Frequency-hopped ARQ for wireless network data services

The throughput efficiency and probability of undetected error of automatic-repeat-request (ARQ) protocols employing slow frequency hopping over Gilbert-Elliott (1960, 1963) fading channels are investigated. Throughput efficiency formulas for the three basic ARQ schemes, “stop-and-wait” (SW), “go-back-N” (GBN), and “selective-repeat” (SR), are obtained, and the improvement in throughput efficiency due to slow frequency hopping is examined. Results are also presented on the problem of determining the number of carriers used for frequency hopping so as to minimize the effect of fading channel memory and, therefore, optimize system performance. This work has application to TDMA architectures and packet data services for third generation wireless networks, where projected data service requirements call for error rates on the order of 10^-9 , and the multiple service, multiple access environment demands that the delay for any service be minimized     

On the VLSI implementation of real-time order statistic filters

Real-time implementation of an order-statistic filter (OSF) or ranked order filter requires the computation of the order statistic (ranked order) of the samples in a window which gets periodically updated with the arrival of a new sample(s). The authors give an algorithm for the computation of the running order statistic. A highly parallel architecture suitable for VLSI implementation is presented. The architecture is very versatile, with programmable window size and rank order. An expansion algorithm and its VLSI architecture, which permit the usage of two r-bit OSFs to implement an (r+1)-bit OSF, where r is the resolution of the input signal samples, are given. In a special case where one is satisfied with at most one LSB error, the hardware complexity of the proposed architecture can be reduced by almost one half. It is further shown how a VLSI chip incorporating the proposed architecture can be used as the basic building block in the real-time implementation of other forms of nonlinear filters     

Lateral-mode analysis of narrow-stripe semiconductor lasers with acylindrically concave end facet

A beam-propagation method is used to investigate numerically the lateral-mode characteristics of GaAlAs semiconductor lasers having a cylindrically concave facet at one end. Various degrees of index guiding have been considered. Simulations were made for both below- and above-threshold regimes. As expected, the numerical results show that the optical beam divergence parallel to the junction plane can be significantly reduced. In addition, this far-field narrowing is accompanied by lower threshold currents. However, for values of the radius of curvature of the concave facet lying in some specific ranges, the losses of the fundamental lateral mode are higher than that calculated for conventional lasers, and the corresponding eigenvalue shows nonmonotonic variations as the injection current is increased. This phenomenon is due to an enhancement of the index antiguiding over the gain-guiding mechanism     

Optically pumped rubidium as a frequency standard at 196 THz

The performance of 196.0-THz (1529-nm) DFB lasers frequency-locked to absorption lines of a rubidium vapor optically pumped at 384.2 THz (780.2 nm) is studied. The absorption profiles of the pumped vapor are measured under various conditions and compared with theoretical predictions. A bright resonance resulting from the cascade of two cycling transitions is characterized both experimentally and theoretically. The measured frequency stability of a DFB laser frequency-locked to this line reaches a level of 2×10^-10 for an averaging time of 100 s when compared to a similar laser locked to an acetylene line     

A fluidelastic model for the dynamics of cantilevered plates with an additional spring support in axial flow

A fluidelastic model has been developed for studying the dynamics of cantilevered plates in axial flow, with an additional spring support at the plate trailing edge. The plate is supposed to be two-dimensional; a nonlinear equation of motion based on the inextensibility condition is used to account for the possible large vibration amplitude. For the fluid-dynamic part, an unsteady lumped vortex model is used for calculating the fluid loads acting on the plate undergoing deformation; the longitudinal displacement of the plate associated with lateral motions is also taken into account. The fluidelastic model is first validated through comparisons with experimental data published for systems without the spring support; it is then used to investigate the dynamics of cantilevered plates in axial flow with an additional spring support at the plate trailing edge. Some interesting results of the dynamics of the fluid–structure system are presented.     

A finite element model for radiofrequency ablation of themyocardium

A finite element model was developed to simulate the temperature distributions produced by radiofrequency catheter ablation. This model incorporated blood, myocardium and torso tissues. The Laplace equation was solved to determine the steady-state electric field. The heat generation in the tissues was then computed from the power density distribution and the bioheat equation was solved to determine the time-varying temperature distribution, taking into account the convective energy exchange at the blood-myocardium and torso-air interfaces. This model was used to predict the lesion depth and to evaluate the effects of electrode location, changes of the electrical and thermal conductivities, and the electrode radius on the thermally induced damage to the myocardium. Temperature distributions induced by radiofrequency ablation were found to be: i) not very sensitive to the reference electrode location, ii) more sensitive to electrical conductivity changes than to thermal conductivity changes, and iii) larger electrodes allow a current distribution at higher level of power with reducing the chance of impedance rise     

Ultrasonic thin-walled tube wave structure for sensing devices

Theoretical and experimental investigations of thin-walled tube acoustic wave devices for gravimetric sensing applications are presented. Integrated sensor configurations have been demonstrated by employing a sol-gel processed thin piezoelectric lead zirconate titanate (PZT) film. This was coated coaxially on stainless steel tubes and interdigital transducers (IDT) fabricated as the transmitter and receiver on the curved tube surfaces. We have observed tube waves along both the axial and circumferential directions between 1 and 6.6 MHz. We have also analyzed the mass sensitivities of different modes propagating along the tubes and shown that high mass sensitivity can be achieved by keeping the tube wall thin     

A new approach to version control

A method for controlling versions of software and other hierarchically structured entities is presented. Using the variant structure principle, a particular version of an entire system is formed by combining the most relevant existing versions of the various components of the system. An algebraic version language that allows histories (numbered series), subversions (or variants), and joins is described. It is shown that the join operation is simply the lattice least upper bound and together with the variant structure principle, provides a systematic framework for recombining divergent variants. The utility of this approach is demonstrated using LEMUR, a programming environment for modular C programs, which was developed using itself. The ways in which this notion of versions is related to the possible world semantics of intensional logic are discussed     

Infant leukaemia biology, aetiology and treatment

A method for the determination of aspartame (N-L-alpha-aspartyl-L-phenylalanine methyl ester) and its metabolites, applicable on a routine quality assurance basis, is described. Liquid samples (diet Coke, 7-Up, Pepsi, etc.) were injected directly onto a mini-cartridge reversed-phase column on a high-performance liquid chromatographic system, whereas solid samples (Equal, hot chocolate powder, pudding, etc.) were extracted with water. Optimising chromatographic conditions resulted in resolved components of interest within 12 min. The by-products were confirmed by mass spectrometry. Although the method was developed on a two-pump HPLC system fitted with a diode-array detector, it is straightforward and can be transformed to the simplest HPLC configuration. Using a single-piston pump (with damper), a fixed-wavelength detector and a recorder/integrator, the degradation of products can be monitored as they decompose. The results obtained were in harmony with previously reported tedious methods. The method is simple, rapid, quantitative and does not involve complex, hazardous or toxic chemistry.     

Effect of oil viscosity on transformer loading capability at lowambient temperatures

The applicability of the ANSI loading guide for power transformers is limited to ambient temperatures above 0°C because the thermal model does not account for variations in the oil viscosity and winding resistance. A practical calculation method based on the bottom-oil temperature and the surface temperature at the top of the cooling duct has been developed. Results indicate that the proposed thermal model could provide a sound basis for calculating the overload capacity for ambient temperatures below 0°C or for severe overloads of short duration