Experimental optimization of power-function-shaped drive pulse for stick-slip piezo actuators

Motion of a stick-slip piezo actuator is generally controlled by the parameters related to its mechanical design and characteristics of the driving pulses applied to piezoceramic shear plates. The goal of the proposed optimization method is to find the driving pulse parameters leading to the fastest and the most reliable actuator operation. In the paper the method is tested on a rotary stick-slip piezo actuating system utilized in an atomic force microscope.The optimization is based on the measurement of the actuator response to driving pulses of different shapes and repetition frequencies at various load forces. To provide it, a computer controlled testing system generating the driving pulses, and detecting and recording the corresponding angular motion response of the actuator by a position sensitive photo detector (PSPD) in real time has been developed. To better understand and interpret the experimental results, supportive methods based on a simple analytical model and numerical simulations were used as well.In this way the shapes of the single driving pulses and values of the load force providing the biggest actuator steps were determined. Generally, the maximal steps were achieved for such a combination of the pulse shapes and load forces providing high velocities at the end of the sticking mode of the actuator motion and, at the same time, lower decelerations during the slipping mode.As for the multiple driving pulses, the pulse shapes and values of repetition frequency ensuring the sticking mode of the actuator motion during the pulse rise time together with the maximum average angular rotor velocity were specified. In this way the effective and stable operation conditions of the actuator were provided.In principle, the presented method can be applied for the testing and optimization of any linear or angular stick-slip actuator.     

Preventive replacement policies with time of operations,mission durations,minimal repairs and maintenance triggering approaches

When a mission arrives at a random time and lasts for a duration, it becomes an interesting problem to plan replacement policies according to the health condition and repair history of the operating unit, as the reliability is required at mission time and no replacement can be done preventively during the mission duration. From this viewpoint, this paper proposes that effective replacement policies should be collaborative ones gathering data from time of operations, mission durations, minimal repairs and maintenance triggering approaches. We firstly discuss replacement policies with time of operations and random arrival times of mission durations, model the policies and find optimum replacement times and mission durations to minimize the expected replacement cost rates analytically. Secondly, replacement policies with minimal repairs and mission durations are discussed in a similar analytical way. Furthermore, the maintenance triggering approaches, i.e., replacement first and last, are also considered into respective replacement policies. Numerical examples are illustrated when the arrival time of the mission has a gamma distribution and the failure time of the unit has a Weibull distribution. In addition, simple case illustrations of maintaining the production system in glass factories are given based on the assumed data.     

Advanced exergy analysis of an absorption cooling machine: Effects of the difference between the condensation and absorption temperatures

The water–LiBr absorption machine was analyzed with the purpose of identifying the endogenous, exogenous, avoidable and unavoidable fractions of the exergy destruction. The latter was observed to be largely of endogenous nature, with the desorber and absorber being the major contributors. When the difference between the absorption and condensation temperatures was raised, both the first and second law efficiencies degraded. Furthermore, the absorber endogenous avoidable irreversibility was much larger than that at the desorber when the absorption temperature was lower than the condensation temperature, and the situation reversed when the absorption temperature became higher than the condensation temperature. The same trends were observed in terms of the exogenous avoidable exergy destruction. However, the endogenous unavoidable exergy destruction at the absorber was initially smaller than that at the desorber, and the two components equally contributed to the total endogenous unavoidable irreversibility when the absorption temperature became higher than the condensation temperature.     

嫦娥四号着陆点原位高光谱的太空风化研究

月球表面没有大气层的保护，岩石矿物长期在太空风化的作用下，逐渐演化为月壤。太空风化过程是月壤产生、成熟的过程，由于物质形态结构的改变，导致月表光谱特征产生变化。因而，作为风化产物的月壤的光谱特性，包含了月表的太空风化信息。月壤成熟度，是描述太空风化程度的重要指标，利用高光谱遥感数据进行亚微观铁（SMFe）的反演进而获取月壤成熟度，是目前研究月表太空风化的主要手段。原位探测数据，由于没有受到其他因素的干扰，获得的反演结果相对更加准确、可靠。我国嫦娥四号(CE-4)玉兔二号巡视器搭载了能直接获取月表原位高光谱数据（450~2395 nm）的科学载荷红外成像光谱仪，为研究月表的太空风化提供了很好的机会。选取了CE-4卫星着陆器登陆点附近的两处光谱数据，采用Hapke模型和光谱角匹配法对CE-4卫星登陆点附近月壤的SMFe进行了反演。根据Morris模型和FeO含量进一步反演CE-4卫星登陆点附近月壤的成熟度。结果表明，该处月壤成熟度为11.5，较大概率为不成熟月壤。     

Assessment of spray quality from an external mix nozzle and its impact on SQL grinding performance

Spray quality is the critical factor which decides the efficacy of Small Quantity Lubrication (SQL) technology in a high specific energy involved machining process like grinding. Yet, the understanding about spray quality, the actual process mechanics and its effect on machining performance is inadequate. The present work is an attempt to establish a correlation between the spray input variables, quality of the spray and machining performance of SQL grinding through modelling and experiments. Using computational fluid dynamic techniques, the variation of droplet size, droplet velocity, number of droplets and heat transfer coefficient have been analysed at different input parameters and the computed trends have been verified and validated. CFD modelling of spray indicates that it is possible to produce aerosol medium with high heat dissipation ability at moderately high air pressure and low flow rate. It also shows that any increase in atomising air pressure favourably leads to notable increase in wetting area and also results in substantial enhancement in heat dissipation ability. Reduction of residual stress is thus remarkably good. On the other hand, grinding fluid flow rate, if increased, offers significantly better lubricity and reduces the grinding force which also reduces tensile residual stress. Short spell grinding test results are found to be in good agreement with CFD results.     

Geothermal energy utilization trends from a technological paradigm perspective

The use of geothermal energy and its associated technologies has been increasing worldwide. However, there has been little paradigmatic research conducted in this area. This paper proposes a systematic methodology to research the development trends for the sustainable development of geothermal energy. A novel data analysis system was created to research the geothermal energy utilization trends, and a technological paradigm theory was adopted to explain the technological changes. A diffusion velocity model was used to simulate and forecast the geothermal power generation development in the diffusion phase. Simulation results showed that the development of installed capacity for geothermal generation had a strong inertia force along with the S-curve. Power generation from geothermal power sources reached a peak in 2008 and is estimated to be saturated by 2030. Geothermal energy technologies in hybrid power systems based on other renewable energy sources look to be more promising in the future.     

电子产品研制阶段可靠性增长试验研究

结合工程实际经验,深入讨论了可靠性增长过程及实现途径,在保持试验条件和改进过程不变的条件下,实施了对具体型号电子产品的可靠性增长试验,达到了预期的可靠性增长目标,并且利用可靠性增长试验的数学模型(AMSAA模型)来评估产品的可靠性增长,对开展可靠性增长与可靠性增长试验工作具有重要的实际意义.     

逆变电源并联技术

逆变器并联是提高电源系统可靠性 ,扩充系统容量的有效方式。本文介绍了逆变电源并联的原理、技术要求和特点。对当前采用的逆变电源并联方案进行了总结和分类。在此基础上详细分析了各种并联方案的特点和内在关系 ,指出了逆变电源并联技术的发展趋势。     

Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

Pool boiling of saturated FC-72 on nano-porous surface

Pool boiling heat transfer from nano-porous surface immersed in a saturated FC-72 dielectric fluid has been experimentally studied at atmospheric pressure (101 kPa). The data obtained from nano-porous surface (Anodisc 25) of thickness about 70 μm made from aluminum oxide (Al₂O₃) obtained from Whatman, were compared to that of a plain surface (aluminum) of thickness about 105 μm. From the experimental data obtained it was evident that there is a reduction of about 30% in the incipient superheat for the applied power for nano-porous surface over plain surface. SEM photographs of the nano-porous coating were taken for determining the size of the pores.