Simulation of characteristics of a SiO2/c-axis-oriented LiNbO3/diamond surface acoustic wave

High-frequency surface acoustic wave (SAW) devices based on diamond that have been realized to date utilize c-axis-oriented ZnO as the piezoelectric thin film. This material, with SiO2 overlay, shows excellent characteristics of a high phase velocity of over 10,000 m/s and a zero temperature coefficient, and it has been successfully applied to high-frequency SAW filters and resonators. To expand on materials used on diamond, the theoretical calculation has been carried out for LiNbO3/diamond, and a high electromechanical coupling coefficient up to 9.0% is expected. In this work, the characteristics of SiO2/LiNbO3/diamond were studied by computer simulation, emphasizing a zero temperature coefficient with a high coupling coefficient. Calculations are carried out for the phase velocity, the electromechanical coupling coefficient, and the temperature coefficient of the Rayleigh wave and its higher mode Sezawa wave. As a result, SiO2/IDT/LiNbO3/diamond is found to offer a zero temperature coefficient with a very high coupling coefficient up to 10.1% in conjunction with a high phase velocity of 12,100 m/s.     

Cyclic deformation behavior and dislocation structure of Ti-2 at. Pct Al single crystals oriented for double prism slip

Cyclic deformation behavior and dislocation substructure in the single crystals of Ti-Al alloy containing 2.0 pct Al (by atom) with double prism slip at different cyclic strain amplitudes were examined. The testing results showed that Ti-2Al displayed an initial slight cyclic hardening followed by a striking softening period, and a saturation stage was reached finally. Secondary cyclic hardening was observed for most specimens before failure, specifically at the high cyclic strain amplitudes. The cyclic resolved shear stress-strain curve (CSSC) was observed to contain a plateau in the testing strain range with a saturation plateau stress of about 55 MPa. Trace analysis on the surface of specimens with an optical microscope shows that the (10 0) and (1 00) double prism slips can be distinguished from the traces on the (0001) surface of the fatigued specimens. The dislocation substructure in the fatigued specimens was examined using a transmission electron microscope (TEM). The typical dislocation configuration is the saturated dislocation bundles, which are tangled on the (10 0) and (1 00) slip planes and arranged parallel to the [0001] direction.     

Summary of US–Japan Exchange 2004: New Directions and Physics for Compact Toroids

Scientists from research institutions in the United States of America and Japan attended a USA Department of Energy sponsored joint international workshop on the subject of Compact Toroids (CT) in Santa Fe, NM, USA in September 2004. We outline here a summary of the topics that were discussed, some of the implications, and new directions that are likely to follow from this research. Experimental, theoretical and computational results were presented. The experimental devices and concepts, along with the theory and computational models comprise investigations of fundamental plasma physics, fusion science, and approaches to fusion energy that require magnetized plasmas.     

Development of coincidence transmission electron microscope. III. Incorporation with gamma-type imaging energy filter

We have developed a new analytical transmission electron microscope (TEM), called coincidence TEM, which, in principle, enables observation of elemental mapping images at a high signal-to-noise ratio. We have previously reported the successful observation of an elemental mapping image of a specimen, but over a very long period of time (168 h). To solve this inefficiency, we installed a gamma-type imaging energy filter in the coincidence TEM to remove the no-loss electrons, which are mainly transmitted electrons. This has enabled the intensity of the background signals in the coincidence measurement to be markedly reduced. The coincidence TEM with a gamma-type imaging energy filter allows the coincidence image to be observed in 3 h, thus, the measurement time is shortened by two orders of magnitude. Moreover, the use of a silicon drift detector (SDD) will shorten the measurement time.     

Reconstruction of a high-resolution image on a compound-eye image-capturing system

The authors have proposed an architecture for a compact image-capturing system called TOMBO (thin observation module by bound optics), which uses compound-eye imaging for a compact hardware configuration [Appl. Opt. 40, 1806 (2001)]. The captured compound image is decomposed into a set of unit images, then the pixels in the unit images are processed with digital processing to retrieve the target image. A new method for high-resolution image reconstruction, called a pixel rearrange method, is proposed. The relation between the target object and the captured signals is estimated and utilized to rearrange the original pixel information. Experimental results show the effectiveness of the proposed method. In the experimental TOMBO system, the resolution obtained is four times higher than that of the unit image that did not undergo reconstruction processing.     

Polarization response of two-dimensional metallic photonic crystals studied by terahertz time-domain spectroscopy

The polarization characteristics of a terahertz (THz) wave transmitted through two-dimensional (2-D) metallic photonic crystals (MPCs) are investigated. The 2-D MPCs studied in this paper are metal slabs perforated periodically with circular holes. We measured the polarization characteristics of the THz wave using a THz time-domain spectroscopic system with wire grid polarizers in the time and frequency domains. The linearly polarized incident THz wave changes its polarization direction and becomes elliptic after it transmits through the sample. This phenomenon is highly sensitive to the incident angle. It is shown that the frequency range at which the polarization rotation occurs is related to the lattice constant of a photonic crystal, indicating the importance of photonic band modes of the 2-D MPC in the mechanism of the phenomenon.     

Spectroscopic studies on the rare-earth vanadites

The nature of the V/1bO/1bV interaction of the perovskite type rare-earth vanadites were studied by spectroscopic methods. Infrared and ultraviolet analyses revealed that the V/1bO bond length became shorter and that the V/1bO bond strength increased, as a function of the atomic number of lanthanide elements in LnVO₃. Judging from the x-ray fluorescent spectra of oxygen-K_α, the energy level of O^2? (p_π) orbitals of the heavier rare-earth vanadites was lower than that of the lighter rare-earth vanadites.     

The evaporation and carburization behavior of coated systems of niobium on molybdenum and niobium on titanium

The evaporation, carburization and diffusion behavior of Nb-coated Mo and of Nb-coated Ti were investigated in order to estimate the surface characteristics of the coated systems. Nb layers were formed on Mo by both chemical and physical vapor deposition and on Ti by just physical vapor deposition. From the diffusion behavior, interdiffusion coefficients were obtained at 1860°C, 1980°C and 2080°C for the chemically vapor-deposited Nb/Mo system. From evaporation experiments it was found that simultaneous evaporation of Nb and Mo occured at about 2300°C for thick films of Nb on Mo. For thin films of Nb on Mo, the evaporation of both Nb and Mo was confirmed at 1900°C by ion microprobe analysis of the condensate. For Nb/Ti, rapid diffusion of Nb into Ti and evaporation of Ti similar to the case of Nb-Ti alloys were observed. From the carburization study, it was found that an Nb coating appreciably retards the carburization of Ti and Mo.