Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.     

氯甲烷在镁修饰的ZSM-5分子筛催化剂上催化转化研究

在镁修饰的ZSM-5分子筛催化剂上,氯甲烷可以被催化转化为烃类产品。分别采用了离子交换和浸渍的方法来修饰ZSM-5分子筛。离子交换的Mg-ZSM-5催化剂和浸渍的Mg/ZSM-5催化剂都可以提高反应产物中的低碳烯烃的选择性,降低烷烃的选择性,并且保持较高的反应活性,但高的浸渍量对反应活性有一定的影响。NH3-TPD的结果表明,浸渍镁的ZSM-5催化剂的强酸中心数目明显减少。镁的修饰对催化剂酸性的影响导致了产物中低碳烯烃的增加。浸渍Mg的ZSM-5催化剂是潜在氯甲烷转化生成低碳烯烃的催化剂。     

Synthesis and Interfacial Tension Behavior of Heavy Alkyl Benzene Sulfonates

Heavy alkyl benzene sulfonates (HABS) were synthesized, and their interfacial tensions were measured and compared with those of petroleum sulfonates ORS-41. Effects of their coupling with lignosulfonate were also studied. The results showed that HABS exhibited good interfacial activities and the system of HABS blending with LS displayed better interfacial activities than ORS-41 and therefore reduced the prime cost. Their best proportions of synergism were from 3:1 to 4:1. HABS might be a more promising alkali-surfactant-polymer (ASP) flooding agent.     

Na+、K+离子交换对Co-Mo/MCM-41加氢脱硫催化剂的影响

 用偏硅酸钠和正硅酸乙酯作硅源制备了MCM-41（分别记作MCM-41(S)和MCM-41(T)）分子筛，并用Na₂C₂O₄和K₂C₂O₄对MCM-41(S)进行了碱金属离子交换改性。以质量分数0.8 %的二苯并噻吩（DBT）的十氢萘溶液为模型化合物，考察了不同MCM-41担载的Co-Mo硫化物催化剂对DBT的加氢脱硫反应性能。结果表明，MCM-41担载的Co-Mo催化剂加氢活性较低，DBT主要通过直接脱硫反应路径脱硫。其活性顺序为：Co-Mo/MCM-41(T)>Co-Mo/MCM-41(S)>Co-Mo/MCM-41(K)>Co-Mo/MCM-41(Na)。UV-Vis结果表明，部分Co与MCM-41(S)中少量Al发生相互作用，生成了CoAl₂O₄，是造成Co-Mo/MCM-41(S)活性降低的重要因素。而在Co-Mo/MCM-41(K)和Co-Mo/MCM-41(Na)中，除CoAl₂O₄物种之外，碱金属的引入还促进了Co₃O₄物种的形成，使其活性进一步降低。     

Investigation of performance variations due to the amplitude of group-delay ripple in chirped fiber Bragg gratings

We measure the system impacts due to the amplitude of group-delay (GD) ripple in single and cascaded chirped fiber Bragg gratings (CFBGs). Signals with smaller pulse width result in smaller performance variation at the same data rate. A 65-ps peak-to-peak GD ripple induces 0.9, 1.7, and 2.7 dB maximum penalties for 10, 20, and 40-Gb/s, respectively. We also find that cascading gratings with random ripple causes much less degradation than cascading gratings with the same ripple profile.     

OFDM系统中同步算法的FPGA 实现

给出了一种用于 OFDM 系统中可同时完成帧起始位置估计和载波频偏估计／补偿的同步算法及其 FPGA 实现方法。采用量化的方法对该不需要额外同步序列的估计算法进行了改进,提高了载波频偏的估计精度,并在数字域进行了频偏校正。在硬件实现上,利用 CORDIC 算法能够有效计算三角函数的特点,把频偏估计和频偏校正过程中的反正切运算和角度旋转操作转化成加法和移位操作,实现了计算精度、运算速度和硬件资源利用三方面性能的兼顾。     

基于流媒体的网络视频监控系统研究与实现

介绍了流媒体网络视频监控系统的原理、设计方案和具体实现,给出了用流媒体进行视频数据的采集、显示、传输和控制的方案和实现方法,充分利用了流媒体网络传输特性和Windows多线程机制,详细介绍了如何把DirectShow和WinSock技术相结合,综合使用TCP和UDP多播通信方式,用双缓冲队列进行数据的控制,采用VC 实现了流媒体网络视频监控系统。     

Fatigue crack growth in SiC particulates reinforced Al matrix graded composite

The SiC/Al graded composite was fabricated by powder metallurgy processing and its fatigue crack growth behavior was studied. The volume percentage of SiC particulates was distributed from 5 to 30% layer by layer on the cross section. Since the aluminium was dissolved together, there was no evident interface between the two layers with different volume fraction of SiC particulates. Fatigue crack growth was in direction of from 5 to 30% SiC layers under sinusoidal wave-form. The retardation of fatigue crack growth was found when crack propagated from low volume fraction of SiC to high volume fraction of SiC. The crack deflection and branching between two layers were observed, which decreased crack growth rates. In view of crack tip driving force, the plasticity mismatch between the layers shielded crack tip driving force, i.e. decreased the effective J-integral at the tip of the crack as the plastic zone of the crack tip spread from the weaker material into the stronger material.     

费萨姆工艺无水氨精馏塔的模拟计算

本文以ＮＨ３－Ｈ２Ｏ系统Ｇｉｂｂｓ自由能、熵、焓和汽液相平衡的热力学模型为基础，用松弛法进行了无水氨精馏塔的模拟计算。改变无水氨采出比、回流比（直汽量）和进料板位置均影响蒸馏效果。     

兼使水流转向的非对称窄缝挑坎

讨论了兼有水流转向功能的一级非对称直线边壁窄缝的设计方法与水力特性，两边墙转向角之差即为水流转向角，两边墙转角相等时出口水流的水深和佛汝德数也分别相等。按在窄缝出口前形成完整幅射流的条件，讨论了兼有转向功能的非对称曲线边墙窄缝的设计方法与水力特性。比较了六种体型(三种对称、三种非对称)窄缝在八种工况对泄槽底板的冲击压强，实测结果表明，非对称性越强冲击压强越小。