高效液相色谱法测定稻·恶乳油中稻瘟净和恶霉灵的含量

本文采用高效液相色谱法 ,对稻瘟净和恶霉灵的复配制剂进行分析 ,色谱柱 2 5 0mm× 4 6mm不锈钢柱 ,内装BDSC18填充物 ,检测波长 2 2 0nm ,流动相 :乙腈 +水 =6 0 +4 0 (v/v) ;回收率 :稻瘟净 99 5 %～ 10 0 5 % ,恶霉灵 99 3%～ 10 0 6 % ,变异系数分别为 :0 41%和 0 6 9% ,为稻 恶乳油产品的质量控制建立了准确、快速的分析方法     

变频器常见故障分析和处理

本文通过介绍变频器主回路的组成部分,分析了变频器主回路常见故障产生的原因,同时通过实例解决变频器主回路常见故障的维修处理方法。     

工业控制系统中可靠性设计的研究

本文主要阐述了在工业生产控制系统中,可靠性设计中的热设计、电磁防护设计、机械防震设计,提出了可靠性设计中应当注意的问题,以及一些解决问题的方案和办法.热设计中应当主要注意温度,电磁防护设计中应当主要注意屏蔽和接地,机械防震设计中应当主要注意防震.     

重介洗煤密度自控系统研究

目的：本文介绍了PLC在洗煤厂的介质密度控制中的应用,针对介质密度变化规律性不强,大滞后等特点作出调整。方法：采用VB编程语言结合专家算法的方针,提出了一个解决方案,提高了控制密度精度。结果：使物料浓度配比更加合理,趋势变化更容易让现场人员接受。结论：提高了产煤精度及生产效率,节约了能源的同时为洗煤厂创造更大的经济回报。     

Electrochemical insertion of lithium into a doped diamond film grown on carbon felt substrates

This paper summarizes the preliminary results obtained from lithium electrochemical intercalation into boron-doped diamond films grown on carbon felt (BDD/CF electrode). BDD films have been grown by Hot Filaments Chemical Vapor Deposition (HFCVD) and have been characterized by Scanning Electron Microscopy (SEM) and Raman Scattering spectroscopy. BDD/CF composite electrodes, which contain a diamond layer, lead to higher conductivity and smaller grain sizes. In turn, they are richer in boundary or sp² sites, and present a reversible specific capacity that is much larger than that of the substrate alone, indicating that the diamond layer effectively participates in lithium storage. Diamond layers displaying boron doping levels of 10¹⁹ and 10²¹ part cm^− 3 provide a specific capacity of 160 and 370 mA h g^− 1, respectively, which is associated with lithium storage.     

New approach for calculating permanent deformation in asphalt pavement

A new approach using the Fiber Bragg Grating(FBG)sensor and viscoelastic model to monitor and analyze the internal strain and temperature of asphalt pavement is proposed.Some parameters including peak strain,temperature and loading time were calculated with the application of multi-dimensional sensors group.These parameters were incorporated with viscoelastic model of five units to evaluate the permanent deformation of pavement.An application example was conducted,and the results show that it is feasible to analyze and calculate the permanent deformation of pavement structures with FBG sensors.     

Shear performance analysis of a heavy-duty universal hinged cast steel support

This paper presents the shear performance analysis of a heavy-duty universal hinged cast steel support with the largest bearing capacity. The effect of 9 parameters ( 52 specimens) ,i. e. height of the upper support,depth of the ring of the upper support,depth of the top plate of the bottom support,height of the ribs of the bottom support,depth of the ribs of the bottom support,bolt hole diameter,number of the ribs of the bowl,depth of the ribs of the bowl,and yield strength of the material,were analyzed with a 3-dimensional elastic-plastic finite element model in which the nonlinearities of geometry,material and contact were all considered. Analysis shows that height of the upper support,depth of the ring of the upper support and yield strength of the material have a great effect on the mechanical performance of the support. Height of the upper support has the largest effect on performance price ratio of the support,and the maximum effect can be up to 160% . Depth of the top plate of the bottom support,height of the ribs of the bottom support and depth of the ribs of the bottom support have a medium effect on performance price ratio of the support,and the effect is within the limit of 15% 19% .     

A force control high-order single-step-β method (HSM) for substructure pseudo-dynamic testing

This paper proposes a new technique which introduces the high-order single-step-β method(HSM)into the experimental study on the substructure pseudo-dynamic testing(SPDT).The technique is based on the proposed concept of equivalent shear stiffness which can meet the requirement of the HSM algorithm.A study is done to theoretically validate the technique by the numerical analysis of two-storey shear building structure,in comparison of the proposed substructure pseudo-dynamic testing algorithm with the central difference method(CDM).Then,a full-scale SPDT model,the three-storey frame-supported reinforced concrete short-limb masonry shear wall structure,is designed and tested to simulate the seismic response of the corresponding six-storey structure and verify the proposed force control HSM technique.Meanwhile,the techniques of both stiffness correction and force control are suggested to control algorithmic error,control error and measurement error.The results indicate that the force control HSM can be used in the full-scale multi-degree-of-freedom(MDOF)substructure pseudo-dynamic testing before descent segment of structure restoring force properties.     

Treatment of methanol wastewater with two-stage and two-phase anaerobic process

The two-stage and two-phase anaerobic process (TSTP) composed of hydrolytic acidification reactor,first-order and second-order external circulation anaerobic reactors (EC) was taken to treat methanol wastewater. Test results show that TSTP process is quick start-up in 51 d, and the maximum VFA of hydrolytic acidification reactor effluent reaches 876 mg/L. Under the condition of volume loading of 6.56 kgCOD/m3·d, COD removal rate of the first-order EC reactor is about 85%, and under the condition of volume loading of 1.02 kgCOD/m3·d, COD removal rate of the second-order EC reactor is about 50%. When the inflow COD of TSTP process is between 7000-11000 mg/L, its effluent COD is lower than 600 mg/L. In the biological conversion process of methanol into methane,the production of acetic acids as an intermediate product can be ignored and the direct production of methane from methanol is predominant.     

Removal characteristics of disinfection by-products formation potential by bioaugmentation activated carbon process

The high-active bacteria were screened from 8 dominant bacteria obtained from the natural water body,and then the bioaugmentation activated carbon was formed by hydraulic immobilization of the high-active bacteria. Plant-scale studies on removal characteristics of disinfection by-products formation potentials (DBPFP) by bioaugmentation activated carbon process were conducted for micro-polluted raw water treatment. The results show that the bioaugmentation activated carbon process has adopted better purification efficiency to THMFP and HAAFP than traditional biological activated carbon process,and that average removal efficiencies of THMFP and HAAFP can reach 35% and 39.7% during the test period,increasing by more than 10% compared with traditional biological activated carbon process. The removal efficiencies of THMFP and HAAFP are stable because of the biodegradation of the high-active bacteria and the adsorption of active carbon. The biodegradability of CHCl3 formation potential is better as compared with that of CHCl2Br and CHClBr2 formation potentials among THMFP,and high removal efficiency of CHCl3formation potential is obtained by bioaugmentation degradation of the high-active bacteria. The biodegradability of HAAFP is better in comparison with that of THMFP,and the chemical properties of HAAFP are propitious to adsorption of activated carbon. Thus,HAAFP is on predominance during the competitive removal process with THMFP.