B位掺杂钙钛矿结构化合物LaSr2Mn2-xFexO7的电磁性能

研究了以Fe离子(Fe3 )掺杂取代部分锰(Mn)离子的层状钙钛矿结构化合物LaSr2Mn2-xFexO7(O≤x≤O.3)的电性和磁性.结果发现:Fe3 的掺杂抑制了LaSr2Mn2-xFexO7低温的反铁磁性交换作用,使Neel温度TN由x=0的138K降至x=0.3的l0lK.同时,LaSr2Mn2-xFex07的自旋玻璃态、电荷有序和金属一绝缘体转变温度都由于Fe3 取代Mn离子而受到抑制.产生上述现象的原因是因为Mn位被取代导致产生无序状态.由于Fe3 取代Mn粒子,致使双交换作用通道被打破,化合物的电阻率随x的增加而迅速增加.所有化合物的电阻率在低温阶段都可以用Mott的变程跳跃理论来拟合;在高温阶段可以用最近小声子极化理论来拟合.     

Electrochemical reaction of the SiMn/C composite for anode in lithium ion batteries

The SiMn-graphite composite powder was prepared by mechanical ball milling and its electrochemical performances were evaluated as the candidate anode materials for lithium ion batteries. It is found that the cyclic performance of the composite materials is improved significantly compared to SiMn alloy and pure silicon. The heat treatment of the electrodes is beneficial for enhancing the cyclic stabilities. The SiMn-20 wt.% graphite composite electrode after annealing at 200 °C has an initial reversible capacity of 463 mAh g⁻¹ and a charge-discharge efficiency of 70%. Moreover, the reversible capacity maintains 426 mAh g⁻¹ after 30 cycles with a coulomb efficiency of over 97%. The phase structure and morphology of the composite were analyzed by X-ray diffraction (XRD) and scanning electron microscopy. The lithiation/delithiation behavior was investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The composite materials appear to be promising candidates as negative electrodes for lithium rechargeable batteries.     

MDD应用于RIA的建模研究

分析RIA技术的特征,研究如何将MDD（模型驱动开发）应用在RIA领域当中,即针对WebML做扩展并模型化RIA应用,完成开发的建模阶段,最后以库存管理系统（IMS）为例给出示意图。     

Mechanical Properties of Phenolic-Resin Composites Reinforced with CF/BF Interlayer Hybrid Fibers

Phenolic-resin composites reinforced with carbon fiber (CF) and basalt fiber (BF) interlayer hybrid fibers plain fabric were fabricated. The tensile strength, compressive strength and interlaminar shear strength of the prepared composites were studied. The results indicated that hybrid fibers reinforced composites possessed the advantages of both CF and BF. When resin content was 35% by volume fraction, the comprehensive mechanical performance of BF/CF reinforced phenolic resin composites reached the optimal values with the warp and weft direction tensile strength, compressive strength and interlayer shear strength being 252 MPa and 487 MPa, 105 MPa and 129 MPa, 21 MPa and 20 MPa, respectively. The scanning electron microscope (SEM) observations showed that the BF/CF hybrid fibers reinforced composites had better interfacial adhesion.     

A general method for modified function projective synchronization

This paper investigates the modified function projective synchronization,which means that the drive system and the response system are synchronized up to a desired scale matrix of function. By the active control scheme,a general method for modified function projective synchronization is proposed. Numerical simulations on chaotic Rssler system and hyper-chaotic Chen system are presented to verify the effectiveness of the proposed scheme.     

基于PC/104的转塔控制系统CAN总线接口设计

在复杂的电磁环境下,采用CAN总线作为实时通讯总线是一个很好的选择。基于PC/104的某转塔控制系统CAN总线的接口设计采用经典的SJA1000作为CAN总线控制器,82C250作为CAN总线收发器,提出了一种采用CPLD实现PC/104总线和SJA1000总线间的读写时序转换的实用技术,并在通信通道上采用光电隔离技术,从而实现了系统的CAN通讯接口设计。该设计简洁可靠,可以很容易地移植到其它嵌入式系统中,并且设计已在某型转塔的调试中得到反复验证。     

Simulation analysis on influential factors of stick-slip

In this paper a new physical model for studying stick-slip is established. Based on the dynamics system of the model,the state equation of the system is presented. And simulation analysis on the influential factors of stick-slip is carried out. The relationship between stiffness ( horizontal and normal) ,dampness,mass, difference of static and kinetic coefficients of friction,driving velocity,and amplitude in normal direction is analyzed and parameters of stick-slip are evaluated. Results show that stick-slip can be reduced by improving horizontal stiffness,decreasing dampness,reducing mass,cutting down the difference of static and kinetic coefficients of friction,properly choosing the vertical stiffness and properly inducting the normal oscillation.     

Tests and numerical simulation on curved blade of super-critical adjust stage

Tests and numerical simulations of super-critical adjust stage blade were carried out and the effect of bowed blade on flow characteristics and the secondary flow were analyzed. The simulation and test results show that the adjust stage blade with aft-loading and big front-edge radius has good flow characteristics by meridian shrink. The numerical studies were carried out with software of NUMECA in order to investigate the aerodynamic characteristics of adjust stage blades,which include prototype blade(tested blade) ,positive curved blade (15°) and negative curved blade(-15°) . The simulation results show that the positive curved blade forms a negative static pressure gradient in the lower region of the cascade along the blade height and a positive static pressure gradient in the upper region. This leads to the reduction of the streamwise vortices intensity and the aerodynamic load on both sides of the blade and the endwall. Therefore,the crosswise secondary flow losses of endwall can be decreased considerably.     

Robust parametric approach for tracking control of an air-breathing hypersonic cruise vehicle

To realize the stabilization and the tracking of flight control for an air-breathing hypersonic cruise vehicle, the linearization of the longitudinal model under trimmed cruise condition is processed firstly. Furthermore, the flight control problem is formulated as a robust model tracking control problem. And then, based on the robust parametric approach, eigenstructure assignment and reference model tracking theory, a parametric optimization method for robust controller design is presented. The simulation results show the effectiveness of the proposed approach.