Relaxor antiferroelectric-like characteristic boosting enhanced energy storage performance in eco-friendly (Bi0.5Na0.5)TiO3-based ceramics

Ideal relaxor antiferroelectrics (RAFEs) have high field-induced polarization, low remnant polarization and very slim hysteresis, which can generate high recoverable energy storage W_rec and high energy storage efficiency η, thus attracting much attention for energy storage applications. True RAFEs, on the other hand, are extremely rare, and the majority of them contain environmentally hazardous lead. In this work, we use a viscous polymer rolling process to synthesize a novel and eco-friendly 0.65Bi_0.5Na_0.4K_0.1TiO₃-0.35[2/3SrTiO₃-1/3Bi(Mg_2/3Nb_1/3)O₃] (BNKT-ST-BMN) dielectric material, which possesses a very typical RAFE-like characteristic. As a result, this material has a high W_rec of 4.43 J/cm³ and a η of 86% at an electric felid of 290 kV/cm, as well as a high thermal stability of W_rec (>3 J/cm³) over a wide range of 30–140 °C at 250 kV/cm. Our findings suggest that the BNKT-ST-BMN material could be a potential candidate for use in energy storage pulse capacitors.     

H∞ observer-based event-triggered sliding mode control for a class of discrete-time nonlinear networked systems with quantizations

This paper investigates the problem of H_∞ observer-based event-triggered sliding mode control (SMC) for a class of uncertain discrete-time Lipschitz nonlinear networked systems with quantizations occurring in both input and output channels. The event-triggered strategy is used to save the limited network bandwidth. Then, based on the zero-order-hold (ZOH) measurement, a state observer is designed to reconstruct the system state, which facilitates the design of the discrete-time sliding surface. Considering the effects of quantizations, networked-induced constraints and event-triggered scheme, the nonlinear state error dynamics and sliding mode dynamics are converted into a unified linear parameter varying (LPV) time-delay system with the aid of a reformulated Lipschitz property. By using the Lyapunov-Krasovskii functional and free weighting matrix, a new sufficient condition is derived to guarantee the robust asymptotic stability of the resulting closed-loop system with prescribed H_∞ performance. And then the observer gain, event-triggering parameter and sliding mode parameter are co-designed. Furthermore, a novel SMC law is synthesized to force the trajectories of the observer system onto a pre-specified sliding mode region in a finite time. Finally, a single-link flexible joint robot example is utilized to demonstrate the effectiveness of the proposed method.     

Immiscible liquid–liquid slug flow characteristics in the generation of aqueous drops within a rectangular microchannel for preparation of poly(2-hydroxyethylmethacrylate) cryogel beads

The microchannel liquid-flow focusing and cryo-polymerization is an efficient method for the preparation of cryogel beads with a narrow diameter distribution. In order to prepare cryogel beads with expected diameters, it is necessary to get insights in the liquid–liquid immiscible flow characteristics of the flow-focusing fluid and the monomer solution in microchannels. In this work, the slug flow behaviors of two immiscible liquids regarding the preparation of poly(2-hydroxyethylmethacrylate) (pHEMA) cryogel beads in a rectangular cross-junction microchannel were investigated experimentally by the high-speed imaging method. Correlations of the immiscible liquid–liquid slug flow parameters like the aqueous slug velocity and length, the aqueous slug nose and tail lengths, the water-immiscible slug length as well as the aqueous droplet size were obtained. The pHEMA cryogel beads were prepared under certain flow conditions and the bead sizes were measured by laser particle size analyzer. The obtained correlations were then employed to estimate the bead sizes and compared with those obtained experimentally. The results showed that the present correlations gave reasonable estimations of the mean bead diameters at various conditions and thus, could be useful and helpful in the preparation of cryogel beads with expected size distributions in rectangular microchannels.     

Geometric measures of modal controllability and observability of power system models

The proximity of the subspaces spanned by the individual columns of the B matrix to the one-dimensional A^t-invariant subspaces can be used as measures of modal controllability of a linear model. These measures and their duals of modal observability are calculated in this paper for two representations of a multi-machine power system with 39 buses and 10 generators. The conditioning of the eigensystem is checked for the classical representation and the more detailed representation. The practical significance of the measures is demonstrated by showing their relation to coherency.     

Fast and exact method for line outage studies in power systems

This paper presents an exact and fast method to evaluate the effect of line contingencies upon the system bus voltages. The base-case load flow, utilizing the second-order terms to reach a steady-state solution, has been extended to study the effect of different line outages. The Jacobian matrix of the base-case load flow is kept constant during the line outage studies, and a few additional terms are added in the iterative process to simulate a line contingency.The validity of the new method was tested by its application to the 220 kV 31-bus system representing the unified power network of Lower Egypt.     

Highly textured and strongly anisotropic TiB2 ceramics prepared using magnetic field alignment (9T)

Highly textured TiB₂ ceramics were prepared by slip casting an aqueous suspension in a magnetic field of 9 T, followed by sintering using Field Assisted Sintering Technology (FAST). Particle size refinement by ball milling improved both the degree of texturing and densification of the material (RD > 98 %). The sintered material exhibited a Lotgering orientation factor of 0.90, with the c-axis of TiB₂ oriented parallel to the magnetic field and FAST pressing direction. The texturing effect induced by the uniaxial pressing was negligible. The textured TiB₂ material exhibited a significant anisotropy in mechanical properties; the values of hardness and indentation elastic modulus measured along directions transverse to the c-axis of TiB₂ were 37 % and 13 % higher than the ones measured along the c-axis direction. Moreover, the specific wear rate of a surface of textured TiB₂ parallel to the field was one order of magnitude lower than a surface perpendicular to the field.     

The influence of activated carbon as an additive in anode materials for low temperature solid oxide fuel cells

The effects of activated carbon (AC) as an additive in multi-oxide nano composite LiNiCuZn–O for application as anode in solid oxide fuel cell (SOFC) is reported. The composite was synthesized using solid state reactions method with varying content of AC in range 0.1%–0.9% for use as anode in the cell. The cell was composed of the synthesized composite as anode, LiNiCuZn–O as cathode and Samaria doped ceria (SDC) as electrolyte. The prepared composites were characterized for morphology and crystal structure by scanning electron microscope (SEM) and x-ray diffraction (XRD) respectively. Furthermore, the crystallite sizes of LiNiCuZn–O and LiNiCuZn–O with AC as an additive have been found in the range from 50 nm to 70 nm. The prepared composite materials were observed porous and the porosity of the sample having 0.5% additive was found highest. The conductivity and power density of the SOFC were studied at temperature of 600 °C. The maximum value of conductivity was found as 4.79 S/cm for the composite containing 0.5% AC as measured by using 4-probe method. The maximum value of power density of the fuel cell with anode comprising of 0.5% AC along with the mentioned cathode and the electrolyte was 455 mW/cm². Therefore, out of the compositions studied, the composite comprising of LiNiCuZn–O with 0.5% AC offered best performance for anode in the cell. This oxide composite is reported as a potential candidate for use as anode in low temperature SOFCs.     

Improvement of gold electrode conductivity after cofiring with CaO–B2O3–SiO2 green tapes for LTCC application

The cofiring process of Au paste containing various amount of glass additive with different properties and CaO–B₂O₃–SiO₂ (CBS) green tapes was investigated. The initial shrinkage temperature of Au paste was strongly associated with the softening point and the content of glass additive. The swell of sample and its mechanism during cofiring process was reported. The sheet resistivity of Au electrode was greatly depended on the content of CBS glass additive. When the content of CBS glass additive with the softening point of 704 °C was 3 wt %, the Au electrode exhibited the highest conductivity with the sheet resistivity of 2.4 mΩ/sq. The results obtained in this paper revealed the relationship between the glass additive and cofiring defects of Au electrode in the metal/ceramic multilayer structure, which gave an avenue to manufacture Low temperature co-fired ceramics (LTCC) modules with good quality.