Time stepping schemes for coupled displacement and pore pressurē analysis

 The paper investigates the performance of various time stepping schemes for coupled displacement and pore pressure analysis. A number of alternative forms of the automatic time stepping method proposed by Sloan and Abbo (1999a) are also presented. These alternative schemes use different updates for the displacements and pore pressures and also adopt different starting conditions for the iterations. The automatic schemes are compared with an implicit θ-method, as well as an explicit method, through analysis of a variety of problems involving undrained loading, drained loading, and consolidation for Mohr-Coulomb and critical state models. As expected, the numerical results confirm that the explicit scheme is neither accurate nor robust. Although the implicit θ-method is accurate and fast, it fails to give a solution in a number of cases where the time step is large. The automatic schemes are shown to be accurate, fast and generally robust. Two of the automatic schemes proposed never fail to furnish a solution for the cases considered. In addition, all the automatic schemes are able to constrain the time-stepping (temporal integration) error in the displacements and pore pressures to lie near a prescribed tolerance, provided the iteration error tolerance is properly chosen. For complex soil models, it is important that the latter is set sufficiently small in order for the schemes to be able to constrain the time-stepping error to lie within a prescribed tolerance. Dedicated to the memory of Prof. Mike Crisfield, for his cheerfulness and cooperation as a colleague and friend over many years.     

Effect of charge trapping species of cupric ions on the photocatalytic oxidation of resorcinol

The photocatalytic oxidation of resorcinol, a potent endocrine disrupting chemical, in oxygenated aqueous suspensions of pure and cupric ions modified Degussa P25 titanium dioxide has been investigated at pH 3.0 ± 0.5. The initial rate of photocatalytic oxidation of resorcinol increased until an optimum dissolved cupric ions concentration was reached at 1.04 mM. At the optimum concentration of cupric ions, the initial rate of photocatalytic mineralisation and degradation of resorcinol was improved by 400%. The observed beneficial effect of cupric ions on the initial rate of resorcinol oxidation could be attributed to the formation of complex and its participation in the photoredox cyclic reaction.Two of the initial oxidation intermediates detected were 1,2,3-trihydroxybenzene and 1,2,4-trihydroxybenzene. These intermediates were formed via hydroxylation of the aromatic ring of resorcinol. Evidences have revealed that 1,2,4-trihydroxybenzene interacted strongly with cupric ions forming copper(II)-trihydroxybenzoate complexes that possessed good adsorption onto TiO₂ surface. These dual-effects help to draw the metal ions closer to the photocatalyst surface and subsequently trigger the electron trapping mechanism by cupric ions. As a result, this improved the charge carriers’ separation. Furthermore, in the presence of oxygen, reoxidation of photoreduced cupric ions occurred and this eliminated the possibility of copper photodeposition, while inducing a photoredox cyclic reaction to regenerate copper species that may potentially act as co-catalyst for the oxidation of 1,2,4-trihydroxybenzene. In contrast, no obvious complex formation was seen between 1,2,3-trihydroxybenzene and cupric ions. This pointed to an intriguing finding which indicates that the positioning of functional group on benzene ring influences the role of cupric ions.     

Microstructural development and mechanical properties of interrupted aged Al-Mg-Si-Cu alloy

The effects of a recently developed interrupted aging procedure on the microstructural development and mechanical properties of the commercial Al-Mg-Si-Cu alloy 6061 have been studied using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and mechanical testing. This so-called T6I6 temper involves partially aging the alloy at a typical T6 temperature (the underaging stage), quenching, then holding at a reduced temperature (in this case 65 °C) to facilitate further hardening (the secondary aging stage), prior to final aging to peak properties at, or close to, the initial aging (T6) temperature (the reaging stage). The T6I6 aging treatment produces simultaneous increases in tensile properties, hardness, and toughness, as compared with conventional T6. The overall improvement in the mechanical properties of 6061 T6I6 is associated with the formation of a greater number of finer, and more densely dispersed, β″ precipitates in the final microstructure. Secondary precipitation took place during the interrupted aging stage of the T6I6 temper, resulting in the formation of a large number of Guinier-Preston (GP) zones that served as precursors to the needlelike β″ precipitates when elevated temperature aging was resumed.     

A systematic design method to obtain broadband characteristics for singly-fed electromagnetically coupled patch antennas for circular polarization

We present a systematic, empirical design technique to obtain optimum broadband impedance, axial-ratio (AR) and gain bandwidths for a singly-fed electromagnetically coupled patch antenna for circular polarization. Our investigation has also revealed tradeoffs amongst obtainable AR, impedance bandwidth and AR bandwidth. Using two design examples at different frequency bands and for different senses of circular polarization, we have demonstrated the effectiveness of the proposed knowledge-based tuning method. We have obtained at C-band measured values of impedance bandwidth (VSWR/spl les/2) equal to 43%, 3-dB AR bandwidth of 8%, AR of less than 0.3 dB and a mean gain level of 7 dB. For the Ku-band element, a 40% impedance bandwidth and a 17.3% of 3-dB AR bandwidth have been obtained with a peak gain of 7.2 dBic.     

Experimental evaluation of velocity and power estimation forultrasound blood flow imaging, by means of a two-dimensionalautocorrelation approach

This paper evaluates experimentally the performance of a novel axial velocity estimator, the 2D autocorrelator, and its Doppler power estimation counterpart, the 2D zero-lag autocorrelator, in the context of ultrasound color flow mapping. The evaluation also encompasses the well-established 1D autocorrelation technique for velocity estimation and its corresponding power estimator (1D zero-lag autocorrelator), to allow performance comparisons under identical conditions. Clutter-suppressed in vitro data sets from a steady-flow system are used to document the effect of the range gate and ensemble length, noise level and angle of insonation on the precision of the velocity estimates. The same data sets are used to examine issues related to the estimation of the Doppler signal's power. The first-order statistics of power estimates from regions corresponding to flow and noise are determined experimentally and the ability of power-based thresholding to separate flow signals from noise is characterized by means of ROC analysis. In summary, the results of the in vitro evaluation show that the proposed 2D-autocorrelation form of processing is consistently better than the corresponding 1D-autocorrelation techniques, in terms of both velocity and power estimation. Therefore, given their relatively modest implementation requirements, the 2D-autocorrelation algorithms for velocity and power estimation appear to represent a superior, yet realistic, alternative to conventional Doppler processing for color flow mapping     

Traction-based Completed Adjoint Double Layer Boundary Element Method in elasticity

This paper is concerned with a traction-based Completed Adjoint Double Layer Boundary Element Method to solve for the surface traction of a system of rigid particles embedded in an elastic matrix. The main feature of the method is a single layer representation of the displacement field, which leads to a system of second-kind integral equations for the traction field, the extreme eigenvalue of which could be deflated, allowing iterative solution strategies to be effectively applied. The method is therefore most suitable for large-scale simulations of particulate solids. The method is benchmarked against some known analytic solutions, including the difficult stress singularity problems at sharp edges. The effectiveness of the method in dealing with a large number of inclusions is also demonstrated with an elongational deformation problem involving up to 25 inclusions.Research supported by the Australian Research Council (to NP-T and X-JF) and the National Natural Science Foundation of China (X-JF).     

Dubin calls on CMPA to eliminate fee differentials, adopt flat fee for all physicians

PURPOSE: To examine vascular associations with pseudoexfoliation syndrome in view of the wide-spread elastosis now demonstrated in this disorder that affects many tissues, including vessel walls. METHODS: The Blue Mountains Eye Study is a population-based study of eye disease in an area west of Sydney, Australia. Of 4433 eligible persons aged 49 years or older, 3,654 (82.4%) participated. Signs of pseudoexfoliation were graded clinically, after excluding 108 people who had bilateral cataract surgery. RESULTS: Pseudoexfoliation was present in 81 (2.3%) of 3546 participants aged 49 years or older. The prevalence of pseudoexfoliation increased with age and was higher in women and in people with glaucoma. Pseudoexfoliation was statistically significantly associated with a history of angina or hypertension or a combined history of angina, acute myocardial infarction, or stroke. CONCLUSION: Slit-lamp signs of pseudoexfoliation may identify individuals with an increased vascular risk.     

Dynamic arrays for fast, efficient, data manipulation during image analysis: a new software tool for exploratory data analysis.

Memory reallocation is used to construct a run-time data structure for fast/efficient storage of information during collection and analysis. The data structure presented uses dynamic memory but does not require the use of pointers to link nodes of information together. It allows for simple and efficient access to data via array indexing rather than through the use of lists or tree structures and it provides flexibility for competing storage requirements that are determined dynamically. The data structure is developed in the C programming language and a suite of ANSI standard C subroutines that make up a run-time data structure management system is provided.