Reductive acid leaching of manganese dioxide with glucose: Identification of oxidation derivatives of glucose

The oxidation of glucose during the reductive leaching of pure MnO₂ and manganese ore in sulphuric acid at 90 °C MnO₂ was investigated. The aim was to identify the derivatives and the chemical pathway of glucose oxidation. Organic derivatives were monitored by HPLC using an Aminex HPX-78H column and UV detection. Chromatographic patterns of leaching solutions showed that major compound formed was formic acid. Minor quantities of glycolic, glyceric and traces of gluconic acids were identified. Results suggest that during the leaching reaction, the carbon chain of glucose is shortened by detachment of one carbon atom as formic acid.     

Characterization of Ni nanowires after annealing

The effect of Ni nanowires, fabricated by electrodeposition in self-ordered AAO templates, was studied. NiO and Ni₂O₃ nanofibers were fabricated by simple heat-treatment in air and in an atmosphere of pure O₂. Ni nanowires after vacuum annealing exhibit pronounced preferential orientation of Ni (111) at 600 °C. Grain growth resulted in size effects and induced the transformation of NiO to Ni₂O₃ during annealing in air. Ni was oxidized to Ni₂O₃ (∼ 500 °C) in an atmosphere of pure O₂. The stable Ni-oxides Ni₂O₃ are formed during annealing at a higher temperature (∼ 900 °C) in air and in an atmosphere of pure O₂.     

Bonelike apatite formation on carbon microspheres

Carbon microspheres with a diameter of 2 μm were prepared by hydrothermal process. The apatite-formation ability of the carbon microspheres was evaluated by soaking them in a simulated body fluid (SBF) for 5 and 10 d and apatite-formation mechanism was also analyzed. The result showed that bonelike apatite was formed on the surface of carbon microspheres. Our study indicates that the carbon microspheres synthesized by this method possess apatite-formation ability and may be used as a bioactive injectable filler for bone tissue regeneration.     

Charge transport and luminescent properties of PMMA-dehydrate nanotubed titanic acid nanocomposites

In this paper, we doped p-type conductivity dehydrated nanotubed titanic acid (DNTA) into insulator polymer poly(methyl methacrylate) (PMMA). The electric properties of this nanocomposite were investigated. The photoluminescence efficiency of fluorescent dye 4-(dicyanomethylene)-2-t-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) in PMMA matrix was enhanced by doping with DNTA. Moreover, screen effect by DNTA with high permittivity caused the emission from DCJTB to be blue-shifted.     

Transformation of carbon nanotubes to diamond in microwave hydrogen plasma

Multiwall carbon nanotubes (MWCNTs), synthesized by microwave plasma enhanced chemical vapor deposition, were used as the precursor to synthesize diamond in a pure hydrogen microwave discharge. Diamond-scratched silicon wafers, with and without precoated MWCNTs, were placed side by side on a substrate holder. Diamond was formed on both wafers with the consumption of MWCNTs. The present results suggest that the solid–gas–solid transformation mechanism is involved in this process.     

Fouling study of silicon oxide pores exposed to tap water

We report on the fouling of Focused Ion Beam (FIB)-fabricated silicon oxide nanopores after exposure to tap water for two weeks. Pore clogging was monitored by Scanning Electron Microscopy (SEM) on both bare silicon oxide and chemically functionalized nanopores. While fouling occurred on hydrophilic silicon oxide pore walls, the hydrophobic nature of alkane chains prevented clogging on the chemically functionalized pore walls. These results have implications for nanopore sensing platform design.     

Revealing Microstructural,Textural, and Hardness Evolution of Ti–6Al–4V Sheet Cooled From Sub β-Transus Temperature at Different Rates

Metallurgical and Materials Transactions A - A hot-rolled Ti–6Al–4V sheet was annealed at 960 °C (sub β-transus temperature) and then subjected to different coolings [in water...     

Experimental investigations and thermodynamic modelling of KCl–LiCl–UCl3 system

Experimental investigations and Gibbs energy modelling of KCl–LiCl–UCl₃ system employing CALPHAD method are reported. Gibbs energy modelling of the subsystems KCl–UCl₃ and LiCl–UCl₃ was carried out primarily using phase diagram data from the literature. For the Gibbs energy modelling of the KCl–LiCl subsystem, new phase boundary data corresponding to four terminal compositions $(x_{\mathrm{LiCl}}=0.03$, 0.05, 0.95 and 0.97) obtained through differential thermal analysis data along with thermochemical and phase diagram data from the literature were used. Thermal analysis was also carried out for KCl–LiCl eutectic mixture containing small amounts of UCl₃ $(x_{{\mathrm{UCl}}_3}=9.03\times {10}^{-3}$ and $1.79\times {10}^{-2}$). The liquidus temperatures for these compositions were found to be 637 K and 674 K. Electromotive force data for dilute solutions of UCl₃ in the KCl–LiCl eutectic melt, measured in the temperature range 708–833 K in the present work, were found to be in good agreement with the literature data. These data were also used as input for the Gibbs energy modelling of the KCl–LiCl–UCl₃ system. In order to improve the quality of the resulting Gibbs energy functions of the quasibinaries and the quasiternary, enthalpies of mixing of the corresponding melts estimated using an empirical correlation based on surrounded-ion model were also used as input. Finally, the generated Gibbs energy functions were used to compute phase equilibria.     

Enhanced Photocatalytic Hydrogen Evolution Over CaTi1−x Zr x O3 Composites Synthesized by Polymerized Complex Method

The solid solution of CaTi_1−x Zr _x O₃ (x = 0–0.15) was successfully synthesized by the polymerized complex (PC) method. This study has exhibited the advantage of the PC method to prepare a highly active CaTiO₃ compared with the conventional solid-state reaction (SSR) method. More importantly, further improvement in phase purity and large surface area was achieved by the doping of Zr⁴⁺, leading to remarkable enhancement of photocatalytic activities compared to pure CaTiO₃. The quantum yield for H₂ evolution over the most active photocatalyst, Pt (1.0 wt%)/CaTi_0.93Zr_0.07O₃, was 1.91% and 13.3% in photoreactions from pure water and aqueous ethanol solution, respectively for 0.1 g photocatalyst, which was about 3.3 and 2.5 times compared to that of PC-derived CaTiO₃.     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007