CF/ABS树脂复合材料制备工艺对导电性能的影响及对屏蔽性能的理论预测

本文研究了使用溶剂法、密炼机和开炼机混炼碳纤维填充ABS树脂复合材料的导电性能,得到了纤维填充量与复合材料电阻率的关系,对其导电机理进行了分析.通过比较,发现纤维长径比是决定复合材料导电性能的重要因素,其它如纤维在基体中的分布也对复合材料导电性能有影响.最后对复合材料的屏蔽性能进行了理论计算.     

基于显微视觉的宏/微双重驱动微动台的自动标定

提出了基于压电技术的微操作系统的自动标定方法,采用混合式步进电机直接驱动的宏动平台,实现系统大行程宏动定位,安装在宏动平台上的压电陶瓷驱动的微动平台和精密光栅,实现亚微米级的分辨率和定位精度,通过以上两部分实现定位机构的全闭环反馈控制,采用显微视觉反馈获取微动台操作器在图像中的位置信息进行标定。实验结果表明:系统的动态和稳定性能良好,自动标定运算速度快,运行速度达到11 frame/s,实现了对系统的精确标定,标定精度达到0.1μm。     

Modelling of heat transfer in an infiltrated granular bed in view of the difference of phase temperatures

Physically substantiated boundary conditions for problems of heat transfer in infiltrated granular beds based on the two-temperature model which allow for the absence of interphase heat transfer on boundaries are formulated. It is shown that classical Dankwerts conditions would be applicable for gas. The problem of porous cooling at the boundary conditions of the 2nd and 3rd kind on the outer boundary is solved in a new formulation.     

Preparation and characterization of cuprous iodide nanoparticles

A new technique for the preparation of CuI nanoparticles from CuSO₄ and KI ethanol solutions has been developed. Preparation conditions were optimized through a series of experiments. Under these conditions, the yield of CuI reached 95.39%. The product was characterized and the reaction kinetics was studied. The results show that the product takes a roughly spherical shape with an average particle size of less then 50 nm. The activation energy of the formation of CuI is found to be E _a = 0.58 × 10² kJ/mol, and the preexponential factor in the Arrhenius equation is k ₀ = 7.43 × 10¹⁶ mol/(l s). The text was submitted by the authors in English.     

差分式连续时间电流型CMOS跨导—电容低通滤波器

应用信号流图法对电流系统传递函数直接模拟，提出了一种新颖的差分式连续时间电流模式ＣＭＯＳ跨导－电容低通滤波器的实现方案。由于采用了差分式结构和电流负反馈，整个电路方案具有差分式结构和电流型电路的优点；并且仅使用最少数量的ＯＴＡ和电容，与数字ＣＭＯＳ工艺兼容，适于全集成。面向实际电路完成了ＭＯＳ管级的计算机仿真，结果表明，所提出的电路方案正确有效     

Cooperative Effect Radiation Loss of Optical Pump Solid Laser

1 Introduction For increasing the output energy of laser, the pumping power must be enhanced. But the cooperative effect will arise and cause spontaneous radiation light in laser medium sample when the pumping power is high e- nough without the resonator. The spontaneous radiation light is coherent light between laser and fluorescent. It will compete the upper energy level population with ex- cited radiation, and the loss increase. In solid laser medium, such as Nd∶YAG, the Nd ion densityi…     

利用Hilbert-Huang变换提取地震信号瞬时参数

 通过Hilbert变换求取的信号瞬时参数并非对任何信号都有物理意义，此法通常要求被分析信号是窄带或平稳的，而且对噪声很敏感。而实际地震信号既非平稳又含有噪声，若在实际应用中不加考虑地对地震信号进行Hilbert变换以求取瞬时参数，这种情况下求取的瞬时参数将缺乏物理意义甚至失真。Hilbert-Huang变换是一种新的分析非平稳非线性信号的方法，它先将信号进行经验模态分解（EMD），形成有限个固有模态函数（IMF）之和，再对固有模态函数作Hilbert变换求取时频谱，求取的时频谱在时域和频域都具有较高的分辨率。本文将Hilbert-Huang变换应用于地震瞬时参数的提取，实例表明，对地震剖面做EMD可以得到不同时间尺度上的特征，Hilbert谱比传统的时频谱在时间和频率域上的分辨率都要高，强反射层在第1阶IMF瞬时频率剖面上比原瞬时频率剖面上表现得更为明显。     

Robustness analysis of responses of vibration control structures with uncertain parameters using interval algorithm

Variations in system parameters due to uncertainties may result in system performance deterioration. Uncertainties in modeling of structures are often considered to ensure that control system is robust with respect to response errors. Hence, the uncertain concept plays an important role in vibration control of the engineering structures. The paper discusses the robustness of responses of vibration control systems with the uncertain parameters. The vibration control problem of an uncertain system is approximated by a deterministic one. The uncertain parameters are described by interval variables. The uncertain state matrix is constructed directly using system physical parameters and avoided to use bounds in Euclidean norm. The feedback gain matrix is determined based on the deterministic systems, and then it is applied to the actual uncertain systems. A method to calculate the upper and lower bounds of responses of the closed-loop system with uncertain parameters is presented. The upper bounds of responses can be used to estimate the robustness of responses of the controlled system with uncertain parameters. Two numerical examples are given to illustrate the applications of the present approach.     

潜孔锤冲击作用下土体变形的有限元分析

潜孔锤冲击挤密钻进过程中周围土体的变形机理是一个高度非线性问题。针对潜孔锤在土中的面-面接触问题,运用Drucker-Prager屈服准则为判据,将土体视为DP材料,通过钻具与土之间的接触及施加冲击载荷来模拟钻进过程,从而建立了潜孔锤在土中冲击挤密钻进的有限元模型。利用非线性瞬态动力学有限元分析手段,对钻进过程中冲击力对土的作用加以研究,分析了钻具周围土体的应力、应变以及钻具与土体的摩擦情况。结果表明,在冲击载荷作用下,锥形钻头前端土体应力集中,并形成应力泡,冲击功主要用于竖向压缩土体,而水平方向的挤压作用相对较小,摩擦应力在钻头锥面附近出现峰值,是影响钻进速度的主要原因之一。