digital devices is constructed by Java programming language that allows for verifying the feasibility of user interface for seniors. Besides, the proposed method can be widely used to develop the user interface for various products.     

Product mix strategy and manufacturing flexibility

The manufacturing industry is facing a turbulent and constantly changing environment, with growing complexity and high levels of customisation. Any investment solution should address these problems for a dynamic market and within limited budget boundaries, so that companies try to remain competitive. The authors propose a real options model to support firms making important investment decisions, specifically decisions associated with the acquisition of new equipment aimed at allowing firms to increase their manufacturing flexibility for the production of both standard and customized products. This paper is partially based on a real operating experience related to visual finishing technology features in an industrial company that conforms to the definitions of the product mix. The authors’ motivation for this work is driven by firms’ desire to satisfy specific customer needs, and to respond to them quickly under uncertain demand. Our goal, using theories from finance, production management, and product offering management, is to conclude that there is a relevant difference between the evaluation of the technology that is to be chosen, and the potential value due to product mix adaptations that are able to provide the maximum return from investment. We address problems related to standard and customized production systems, and the decision to invest in a set of resources that will enable this choice.     

Mitigating adjacent channel interference in vehicular communication systems

In the last few decades, dedicated wireless channels were specifically allocated to enable the development and implementation of vehicular communication systems. The two main protocol stacks, the WAVE standards proposed by the IEEE in the United States and the ETSI ITS-G5 in Europe, reserved 10 MHz wide channels in the 5.9 GHz spectrum band. Despite the exclusive use of these frequencies for vehicular communication purposes, there are still cross channel interference problems that have been widely reported in the literature. In order to mitigate these issues, this paper presents the design of a two-stage FIR low-pass filter, targeting the integration with a digital baseband receiver chain of a custom vehicular communications platform. The filter was tested, evaluated and optimized, with the simulation results proving the effectiveness of the proposed method and the low delay introduced in the overall operation of the receiver chain.     

Effect of warming on protein,glycogen and fatty acid content of native and invasive clams

Human bivalve consumption in Europe has steadily increased in the last years, particularly during summer months when seawater temperature increases. Since ocean warming is among the current global environmental threats affecting aquatic organisms, it is of paramount importance to investigate its effect on the nutritional quality of seafood products. In this context, the aim of this study was to investigate differences in the nutritional quality (in terms of protein, glycogen and fatty acid, FA, content) and condition of a native (grooved carpet shell, Ruditapes decussatus) and an invasive (Japanese carpet shell, Ruditapes philippinarum) clam species, subjected to warming. Our results clearly reveal that temperature significantly affected the nutritional quality of both clam species, particularly the FA composition. Both clam species responded similarly to warming, by significantly decreasing the content of some fatty acids, but not protein and glycogen levels. A predominance of polyunsaturated FA (PUFA) over saturated FA (SFA) and monounsaturated FA (MUFA) was observed throughout the experiment, as well as high n − 3/n − 6 and PUFA/SFA ratios. The native clam always revealed higher values of these fatty acids, indicating that this species has a better nutritional quality in comparison to the invasive one. Nonetheless, the loss of n − 3 PUFA (in native species), eicosapentaenoic (EPA; in both species) and docosahexaenoic (DHA; in invasive species) acids was considered as the major negative outcome derived from warming, since it contributes to the loss of prime quality fatty acids for human health. However, atherogenic, thrombogenic and hypocholesterolemic/hypercholesterolemic indices (AI, TI and h/H, respectively) remained low in both species, even in warming conditions, suggesting that these food items can be used in a cardio-protective and hypocholesterolemic diet. This study provides new insights to understand and foretell the effects of climate change on nutritional quality of marine organisms.     

Hyperbaric storage at and above room temperature of a highly perishable food

Hyperbaric storage at naturally variable room temperature (RT) conditions (18–21 °C) and above (30 °C) was evaluated as a possible new food preservation method, regardless of temperature. Preservation of watermelon juice (used as a case study of a highly perishable food) at RT and 5 °C at atmospheric pressure was compared to preservation under 100 MPa at RT. After 8 h of hyperbaric storage at 100 MPa, the initial microbial loads of the watermelon juice were reduced by 1 log unit for total aerobic mesophiles, and 1–2 log units for Enterobacteriaceae and yeasts and moulds, to levels of about 3 log units for the former and below the detection limit for the latter, and remained thereafter unchanged up to 60 h. Similar results were obtained at 30 °C at 100 MPa after 8 h. At atmospheric pressure at RT (24 h) and 30 °C (8 h), microbial levels were already above quantification limits and unacceptable for consumption. Furthermore, pressure attenuated the increase in titratable acidity verified at atmospheric pressure, but caused higher colour changes, especially a higher lightness and a lower browning degree. Post-hyperbaric storage at 5 °C revealed an extended shelf life, as an additional benefit of hyperbaric storage. These results show that hyperbaric storage is a very promising food preservation methodology.     

A Low-Power Wakeup Radio for Application in WSN-Based Indoor Location Systems

This paper presents a low-power wakeup radio (WUR) for application in indoor location systems. The presented radio has a better performance than the state-of-the-art radios, since it has low-power consumption, only 10 μW and it is perfectly integrated into a wireless sensor network based on ZigBee, which is used for location purposes. This performance was achieved due to an optimised radio frequency design of the WUR, which was embedded with a low-cost/low-power processor, and due to an enhanced control algorithm. Moreover, a software defined radio approach has been used to implement the WUR protocol. The WUR was designed and integrated in an existing WSN-based indoor location system which was originally based on a periodic sleep-wake up duty-cycled protocol. In the WUR protocol the location sensor is kept in deep sleep mode until it receives an external wake-up order. According to estimates, with this scheme, the battery lifetime can be increased from 200 days (using conventional duty-cycle protocol) up to almost 8000 days (sensor waken-up few times per day).     

An accurate method to determine the through-plane electrical conductivity and to study transport properties in film samples

The through-plane conductivity of a film sample is critically important because it largely affects the performance of batteries, capacitors, and thermoelectric devices. In this study, we developed a modified four-probe through-plane electrical conductivity measurement method using a coaxial structure. This method is general and works for free-standing film samples. We studied different samples including a steel sheet, highly oriented pyrolytic graphite, and conducting polymers. We confirmed metallic transportation in the steel sheet and hopping transportation in graphite in the through-plane direction by conducting low temperature measurements at 100 K. In the case of a conducting polymer poly(3,4-ethylenedioxythiophene)/polystyrene sulfonate, the conductivity anisotropic ratio decreases with increasing in-plane conductivity. Temperature dependent measurements show two distinct activation energy regimes in the through-plane direction in PEDOT/PSS but almost no change in the in-plane electrical conductivity activation energy. This could be due to additional carrier paths that occur through the more disordered region (the PSS-rich region) in the through-plane direction. We also examined the Meyer–Neldel rule in PEDOT/PSS and concluded that PEDOT/PSS follows the anti-Meyer–Neldel rule, likely due to the high carrier density in the film.     

On the influence of shape and material used for the femoral component pegs in knee prostheses for reducing the problem of aseptic loosening

The integration of materials selection and design are essential to the success of new product development, especially when applied to biomedical devices. The knee prosthesis, like any other implant, is a product that still lacks satisfactory design solutions for solving the problem of aseptic loosening. Stress shielding is one of the main causes of aseptic loosening that is intimately related to the overall design of the knee prosthesis. The design of the location pegs in the femoral component of the knee prosthesis is seen to have a critical effect on the stress shielding. In this study, therefore, different combinations of location peg geometries and material designs were assessed using finite element analyses in conjunction with a design of experiments procedure. The materials considered were Co–Cr alloy (as reference material) and functionally graded material (FGM) for the main body of the femoral component, and various porous materials for the pegs (as promising new materials). The performance outputs (responses) were stress levels in the femoral bone to assess the stress shielding effect, and stress levels in the pegs to assess adequate peg strength. The result revealed conflicts in satisfying the design objectives. Therefore, a multi-objective optimization was carried out to find the optimal geometries of the pegs for the femoral component. Based on the findings of the optimization process, a set of candidate designs was generated and a multi-criteria decision making approach used to obtain the final ranking of candidate designs. The ranking order demonstrated the superiority of using a FGM femoral component with porous material pegs of conical geometry. By comparing the results with the standard Co–Cr design, it was shown that the new design of pegs can significantly increase the magnitude of stresses seen at the distal femur; hence reduce the stress shielding effect, without over compromising on the strength of the pegs.     

Photoluminescence study of GaAs thin films and nanowires grown on Si(111)

Mg-doped GaAs nanowires have been grown by molecular beam epitaxy on a partially Au-coated Si(111) substrate by the vapor–liquid–solid mechanism. Outside the coated areas, a thin film of GaAs was grown epitaxially at the same time. The optical properties in both parts of the sample were investigated by photoluminescence spectroscopy, as a function of temperature. A structured emission in the range ～1.25–1.55 eV was observed at 10 K and the resemblances in both cases were identified. The radiative transitions are discussed with relevance to known defect centers in the GaAs thin films and to their possible relation with the zinc-blende and wurtzite phases in the nanowires. The presence of both crystalline phases in the nanowires was confirmed by μ-Raman spectroscopy.