Mechanical properties of alternating high-low sp3 content thick non-hydrogenated diamond-like amorphous carbon films

Thick non-hydrogenated DLC films (∼ 1μm), consisting of alternating sub-layers of high/low sp³ content, were deposited onto n++ Si substrates using the filtered cathodic vacuum arc method. These films were systematically studied to determine how the changes in composition of the sub-layers would affect the mechanical properties such as intrinsic stress, hardness, friction coefficient, wear rate and surface roughness. Variations of both the ratio of hard to soft layers (from 1:3 to 3:1) and thickness of individual layers (from 12.5nm to 75nm) were studied in detail. The stress of the film was sufficiently lowered (7.8GPa–2.4GPa) by the multilayer approach. The results indicated that although hardness has some correlations with the internal composition of the film, the reduced Young's modulus is largely not affected. Wear and frictional characterizations also showed that the multilayer was a good candidate for many mechanical applications.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

Modeling and simulation of drug delivery from a new type of biodegradable polymer micro-device

In this paper, modeling and simulation of a new type of controlled drug delivery micro-device based on biodegradable polymers is reported. The micro-device consists of micro-chambers arrays for drug storage to achieve linear release. The micro-chambers are fabricated with polyanhydrides (CPP-SA) using the UV-LIGA technology and the controlled release process are the combined results of the design of the micro-chambers and the biodegradable characteristics of the polymer. This type of drug delivery system has some unique advantages in controlled long-term drug delivery, such as larger loading volume than the matrices release systems, easier control for the release rate, etc. It is necessary to optimize the structure for the long-term and zero-order drug release. Based on the Monte Carlo erosion model, the drug release model is founded for the drug delivery system and using the new model, the drug release profiles from the delivery systems with different structures are simulated. The simulated results indicate that the effect of the drug delivery is dependent on the micro-structure of the delivery system and the simulated drug profiles of coaxial rings micro-cavity shape equal to zero-order released model approximatively. The simulated results are very important to the application research of the new biodegradable polymer micro-device.     

The evolution of Cu-rich domains in the Cu60Zr30Ti10 metallic glass by ASAXS

The structure of the melt-spun Cu₆₀Zr₃₀Ti₁₀ metallic glass is investigated by anomalous small angle X-ray scattering (ASAXS). It is confirmed that the compositional segregation in the diameter range of 30–50 nm exists in the as-quenched state. ASAXS results have convincingly shown the aggregation of Cu atoms and the formation of Cu-rich domains in the amorphous matrix. The Cu-rich domains grow slightly with low growth rate below the glass transition temperature, while the sizes of these domains drastically increase with high growth rate in the supercooled liquid temperature region. The Cu-rich domains are presumed to be associated with nucleation for the primary crystallization process.     

Effect of cerium on the growth and crystalline quality of KDP crystals

The effect of the addition of cerium in potassium dihydrogen phosphate, grown from aqueous solution by the temperature lowering method using bi-direction seed rotation technique has been studied. The optimal addition of trivalent cerium ions considerably prevents other bivalent transition metal ions (Co, Ni, Mn) from entering into the crystal lattice and results in reduced defects and dislocations. A simple microcontroller based bi-directional accelerated seed rotation control setup is designed and employed to avoid stagnant regions or re-circulating flows in the solution. High-resolution XRD analysis of the (002) plane reveals that the Ce³⁺ added KDP exhibited better crystalline perfection and contains less dislocation.     

A novel optical burst switching scheme—logical cascaded private subnet with start wavelength assignment policy

Many recent studies have convincingly demonstrated that network traffic exhibits a noticeable self-similar nature, which has a considerable impact on network performance, and most studies of optical burst switching (OBS) networks are under a fundamental assumption that full wavelength conversion is available throughout the network. In practice, however, economic and technical considerations are likely to dictate a more limited and sparse deployment of wavelength converters in the optical network. Therefore, we present a novel scheme for OBS networks, called logical cascaded private subnet (LCPN) with start wavelength assignment policy. We define the concept of canoe relative to cluster in self-similar traffic, and introduce a new device named payload segregator at the edge node as a gateway to the core node in OBS Networks. According to the changes in the edge node framework, we put forward the concept of cluster private subnet and canoe private subnet in the core node correspondingly. A new start wavelength assignment policy is proposed for the absence of (full) wavelength conversion capabilities in the core node of OBS Networks. The performance study indicates that, our new scheme is robust under self-similar traffic and wavelength continuity constraint.     

Wiener models of direction-dependent dynamic systems

Analysis of systems with direction-dependent dynamics is currently limited to cases in which the dynamics in the two directions of the output are first order; results for such systems have been published for both pseudo-random maximum-length binary (MLB) and inverse-repeat maximum-length binary (IR-MLB) inputs. These relatively limited analytical results make it useful to examine alternative ways of modelling such systems and in this paper, Wiener models are considered for this purpose. Methods for optimising the Wiener model parameters by matching the system and model cross-correlation functions, outputs, and discrete Fourier transforms of the outputs are considered, and the results are compared. These methods are also applied to a first-order direction-dependent system with a maximum-length ternary (MLT) input, for which no analytical results are currently available, and to a second-order system with an IR-MLB input.     

Amorphous chromium silicide formation in hydrogenated amorphous silicon

The interaction between thin films of hydrogenated amorphous silicon and sputter-deposited chromium has been studied. Following deposition of the chromium films at room temperature, the films were annealed over a range of times and temperatures below 350°C. It was found that an amorphous silicide was formed only a few nanometers thick with the square of thickness proportional to the annealing time. The activation energy for the process was 0.55±0.05 eV. The formation process of the silicide was very reproducible with the value of density derived from the thickness and Cr surface density being close to the value for crystalline CrSi₂ for all films formed at temperatures ≤300°C. The specific resistivity of the amorphous CrSi₂ was ≈600 μΩ·cm and independent of annealing temperature.     

A three-dimensional non-epitaxial atomistic growth model for thin-film deposition: effect of surface mobility

The effect of the atomic mobility on a film surface has been studied by using a three-dimensional atomistic thin-film deposition model which simulates three-dimensional thin-film images, surface profiles and cross-sectional area pictures. In addition, quantitative results of surface RMS roughness, average film thickness, atomic coordination number and its distribution, and solid fraction of the deposited thin films, were obtained from the simulations. When the film surface mobility increased from 0.3 to 3.0, RMS roughness decreased from 6.5 to 1.1, solid fraction increased from 0.27 to 0.56 and average film thickness decreased from 40 to 28, due to the reduction of the voids within the film. The full-width half magnitude of the atomic coordination distribution became narrower indicating the increased degree of crystallization. With increase in surface mobility crossing the boundary to 1.5, the film evolved from a porous or loose columnar structure with voids, to a densely packed fibrous grain structure which can be categorized by the zone structure models.