In Situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO2 (Ti)-Al-B (B2O3) systems

Particulate TiB₂ reinforced aluminum-based metal matrix composites (MMCs) were successfully fabricated by means of the reaction processing method. TiB₂ particulates were formed in situ through the reaction of Ti and B in Ti-Al-B, TiO₂ and B in TiO₂-Al-B, and TiO₂ and B₂O₃ in TiO₂-Al-B₂O₃ systems. The results showed that in situ TiB₂ particulates formed in the Ti-Al-B system had a size of 5 μm and they exhibited block and rodlike structures. Moreover, coarse Al₃Ti blocks several tens of micrometers in size were also formed simultaneously. On the other hand, equiaxed Al₂O₃ and TiB₂ particulates with a size of less than 2 μm were formed in situ in the TiO₂-Al-B and TiO₂-Al-B₂O₃ systems. The Al₃Ti phase was completely eliminated in the TiO₂-Al-B system with increasing B content. Tensile tests revealed that the Al₂O₃ · TiB₂/Al composite fabricated from the TiO₂-Al-B system exhibits excellent mechanical properties. The yield strength of the Al₂O₃ · TiB₂/Al composite appeared to increase with increasing TiB₂ content. The yield strength of the Al₂O₃ · TiB₂/Al composite could be further increased by introducing CuO into the TiO₂-Al-B system. Such an increment in mechanical strength arose from the strengthening effect caused by the Al₂Cu precipitates. The incorporation of CuO had no effect on the in situ reaction process of the TiO₂-Al-B system. Finally, the effect of SiC addition on the microstructure and mechanical properties of the composites fabricated from the TiO₂-Al-B and TiO₂-Al-B-CuO systems was also investigated.     

Quantitative prediction of the degree of pollution of effluent from reactive dye mixtures

By using mathematical formulae developed in previous studies, certain pollution parameters of dye effluent obtained from reactive dyeing with a single dye can be predicted with good accuracy. In this study, the degree of pollution of reactive dyeing effluent using dye mixtures was also predicted by other approaches, such as linear and non-linear regression. The prediction accuracy was found to be satisfactory.     

Well-posedness of dual-phase-lagging heat conduction equation: higher dimensions

The dual-phase-lagging heat conduction equation is shown to be of one unique solution for a finite region of dimension n (n?2) under Dirichlet, Neumann or Robin boundary conditions. The solution is also found to be stable with respect to initial conditions. The work is of fundamental importance in applying the dual-phase-lagging model for the microscale heat conduction of high-rate heat flux.     

Effect of misalignment on electrical characteristics of ACF joints for flip chip on flex applications

The effect of misalignment on the electrical properties of anisotropic conductive film (ACF) joints is investigated in this work. It is found that along with the increase of misalignment, the connection resistance of ACF joints increases. When the misalignment in x-direction is less than 5 μm, the increase rate of connection resistance is quite large. Then, along with the severity of misalignment, the increase rate becomes smaller. Finally, when the misalignment is close to 20 μm, the increase rate rises again. The Holm's electric contact theory is used for understanding the connection resistance variation. On the other hand, with the increase of misalignment in x-direction, the insulation resistance between ACF joints decreases. If the misalignment exceeded 10 μm, the decrease is prominent for the Ni particle ACF joints. This phenomenon can be explained by the effect of dielectric damage of the epoxy.Computer programs are also developed to calculate the variation of the probability of open and shorting after misalignment and predicate the maximum misalignment tolerance. The results show that the open and shorting probability increase abruptly after misalignment. On the view of pad parameters, the open probability is mainly related to the pad area, while the pads gap is critical to the shorting probability. Large pads gap (small pad width) can reduce the shorting probability obviously. On the other hand, enlarging the pad area by increasing pad length decreases the open probability significantly. So comparing to square shape pad, rectangle shape pad can reduce the failure probability greatly.     

Fringe probing of an evaporating microdroplet on a hot surface

The phenomenon of droplets impacting and evaporating on a hot surface is of interest in many areas of engineering. Quantitative measurement of these processes provides great help to reveal the physics behind. A novel technique was developed to quantitatively measure the volume evolution and contact diameter of an evaporating microdroplet on a hot surface utilizing interference fringe scattering method. In this method, fine fringes produced by the interference of two coherent laser beams was scattered by the droplet and projected onto a screen. The profile and volume of the droplet can be derived from the spatial fringe spacing on the screen. The number of total fringes measurable on the screen was used to determine the instantaneous contact diameter of the microdroplet. Validation experiments demonstrated that the measurement errors are less than ±5% and ±1% for microdroplet volume and contact diameter, respectively. By using this method, the dynamic of droplet impingement, evaporation and boiling using ethanol, pure water and water solution of a surfactant (sodium dodecyl sulfate) with impact velocity of 7.5 m/s and diameters ranged from 0.19 to 0.46 mm were investigated.     

Waveband-switchable SOA ring laser constructed with a phase modulator loop mirror filter

An electrically tunable multiwavelength source has been developed using a birefringence-based optical comb filter in a semiconductor optical amplifier ring laser. The filter is constructed with an electrooptic phase modulator placed inside a fiber loop mirror. By controlling the birefringence of the modulator through the applied bias, the radio-frequency power, or the modulation frequency, we achieve a continuous shift of the spectral comb to access different interleaved wavebands. Electrical waveband switching has been successfully demonstrated for 21 wavelengths at 100-GHz grid spacing with an optical signal-to-noise ratio over 40 dB.     

A new polysilicon CMOS self-aligned double-gate TFT technology

In this paper, a new polysilicon CMOS self-aligned double-gate thin-film transistor (SA-DG TFT) technology is proposed and experimentally demonstrated. The self-alignment between the top- and bottom-gate is realized by a backlight exposure technique. The structure has an ultrathin channel region (300 /spl Aring/) and a thick source/drain region. Experimental results show that this technology provides excellent current saturation due to a combination of the effective reduction in the drain field and the full depletion of the ultrathin channel. Moreover, for n-channel devices, the SA-DG TFT has a 4.2 times higher on-current (V/sub gs/=20V) as compared to the conventional single-gate TFT. Whereas for the p-channel devices, the SADG TFT has a 3.6 times higher on-current (V/sub gs/=-20V) compared to the conventional single-gate device.     

On the macroscopic optimization of multicell wireless systems with multiuser detection and multiple antennas - uplink analysis

In this paper, we consider a system with K single-antenna client users, n/sub B/ base stations (each base station has n/sub R/ antennas), as well as a centralized controller. A client user could be associated with a single base station at any time. All the base stations operate at the same frequency and have optimal multiuser detection per base station which cancels intracell interference only. We consider a general problem of uplink macroscopic resource management where the centralized controller dynamically determines an appropriate association mapping of the K users with respect to the n/sub B/ base stations over a macroscopic time scale. We propose a novel analytical framework for the above macroscopic scheduling problems. A simple rule is to associate a user with the strongest base station (camp-on-the-strongest-cell), and this has been widely employed in conventional cellular systems. However, based on the optimization framework, we found that this conventional approach is in fact not optimal when multiuser detection is employed at the base station. We show that the optimal macroscopic scheduling algorithm is of exponential complexity, and we propose a simple greedy algorithm as a feasible solution.     

Hallucinating face by eigentransformation

In video surveillance, the faces of interest are often of small size. Image resolution is an important factor affecting face recognition by human and computer. In this paper, we propose a new face hallucination method using eigentransformation. Different from most of the proposed methods based on probabilistic models, this method views hallucination as a transformation between different image styles. We use Principal Component Analysis (PCA) to fit the input face image as a linear combination of the low-resolution face images in the training set. The high-resolution image is rendered by replacing the low-resolution training images with high-resolution ones, while retaining the same combination coefficients. Experiments show that the hallucinated face images are not only very helpful for recognition by humans, but also make the automatic recognition procedure easier, since they emphasize the face difference by adding more high-frequency details.