Pitting corrosion resistance of La added 316L stainless steel in simulated body fluids

Lanthanum (La), a rare earth element with anticoagulative and antiphlogistic function, was added into the medical grade 316L stainless steel in order to improve its biocompatibility. The corrosion resistance of the La added 316L steel in two different simulated body fluids, simulated blood plasma and Hank's solution, was evaluated. The result showed that the addition of La in the steel could largely affect the corrosion behavior of the steel. The steel with 0.01% La showed the widest passive region and the best resistance to pitting attack, within the addition range of La from 0.01% to 0.08%. The corrosion resistance improvement of La added 316L stainless steel is probably due to the effect of La on the purification of the steel, the modification of inclusions, and the passive film formation in the simulated body fluids.     

非常规开采顺序在鸡冠嘴金矿二期采区的应用

针对鸡冠嘴金矿二期采区矿体(群)延深较大、走向较短、在垂向上中部较厚、品位较高呈“菱形”变化的特点，通过技术经济比较和岩石力学研究论证，并结合国内、外类似矿山的生产实践，提出并采用了不同于常规的首先开采矿体(群)中部的开采方法，从而为提高矿山生产初期的经济效益，尽早偿还基建贷款提供了一条新的成功经验。     

Study of the effect of ultrasonic treatment on the surface composition and the flotation performance of high-sulfur coal

This paper highlighted the use of X-ray diffraction, scanning electron microscopy and X-ray fluorescence spectroscopy to investigate the changes on the surface composition of high-sulfur coal and pyrite before and after ultrasonic conditioning. The results showed that ultrasonic conditioning resulted in a decrease in the contents of iron and sulfur in coal, an increase in the content of element carbon, and an increase in the purity of the coal. Conversely, ultrasonic conditioning led to an increase in the content of iron and sulfur in pyrite, a decrease in the impure content of calcium, and a relative increase in the purity of the pyrite after ultrasonic conditioning. This study verified that on the one hand, ultrasonic conditioning can promote the pyrite separation from the high-sulfur coal, with the separated pyrite taking the form of FeS; on the other hand, it can produce a cleaning effect on the surface of coal and pyrite with the consequent increase both in hydrophobicity of coal and hydrophilicity of pyrite. The paper introduced ultrasonic pre-treatment of the slurry and stepped froth removal tests of high-sulfur coal and the study on the yield, ash and sulfur content of clean coal in different phases. The results gave further evidence of the increases both in the rate and the selectivity of flotation. This study shows that ultrasonic conditioning can enhance the performance of de-sulphurization of high-sulfur coal flotation.     

Flexural retrofit of a bridge subjected to overweight trucks using CFRP laminates

The reinforced concrete spans of a bridge subjected to extreme vehicular loads are investigated and retrofitted with carbon fiber reinforced polymer (CFRP) laminates. A finite element model of the bridge superstructure was created to determine the forces resulting from extreme loads. A moment–curvature analysis was subsequently carried out to investigate the flexural characteristics of the reinforced concrete sections prior to and after strengthening with CFRP laminates. The analytical modeling concluded that significant strength can be gained at the ultimate limit state, while relatively small increase in strength is observed at service load levels. The increase in flexural resistance at ultimate does provide an adequate margin of safety against further overloading. The analytical investigation and the retrofitting work are presented herein.     

Facile synthesis of ordered nanocrystalline alumina thin films with tunable mesopore structures

Mesoporous alumina layers have attracted attention for their potential use in ultrafiltration of salts, as a heterogeneous catalyst support, an adsorbent in environmental cleanup, and in petroleum refinement. The ability to control the fast hydrolysis rate of the inorganic precursors using simple and inexpensive routes is important for that potential to be realized. Herein, we introduce a novel and facile route to synthesize mesoporous alumina thin films from the combination of inexpensive and commercially available copolymer with aluminum chloride or nitrate (salts) in an EtOH–surfactant–NH₃ · H₂O–salts (EsNs) system through the evaporation-induced self-assembly (EISA) method. Mesoporous alumina layers obtained utilizing the EsNs system have ordered and tunable pore structures. The ability to easily control the mesophases of the alumina layers within a short time provides distinct advantages over previously reported synthesis procedures. Most importantly, we demonstrate that the binding of surfactant and NH₃ · H₂O for the formation of hydrogen bond between them in the EsNs system controls the fast hydrolysis rate of the inorganic species. This allows for the synthesis of nanocrystalline alumina layers via the aluminum oxo-clusters’ assembly with the surfactant. Such simple route may be applied in the synthesis of other non-silica mesostructured oxides.     

基于传感器信息的机器人精密装配作业分析

介绍了一个应用力传感器组成的智能机器人精密装配作业的宏／微操作系统，它能够完成一般凸形销孔零件沿任意方向的精密装配作业。     

利用射线路径反演层状介质速度的方法

本文根据欧拉方程对于连续层状介质进行了方程推导，得出一个波传播的射线路径公式，利用中 公式导出了ＶＳＰ资料处理中的速度反演公式。     

电流变体特性及电流变体应用器件的进展

本文详细评述了电流变体(ERF)材料的组成、工作机理及其流变力学性能,提出以Bingham塑性体来近似描述电流变体的流变特性,综述了电流变体在智能材料、汽车离合器、液压阀门等器件中的应用,给出了含电流变体的双层智能复合材料梁单层、双层加电状态对其振动特性的影响,设计了含电流变体的主动控制式减振器,并对其在外加电场作用下的减振性能进行了评价。     

饮用水氯化中氯仿形成的动力学模式

以黄腐酸（ＦＡ）为卤仿前驱物质，分别测定不同投氯量、ＴＯＣ水平、温度以及ｐＨ值对ＣＨＣｌ３形成速率的影响，确定出ＣＨＣｌ３形成的动力学模式。该模式可用于预测投氯后的管网水中ＣＨＣｌ３的形成量，以便采取必要措施保证饮用水符合国家规定ＣＨＣｌ３〈６０μｇ／Ｌ的标准。