Analysis of a Novel Flux-Weakening Structure of High-Speed Permanent-Magnet Motors Based on Soft-Magnetic Ferrite

Soft-magnetic ferrite has advantages of high initial magnetic permeability, high electric resistivity, low loss and low cost in the high-frequency alternating field. Considering the characters of soft-magnetic ferrite, this paper uses a soft-magnetic ferrite ring as stator core and presents a novel field-weakening structure of high speed PM motors. Based on this structure, a novel field-weakening method of PM motors can be presented. The equivalent reluctance of permanent magnetic field circuit can be changed by altering saturation degree of soft-magnetic ferrite core in this method. For the convenience of analysis and calculation, considering the magnetic field distribution in the motors, this paper deduces an equivalent two-dimensional finite element model of three-dimensional magnetic field, by which the field-weakening parameters of high speed PM motor can be conveniently analyzed. The simulation results of finite element model prove: the field-weakening structure of high speed PM motor based on soft-magnetic ferrite, presented in this paper, is valid and feasible, offers a valid and applicative method for field-weakening control of high speed PM motor.     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

HCI reality—an ‘Unreal Tournament’?

The cooperation between designers, engineers and scientists in the human–computer interaction (HCI) community is often difficult, and can only be explained by investigating the different paradigms by which they operate. This study proposes a paradigm model for designers, engineers and scientists, using three barriers to separate the professions. We then report on an empirical study that attempted to validate the understand/transform world barrier in the paradigm model using an online questionnaire. We conclude that the used ‘Attitude About Reality’ scale was unsuitable for measuring this barrier, whereas information about the educational background of the participants was a good predictor for the self-reported profession (designer, engineer or scientist). Interestingly, among the three professions, engineers appear to be the cohesive element, since they often have dual backgrounds, whereas very few participants had dual science/design backgrounds. Engineers could, therefore, build a bridge between designers and scientists, and through their integrative role, could guide the HCI community to realizing its full potential.     

ID-based threshold decryption secure against adaptive chosen-ciphertext attack

This paper proposes an identity-based threshold decryption scheme IB-ThDec and reduces its security to the Bilinear Diffie-Hellman problem. Compared with previous work, this conceals two pairing computations in the ciphertext validity verification procedure. The formal proof of security of this scheme is provided in the random oracle model. Additionally, we show that IB-ThDec can be applied to the threshold key escrow and the mediated cryptosystems.     

Noble metal water gas shift catalysis: Kinetics study and reactor design

Based on the water gas shift (WGS) catalytic mechanism on precious metal catalyst, a Langmuir–Hinshelwood (LH) kinetics model was derived for the operating conditions of syngas from natural gas reforming at near-ambient pressure. A power law kinetics model was also presented for comparative purpose. These two kinetics models were integrated in a dynamic distributed reactor model for design of full-scale WGS reactors for a natural gas fuel processing system. Modeling results indicated that the LH kinetics model gives predictions of reactor performance closer to the experimental data. Using the LH kinetics model, optimization of operating conditions for the high-temperature shift (HTS) and low-temperature shift (LTS) reactors was also attempted.     

Theoretical and experimental investigation of flow and heat transfer in an internally-heated naturally-ventilated space

This paper presents the findings of a theoretical and experimental investigation of the thermodynamics of an internally heated control volume, ventilated by natural convection. A simple bench-type experiment has been used to determine the temperature history of the air, in support of a global calculation by numerical methods. Good agreement has been achieved between the experimental results and the mathematical prediction, which has wide ranging applications in practical situations.     

Cyclic fatigue of long and short cracks in alumina

The cyclic fatigue behaviour of long and microstructurally short cracks in a 10 μm grain-size alumina has been investigated. This material was found to be stress sensitive, a modest drop in applied stress resulting in a considerable lifetime enhancement. The growth of long cracks was studied using the circular compact tension geometry and was found to follow a Paris law behaviour. The crack path was entirely intergranular in this material with long fatigue crack growth governed by the degradation of crack-wake bridging. Short-crack growth was investigated using indented discs in a biaxial flexure geometry. Short cracks were observed to grow at lower values of applied ΔK than long cracks, increasing with crack length as bridging of the crack wake increased. The fatigue crack growth of AD90 alumina was also investigated by in situ testing within the specimen chamber of an SEM. The long-crack behaviour was found to be similar to the 10 μm grain-size alumina and other data reported in the literature. However, the crack path followed a mixture of transgranular and intergranular fracture and discontinuous in nature with frequent arrests. The crack-advancement mechanisms in these two alumina materials are different and affect the short-crack behaviour. However, in both cases the long-crack behaviour is dominated by crack-wake effects. This revised version was published online in November 2006 with corrections to the Cover Date.     

Brief Overview of Recent Developments on Negative Phase–Velocity Mediums (alias Left–Handed Materials)

This brief overview covers a rapidly occurring development in the area of microwave composite materials: isotropic dielectric–magnetic mediums wherein the phase velocity vector and the time–averaged Poynting vector are oppositely directed. Such materials have also been inappropriately designated as left–handed materials. Ramifications for aberration–free lenses, homogenization approaches, and complex mediums are also presented.     

Tributary use and large-scale movements of grass carp in Lake Erie

Infrequent captures of invasive, non-native grass carp (Ctenopharyngodon idella) have occurred in Lake Erie over the last 30+ years, with recent evidence suggesting wild reproduction in the lake’s western basin (WB) is occurring. Information on grass carp movements in the Laurentian Great Lakes is lacking, but an improved understanding of large-scale movements and potential areas of aggregation will help inform control strategies and risk assessment if grass carp spread to other parts of Lake Erie and other Great Lakes. Twenty-three grass carp captured in Lake Erie’s WB were implanted with acoustic transmitters and released. Movements were monitored with acoustic receivers deployed throughout Lake Erie and elsewhere in the Great Lakes. Grass carp dispersed up to 236 km, with approximately 25% of fish dispersing greater than 100 km from their release location. Mean daily movements ranged from <0.01 to 2.49 km/day, with the highest daily averages occurring in the spring and summer. The Sandusky, Detroit, and Maumee Rivers, and Plum Creek were the most heavily used WB tributaries. Seventeen percent of grass carp moved into Lake Erie’s central or eastern basins, although all fish eventually returned to the WB. One fish emigrated from Lake Erie through the Huron-Erie Corridor and into Lake Huron. Based on our results, past assessments may have underestimated the potential for grass carp to spread in the Great Lakes. We recommend focusing grass carp control efforts on Sandusky River and Plum Creek given their high use by tagged fish, and secondarily on Maumee and Detroit Rivers.     

Groundwater-surface water interactions and agricultural nutrient transport in a Great Lakes clay plain system

Nutrient export from agricultural land to surface waters is a significant environmental concern within the Great Lakes Basin (GLB). A field-based watershed-scale study was completed to investigate spatial and temporal variations of phosphorus and nitrate to assess nutrient transport pathways and groundwater-surface water interactions in an agriculturally dominated clay plain system. This was conducted in the 127 km² Upper Parkhill Watershed, near Lake Huron in southwestern Ontario, Canada. Data collection occurred from June 2018 to May 2019 via continuous sensor deployment and discrete sampling of stream water, groundwater, hyporheic zone, and tile drainage water. Samples were analyzed for various nutrient species (total, total dissolved, soluble reactive, and particulate phosphorus, and nitrate-N) to examine the hydrological dynamics of principal transport pathways of agriculturally-derived nutrients. Total phosphorus and nitrate concentrations in stream water ranged from 0.007 to 0.324 mg/L and 0.32 to 13.13 mg NO₃^?-N/L, respectively. Tile drainage water total phosphorous concentrations varied from 0.006 to 0.066 mg/L. Groundwater total dissolved phosphorus concentrations ranged from <0.003 to 0.085 mg/L. Transport of phosphorus through tile drainage was observed to be greater than through groundwater over the study period. No distinct relationship was observed between nutrient concentrations in the hyporheic zone and the vertical hydraulic gradient within this zone in the studied stream reach. Preliminary correlations were discerned between water quality observations and recognized land management practices. Given the elevated stream nutrient concentrations, these results are consequential for the continual improvement of strategies and programs devised to conserve water resources within the GLB.