APPLICATION OF GRAY SYSTEM THEORY IN SBS MODIFIED ASPHALT

A system whose partial information is known and partial information is unknown is called gray system. In this paper, the compatibility relationship between Styrene-Butadiene-Styrene (SBS) modifier and base asphalt composition was studied by correlation analysis method. The analysis results of correlation level show that aromatics and asphaltene of base asphalt affect SBS modified effect mainly as the content of SBS is lower, while the content of aromatics and resin become the main effect factors as SBS content is increased.     

A STUDY ON ACIDITY AND CATALYTIC PROPERTY OF [B] ZSM-5 CATALYST MODIFIED WITH SILICON COMPOUND BY CHEMICAL SURFACE DEPOSITION OF LIQUID-PHASE TECHNIQUE

The boron heteroatom zeolite catalyst has been modified with silicon compound by Chemical Surface Deposition of Liquid-phase (CLD) technique and the catalytic property of the modified catalyst is studied. Meanwhile, the acidity of the modified zeolite catalysts is characterized through TPD and IR technique, and the fluid adsorption method is used to determine its pore structure. The relationship between the catalytic property of the zeolite catalyst and its pore structure, its acidity has been found. The results of toluene-ethylene alkylation reaction indicate that the selectivity of p-ethyltoluene on the modified zeolite catalyst is higher than that on the zeolite catalyst before silanizated, reaching 94.14%.     

The influence of preparation method on the properties of NiMo sulfide catalysts supported on ZrO2

Highly loaded supported (Ni)Mo sulfide catalysts prepared using different methods have been studied. Two zirconia supports of high specific surface area were used, including amorphous or tetragonal ZrO₂ solids. The order of active components introduction as well as thermal treatment conditions were varied. The best performance in the reactions of hydrodesulfurisation of thiophene and hydrogenation of tetralin was shown by the coimpregnated systems sulfidized without calcination of the oxide precursor. Crystallized ZrO₂ support always provides higher activities in both reactions, than amorphous zirconia, despite very high specific surface area of the last. The differences between variously treated systems were explained using the results of characterizations including laser Raman spectroscopy, XPS spectroscopy and temperature programmed reduction.     

光化学方法活化CO_2为CO的研究进展

介绍了国内外近年来用光化学方法将CO2活化为CO的研究进展。目前,CO2活化为CO的光化学法主要有气相活化法、均相活化法和非均相活化法,对这些方法的特点及反应机理进行了总结。     

改进异步电机直接转矩控制系统的仿真研究

本文介绍了直接转矩控制系统的控制原理,并针对基于直接转矩控制的异步电动机运行时存在较大的电流及转矩脉动问题,提出一种新的控制方案,并基于Matlab 6.5对这种新方法进行仿真,仿真结果表明该方案能有效的解决电流及转矩脉动的问题.     

Moving beyond the fourth dimension with an IFC-based single project database

4D CAD has been an active research area for many years. The first generation 4D tools simulated construction schedules and demonstrated the potential benefits in several case studies. Researchers tried to improve the functionality of the first generation 4D tools by adding annotations and highlighting the building elements that have problems. The future generation 4D tools are expected to include more than these. It has been envisioned that 4D models would be part of project databases in order to take decisions related with different project dimensions.This paper presents the development and implementation of a new 4D planning tool which is a part of a product model-based project database. This tool brings the 4D simulation and cost estimation together and aims to contribute to what-if analysis in construction projects. The last part of the paper presents a case study in which the proposed prototype is evaluated.     

大截面金属镍棒的焊接工艺与实践

金属镍在电渣精炼前需用氩弧焊焊接接长,为保证焊接接头具有足够熔深,需要大参数进行焊接.采用直流焊机并联使用解决了焊机电流不足的情况,通过采取垫高镍棒端头,使接缝处于受压状态,以防止裂纹的产生.     

由碳五馏分合成甲基叔戊基醚工艺的研究

以催化裂化C_5馏分与工业甲醇为原料,D005型大孔强酸型阳离子交换树脂为催化剂,采用筒式膨胀床双反应器,考察了甲基叔戊基醚的合成工艺条件。一阶反应器的操作条件为：循环比为2：1,醇烯比为1.2：1,入口温度为70℃,空速为6 h~(-1),平均转化率为53.63%；二阶反应器的操作条件为：入口温度为50℃,空速为1.2h~(-1),平均转化率为71.32%,全调合方案可以使催化裂化汽油的辛烷值平均提高0.55个单位。     

Photocatalytic evolution of hydrogen over mesoporous TiO2 supported NiO photocatalyst prepared by single-step sol–gel process with surfactant template

Photocatalytic activity of mesoporous titania supported nickel oxide photocatalyst synthesized by single-step sol–gel (SSSG) process combined with surfactant-assisted template method was investigated for hydrogen evolution from an aqueous methanol solution, in comparison with one prepared by conventional incipient wetness impregnation (IWI) method. In single-step sol–gel process, nickel precursor was introduced into the titania sol prepared with the aid of a surfactant template behaving as pore-controlling agent to attain meso-scaled pore. The single-step sol–gel photocatalyst was experimentally found to enhance the photocatalytic evolution of hydrogen rather than the impregnated one. The optimum level of nickel loading in photocatalytic activity test for single-step sol–gel method was slightly higher than that for incipient wetness impregnation method. Characterization results demonstrated the significant modification of physical characteristics of the single-step sol–gel photocatalyst, anticipated to relating to the observation of higher photocatalytic hydrogen evolution activity.     

钒钛渣对刚玉莫来石耐火材料的侵蚀研究

通过不同温度下钒钛渣对刚玉莫来石耐火材料的侵蚀实验，分析了炉渣、温度对材料的影响，认为致密结构、低气孔率是提高炉衬寿命的关键，板条状莫来石的存在利于减缓渣的侵蚀过程。