Hopen机顶盒软件平台设计与实现*

针对IBM STBX25XX机顶盒的硬件结构特点,设计了Hopen机顶盒软件平台.通过对Hopen嵌入式实时操作系统内核的移植、各功能部件驱动的定制和开发,使得Hopen机顶盒软件平台可以运行在PowerPC架构的硬件上,完成了数字电视节目的播放功能,从而拓宽了Hopen的应用领域.     

基于Web services的WebGISVisA体系结构研究与实现*

针对目前网络地理信息系统体系结构难以实现Internet环境下的异构空间信息的互操作问题,深入分析其主要原因,在对现有网络地理信息系统的三层体系结构进行深入分析的基础上,提出一种基于Web services的网络地理信息系统体系结构(Web-based geographical information services visualization architecture,WebGISVisA).WebGISVisA体系结构通过Web services对各个地理信息系统组件进行包装,实现各个组件的跨平台操作,从技术上使得客户端和服务端达到了负载平衡,完成了WebGIS三维的虚拟现实,实现了在Internet下空间数据互操作和跨平台的功能,最大限度地达到数据共享.     

Laser particles with omnidirectional emission for cell tracking

The ability to track individual cells in space over time is crucial to analyzing heterogeneous cell populations.Recently,microlaser particles have emerged as unique optical probes for massively multiplexed single-cell tagging.However,the microlaser far-field emission is inherently direction-dependent,which causes strong intensity fluctuations when the orientation of the particle varies randomly inside cells.Here,we demonstrate a general solution based on the incorporation of nanoscale light scatterers into microlasers.Two schemes are developed by introducing either boundary defects or a scattering layer into microdisk lasers.The resulting laser output is omnidirectional,with the minimum-to-maximum ratio of the angle-dependent intensity improving from 0.007(-24 dB)to>0.23(-6dB).After transfer into live cells in vitro,the omnidirectional laser particles within moving cells could be tracked continuously with high signal-to-noise ratios for 2 h,while conventional microlasers exhibited frequent signal loss causing tracking failure.     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...     

NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

(FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106 J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25m3, showing the promising of being the recording medium for future high density perpendicular recording.     

A STUDY OF THE SURFACE TREATED WITH SULF BT BY XPS

本文的XPS(X射线光电子能谱)结果揭示了,渗硫层中的主要成分并非为人们通常认为的仅是FeS(?)一种,而是FeS和FeSO_3两种,并且二者的相对含量基本相等。     

Insights into the intrinsic interaction between series of C1 molecules and surface of NiO oxygen carriers involved in chemical looping processes

Understanding and modulating the interaction between various reactive molecules and oxygen carriers are the key issue to achieve process intensification of chemical looping technology. C1 chemical molecules play an important role in many reactions involved with chemical looping processes. However, up to now, there is still a lack of systematic and in-depth understanding of the adsorption mechanism of C1 molecules on the surface of oxygen carriers (OCs). In this work, the intrinsic interaction between a series of C1 molecules composed of CH₄, CO, CO₂, CH₃OH, HCHO and HCOOH and surface of NiO OCs in the chemical looping process have been studied using density functional theory calculations. Various adsorption configurations of C1 molecules and also different adsorption sites of NiO have been considered. The structural features of stable configuration of C1 molecules on the surface of NiO OCs have been obtained. Further, the interacted sites, types and strengths of C1 molecules on the surface of NiO have been directly pictured by the independent gradient model methods. Also, the nature of the interaction between C1 molecule and NiO surface has been investigated with the aid of energy decomposition analysis from a quantitative view.     

Static output feedback control via PDE boundary and ODE measurements in linear cascaded ODE–beam systems

This paper addresses the problem of feedback control design for a class of linear cascaded ordinary differential equation (ODE)–partial differential equation (PDE) systems via a boundary interconnection, where the ODE system is linear time-invariant and the PDE system is described by an Euler–Bernoulli beam (EBB) equation with variable coefficients. The objective of this paper is to design a static output feedback (SOF) controller via EBB boundary and ODE measurements such that the resulting closed-loop cascaded system is exponentially stable. The Lyapunov’s direct method is employed to derive the stabilization condition for the cascaded ODE–beam system, which is provided in terms of a set of bilinear matrix inequalities (BMIs). Furthermore, in order to compute the gain matrices of SOF controllers, a two-step procedure is presented to solve the BMI feasibility problem via the existing linear matrix inequality (LMI) optimization techniques. Finally, the numerical simulation is given to illustrate the effectiveness of the proposed design method.     

Software rejuvenation in cluster computing systems with dependency between nodes

Software rejuvenation is a preventive and proactive fault management technique that is particularly useful for counteracting the phenomenon of software aging, aimed at cleaning up the system internal state to prevent the occurrence of future failure. The increasing interest in combing software rejuvenation with cluster systems has given rise to a prolific research activity in recent years. However, so far there have been few reports on the dependency between nodes in cluster systems when software rejuvenation is applied. This paper investigates the software rejuvenation policy for cluster computing systems with dependency between nodes, and reconstructs an stochastic reward net model of the software rejuvenation in such cluster systems. Simulation experiments and results reveal that the software rejuvenation strategy can decrease the failure rate and increase the availability of the cluster system. It also shows that the dependency between nodes affects software rejuvenation policy. Based on the theoretic analysis of the software rejuvenation model, a prototype is implemented on the Smart Platform cluster computing system. Performance measurement is carried out on this prototype, and experimental results reveal that software rejuvenation can effectively prevent systems from entering into disabled states, and thereby improving the ability of software fault-tolerance and the availability of cluster computing systems.     

Global software testing under deadline pressure: Vendor-side experiences

ContextIn the era of globally-distributed software engineering, the practice of global software testing (GST) has witnessed increasing adoption. Although there have been ethnographic studies of the development aspects of global software engineering, there have been fewer studies of GST, which, to succeed, can require dealing with unique challenges.ObjectiveTo address this limitation of existing studies, we conducted, and in this paper, report the findings of, a study of a vendor organization involved in one kind of GST practice: outsourced, offshored software testing.MethodWe conducted an ethnographically-informed study of three vendor-side testing teams over a period of 2 months. We used methods, such as interviews and participant observations, to collect the data and the thematic-analysis approach to analyze the data.FindingsOur findings describe how the participant test engineers perceive software testing and deadline pressures, the challenges that they encounter, and the strategies that they use for coping with the challenges. The findings reveal several interesting insights. First, motivation and appreciation play an important role for our participants in ensuring that high-quality testing is performed. Second, intermediate onshore teams increase the degree of pressure experienced by the participant test engineers. Third, vendor team participants perceive productivity differently from their client teams, which results in unproductive-productivity experiences. Lastly, participants encounter quality-dilemma situations for various reasons.ConclusionThe study findings suggest the need for (1) appreciating test engineers’ efforts, (2) investigating the team structure’s influence on pressure and the GST practice, (3) understanding culture’s influence on other aspects of GST, and (4) identifying and addressing quality-dilemma situations.