Enhancing cation exchange capacity of chars through ozonation

The use of ozone to increase the cation exchange capacity (CEC) of two chars produced from pyrolysis of Douglas fir (Pseudotsuga menziessii) and a control bituminous coal activated carbon (AC) is reported. Chars were produced from the wood fraction of Douglas fir (DFWC) and the bark (DFBC) at 500 °C using an auger driven reactor with a nitrogen sweep gas under mild vacuum. Five ozone treatment times, ranging from 5 min to 60 min, were investigated. The initial properties of each char were found to differ significantly from the other samples in terms of surface area, proximate composition, and elemental composition. DFWC did not show significant mass loss or temperature variation during ozone treatment; however, after 1 h of oxidation both DFBC and AC samples resulted in 20% and 30% mass loss, respectively, and reactor temperatures in excess of 60 °C. Analysis of the pore size distribution of each treatment shows that ozone treatment did not significantly affect small micropores after 30 min of treatment for any material, but did reduce the apparent surface area of mesopores. Increases in carboxylic groups were identified with ozone treatment and found to correlate strongly with changes in measured CEC. The formation of lactone was found to correlate positively with reactor temperature during oxidation. These results indicate that the properties of chars, including surface area, pore structure, and chemical composition, as well as reactor conditions strongly affect the ozone oxidation of chars.     

Potential for rice straw ethanol production in the Mekong Delta,Vietnam

This study is to evaluate the potential for development of a cellulosic ethanol facility in Vietnam. Rice straw is abundant in Vietnam and highly concentrated in the Mekong Delta, where about 26 Mt year⁻¹ of rice straw has been yearly produced. To minimize the overall production cost (PC) of ethanol from rice straw, it is crucial to choose the optimal facility size. The delivered cost of rice straw varied from 20.5 to 65.4 $ dry t⁻¹ depending on transportation distance. The Mekong Delta has much lower rice straw prices compared with other regions in Vietnam because of high density and quantity of rice straw supply. Thus, this region has been considered as the most suitable location for deploying ethanol production in Vietnam. The optimal plant size of ethanol production in the region was estimated up to 200 ML year⁻¹. The improvement in solid concentration of material in the hydrothermal pre-treatment step and using residues for power generation could substantially reduce the PC in Vietnam, where energy costs account for the second largest contribution to the PC, following only enzyme costs. The potential for building larger ethanol plants with low rice straw costs can reduce ethanol production costs in Vietnam. The current estimated production cost for an optimal plant size of 200 ML year⁻¹ was 1.19 $ L⁻¹. For the future scenario, considering improvements in pre-treatment, enzyme hydrolysis steps, specific enzyme activity, and applying residues for energy generation, the ethanol production cost could reduce to 0.45 $ L⁻¹ for a plant size of 200 ML year⁻¹ in Vietnam. These data indicated that the cost-competitiveness of ethanol production could be realized in Vietnam with future improvements in production technologies.     

The roles of conceptual modelling in improving construction simulation studies: A comprehensive review

The conceptual modelling phase of simulation studies has proven to be effective in enhancing the impact of simulation modelling in different domains. However, this simulation phase did not receive much attention in the construction simulation domain. The objective of this paper is to identify the roles that conceptual modelling can play in advancing the engagement, accuracy, and adoption (among other things) of discrete-event simulation studies in construction. In this paper, a Systematic Literature Review (SLR) is conducted, which involves a comprehensive search of databases and researchers’ profiles to identify journal papers, conference articles, books, and theses that have reported the benefits of conceptual modelling for discrete-event simulation studies. The review resulted in 82 documents that were published from 2000 to 2020. Results indicate that the benefits of conceptual modelling include facilitating communications between stakeholders, capturing sufficient information for the simulation model, improving the quality of simulation models, guiding other simulation modelling activities, and facilitating verification and validation of simulation models. By linking these benefits to the current research agenda in construction simulation, this paper shows the significance and potential of the conceptual modelling phase to enhance the impact of discrete-event simulation studies in construction.     

Invader amphipods Gmelinoides fasciatus (Stebbing, 1899) inhabiting distant waterbodies demonstrate differences in tolerance and energy metabolism under elevated temperatures

Gmelinoides fasciatus is a successful invasive amphipod (Amphipoda, Crustacea) that dispersed from Lake Baikal to various waterbodies. Here we studied whether Baikal conditions are optimal for G. fasciatus in terms of thermotolerance and investigated lethal temperatures, 70 kDa heat shock protein level, energy metabolism, and antioxidant defense of animals from three geographically distant waterbodies under changing temperatures. We used acute heat exposure to 28 °C to assess the median lethal times and gradual temperature increase from 6 °C to determine the lethal temperatures. Mortality under heat shock was explainable by the baseline content of Hsp70 that correlated with thermal history. But it was not the case under gradual temperature increase where Hsp70 levels became similar and the mortality pattern changed. The most thermotolerant amphipods from the Gulf of Finland demonstrated a higher amount of free glucose during the temperature increase that may be related to the higher salinity of this waterbody and less energy required for ion regulation. Even though concentrations of major physiological ions in Lake Baikal are lower than in Lake Ladoga, G. fasciatus from Ladoga was slightly more sensitive to the gradual temperature increase. This difference could be explained by the influence of high levels of humic and other potentially toxic substances in Lake Ladoga indicated by increased activities of catalase and glutathione S-transferase. Importantly, all G. fasciatus populations accumulated relatively low levels of lactate during the temperature increase, which may reflect the ability of this invasive species to effectively maintain aerobic metabolism under various conditions.     

Improving the nutritional performance of gluten-free pasta with potato peel autohydrolysis extract

The potato processing industry produces peels, a good source of fibres, minerals and antioxidants, which could be recovered and used in the production of added-value products, such as gluten-free (GF) foods especially designed for the celiac population.This work is focused on the application of the bioactive fraction extracted from potato peels into GF pasta. Subcritical water extraction (autohydrolysis, AH) was performed on potato peel, and the obtained AH liquid extract was characterized in terms of total phenolic content and antioxidant activity. The selected AH temperature (220 °C at 2.2 MPa) was applied to peels from Kennebec, Neiker and Agria potato varieties, and the Agria extract was selected for application in GF pasta, as this was the one with higher antioxidant activity.The impact of Agria potato peel autohydrolysis extract on the nutritional composition and cooking quality of pasta was assessed. Results confirmed that the GF pasta enriched with potato peel extract presented suitable technological properties, coupled with attractive colour and with increased total phenolic content and antioxidant activity, which can contribute to improve the offer of GF products in the market.     

Can child-pedestrians’ hazard perception skills be enhanced?

ObjectiveTraffic collisions yield a substantial rate of morbidity and injury among child-pedestrians. We explored the formation of an innovative hazard perception training intervention – Child-pedestrians Anticipate and Act Hazard Perception Training (CA²HPT). Training was based upon enhancing participants’ ability to anticipate potential hazards by exposing them to an array of traffic scenes viewed from different angles.MethodTwenty-four 7–9-year-olds have participated. Trainees underwent a 40-min intervention of observing typical residential traffic scenarios in a simulated dome projection environment while engaging in a hazard detection task. Trainees were encouraged to note differences between the scenarios presented to them from separate angles (a pedestrian's point-of-view and a higher perspective angle). Next, trainees and control group members were required to perform crossing decision tasks.ResultsTrainees were found to be more aware of potential hazards related to restricted field of view relative to control.ConclusionsChild pedestrians are responsive to training and actively detecting materialized hazards may enrich child-pedestrians’ ability to cross roads.     

Selective oxidation of glycerol over nitrogen-doped carbon nanotubes supported platinum catalyst in base-free solution

In this communication, N-doped multiwall carbon nanotube (N-MWCNT) supported Pt NPs (1.8 nm) were prepared via a facile routine under microwave irradiation and tested in the selective oxidation of glycerol in an aqueous base-free solution. Characterizations confirmed that N-MWCNTs could improve the dispersion of Pt through strengthened metal-support interactions and donate its electron to metallic Pt. This electron-enriched Pt NPs on the surface of N-MWCNTs is active and stable for the selective oxidation of glycerol.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Disappearance and recovery of colossal permittivity in (Nb+Mn) co-doped TiO2

We investigate the effects of doping and annealing on the dielectric properties of metal ions doped TiO₂ ceramics. Colossal permittivity (CP) above 10⁴ was observed in single Nb ion doped TiO₂, which was dominated by electron transport related interfacial polarization. Moreover, the CP can be dropped to 120 when simultaneously introducing Mn ion into the sample. The disappearance of CP behaviors maybe due to the multivalence of Mn which would inhibit the reduction of Ti⁴⁺ to Ti³⁺, and thus reduce delocalized electrons. Interestingly, the CP was recovered for the (Nb+Mn) co-doped TiO₂ after post-sintering heat treatment in N₂ atmosphere. The recovery of CP in the sample after annealing can be ascribed to the semiconducting grain and the insulating grain boundary, according to impedance spectroscopy. We therefore believe that this work can help us understand the mechanism of CP from a new perspective.