Efficient use of route requests for loop-free on-demand routing in ad hoc networks

On-demand routing protocols flood a route request (RREQ) identified by a unique source-sequenced label (SSL) to build directed acyclic graphs (DAG) consisting of possible paths to destinations, and use reverse paths along such DAGs to send route replies from the destinations. We present the first framework that uses only the SSL of the RREQ to establish loop-free paths without requiring additional mechanisms or information, e.g., per destination-sequence numbers or source routing. We present the Labeled Successor Routing (LSR) protocol, which stores the SSL of the RREQ as a route request label (RRL) at the nodes that participated in the creation of the RREQ DAG. The RRLs allow the source of the RREQ to identify neighbors as loop-free successors to the destination, which reduces network-wide RREQ flooding. Simulations results for scenarios consisting of networks of 50 and 100 mobile nodes show that LSR performs comparably or better than the Dynamic Source Routing (DSR) protocol, the Ad hoc On-demand Distance Vector (AODV) routing protocol, and the Optimized Link State Routing (OLSR) protocol.     

A collapsing bubble-induced micropump: An experimental study

It is well known that a jet develops in a (non-equilibrium) oscillating bubble near a solid wall. The jet is directed towards the wall and is usually of very high speed (∼100 m/s). Some experiments with a pump based on this principle using a bubble near a plate with a small hole in it are presented. The basic principle of this pump with no moving parts was illustrated numerically in a previous work, but without any experimental data for verification. The hole in the wall is made at the location where the jet would have impacted and thus transport liquid from one side of the plate to the other side. Various experimental results with different conditions are shown. The distance between the bubble and the wall and the diameter of the hole in the wall are the main varying parameters. Our findings indicate the effectiveness of the pumping action for a wide range of flow conditions and parameters. A distinct advantage of this collapsing bubble-induced micropump is that there are no moving parts and the response time of the pump is very fast (milliseconds or below).     

Effectiveness of new silica fume alkali activator

The effectiveness of a new type of alkali activator is studied. The activator is a product of silica fume. The results obtained showed the silica fume activator as a highly effective substance for the alkali activation of the combinations of Portland cement, silica fume and blast furnace slag, and slag alone. The positive effect of activator is based on the intensification of the production of calcium silicate hydrates and the densifying of the forming pore structure of the activated binder.     

Models for the determination of kinetic phase diagrams and kinetic phase separation domains

Several theoretical models for the determination of kinetic phase diagrams for solid solution growth from the liquid phase are presented and compared to each other. These models include a Monte Carlo simulation model, used as a reference model, a previously defined analytical model, based on linear non-equilibrium thermodynamics, and a new model, rooted in the kinetics at kink sites.All models have in common that the composition of the growing solid phase tends to the liquid phase composition for increasing undercooling, enhancing mixing even for systems with a strong tendency to phase separation. However, depending on the system parameters considerable quantitative differences can occur between the results from the model based on non-equilibrium thermodynamics and the MC model. Instead, the new model follows very well the trends of the MC simulations, both for well-mixing systems and for phase separating systems.For phase separating systems the analytical models predict kinetic phase separation domains, zones in the kinetic phase diagram yielding steady state growth of more than one solid phase with different compositions. According to MC simulations such domains in phase space correspond to domain formation in real space. Also in this case the new model is consistent with the MC results.     

Fractional alpha stable network traffic model and its application in QoS routing

It is not a simple and trivial work to set up an appropriate network traffic model. A fractional Alpha model is proposed in this paper and two proofs based on flow and session level, respectively, are given. Based on this model, the lower bound for the residual of the queueing distribution is deduced. Comparing the residual distribution function (RDF) based on our model with it based on other models, we find our formula matches the real RDF better. Based on this formula, we can predict the need for forwarding performance. Then a novel QoS routing algorithm based on this prediction is proposed. Last we demonstrate a simple example to denote how our algorithm can effectively improve the utility of bandwidth and amount of traffic and guarantee QoS.     

Circulation rates of boiling liquids in a vertical tube

An experimental study of heat transfer to boiling liquids under natural convective flow has been carried out in a single tube vertical thermosiphon reboiler to investigate the effect of heat flux and submergence on circulation rates. The test liquids used were distilled water, various concentrations of propan-2-ol in water and their azeotrope. The test section was an electrically heated stainless steel tube of 25.56 mm i.d., 28.85 mm o.d. and 1900 mm long with twenty-one spot welded copper constantan thermocouples to measure the variations in wall temperature along its axis. The uniform heat fluxes in the range of 3.5–42.4 kW/m² were employed while inlet liquid sub-cooling varied from 0.2 to 30.7 °C. The liquid submergence levels were maintained in the range 30–100%. The typical experimental data has been graphically presented and discussed. An empirical correlation has been developed from the experimental data of the present study through regression analysis.     

Templated titania films with meso- and macroporosities

Porous TiO₂ films with both mesoporosity and macroporosity were fabricated by a templated sol–gel method for applications, such as dye-sensitized solar cells (DSC), photocatalysis and catalysis. With the incorporation of differently sized pores, the resultant structures exhibit high surface areas and possess interpenetrating aligned pore channels, which are believed to be beneficial for applications where diffusion of reactants to interior surface can be rate limiting. Both liquid and solid TiO₂ precursors can be applied for large area coating in this process. Almost crack-free films were produced by templated coating of pre-synthesized TiO₂ nanoparticles. The measured specific surface area and porosity of synthesized films were in the range of 33–137 m²/g and 61–80%, respectively, depending on the size of the selected template.     

Bonelike apatite formation on carbon microspheres

Carbon microspheres with a diameter of 2 μm were prepared by hydrothermal process. The apatite-formation ability of the carbon microspheres was evaluated by soaking them in a simulated body fluid (SBF) for 5 and 10 d and apatite-formation mechanism was also analyzed. The result showed that bonelike apatite was formed on the surface of carbon microspheres. Our study indicates that the carbon microspheres synthesized by this method possess apatite-formation ability and may be used as a bioactive injectable filler for bone tissue regeneration.     

The effect of zirconium addition on the microstructure and properties of chopped carbon fiber/carbon composites

Carbon/carbon composites containing zirconium were prepared using chopped carbon fiber, mesophase pitch and Zr powder by the traditional process including molding, carbonization, densification and graphitization. The influence of Zr on the microstructure and properties of the composites were investigated. Results show that Zr can improve the interface bonding, promote more perfect and larger crystallites and enhance the conductive/mechanical properties of the composites. The high in-plane thermal conductivity of 464 W/(m K) and excellent bending strength of 83.6 MPa was obtained for a Zr content of 13.9 wt% at heat treatment temperature(HTT) of 2500 °C. However the conductive/mechanical properties of the composites decrease dramatically for an higher HTT of 3000 °C. SEM micrograph of the fracture surface for the composites shows that lower disorder crystallite arrangement of fiber and carbon matrix come into being in the composites during HTT of 3000 °C, which should be responsible for the low properties. Correlation between the content of Zr and the microstructure and properties are discussed.