Multi-walled carbon nanotube-filled polyvinyl chloride composites: Influence of processing method on dispersion quality,electrical conductivity and mechanical properties

The influences of dispersion quality and processing conditions on the electrical and mechanical properties of multi-walled carbon nanotube-filled polyvinyl chloride (MWCNT/PVC) composites are examined for potential use in sensor-enabled geosynthetics and other applications involving electrically-conductive polymer composites. Electrical conductivity and mechanical properties of the composite samples made using four different dispersion methods (i.e. probe sonication, bath sonication, mechanical stirring and batch mixing) are measured. Subsurface dispersion in the samples is quantified using laser scanning confocal microscopy and scanning electron microscopy, indicating that MWCNT bundle volumes resulting from all dispersion methods had a log-normal distribution. Dispersion qualities using different mixing methods are compared using the Kolmogorov–Smirnov D-statistic. Findings indicate that samples with higher dispersion quality exhibit greater ultimate strength and failure strain, whereas poorly-dispersed specimens have greater elastic modulus values, which are found to be in good agreement with those predicted by the Halpin–Tsai model.     

Spherulitic formation and characterization of partially fluorinated copolymers and their nanohybrids with functional fillers

Poly[vinylidenefluoride‐co‐(tetrafluoroethylene)] (P(VDF‐TeFE)) exhibited clear spherulitic texture with negative birefringence. The number and growth rates of the spherulites decreased at high crystallization temperature than at low crystallization temperature. Nonetheless, overall larger spherulites were found at high crystallization temperature and the brightness of the spherulites increased very fast at low crystallization temperature, thereafter it seemed as diminution of birefringence. AFM was used to investigate the impact of organo modified nanodiamond(ND) on spherulitic textures, lamellar thickness, and thickness distribution of P(VDF‐TeFE) copolymer. Poly[ethylene‐co‐(tetrafluoroethylene)] (ETFE) also confirmed spherulites structure and the boundaries could be clearly observed. By incorporation of the organo modified nanodiamond (ND) and organo‐modified montmorillonite (MMT) in fluropolymer matrix, it was found that spherulitic texture was seriously disordered and their nanohybrids was found only to have poorly developed spherulite structure. Both of the nanohybrids samples show better crystallization temperature as compared to their neat copolymer samples. Furthermore, the incorporation of nanoparticles decreased the size of the spherulites. POLYM. ENG. SCI., 57:161–171, 2017. © 2016 Society of Plastics Engineers     

Development of Selective TGR5 Ligands Based on the 5,6,7,8-Tetrahydro-5,5,8,8-tetramethylnaphthalene Skeleton

TGR5, a G-protein-coupled receptor (GPCR), plays an important role in several physiological functions. TGR5 activation through bile acids induces an increase in energy expenditure. Therefore, synthetic TGR5 ligands could be useful for the treatment of obesity or dyslipidemia. In this study, we designed and synthesized a set of TGR5 ligands with a 5,6,7,8-tetrahydro-5,5,8,8-tetramethylnaphthalene (TMN) skeleton, and evaluated their TGR5 agonistic activity. We also investigated the selectivity of the synthesized compounds for TGR5 relative to the farnesoid X receptor (FXR) and retinoic acid receptor (RAR). Our results show that compound 4 b [N-(2-chlorophenyl)-5,6,7,8-tetrahydro-5,5,8,8-tetramethyl-2-naphthalenecarboxamide] exhibited potent TGR5 agonist activity with an IC₅₀ value of 8.4 nM without significant cytotoxicity. In addition, compound 4 b showed only slight agonistic activity toward FXR and RAR at 1 μM treatment. These data indicate that compound 4 b is a selective TGR5 agonist, and could be a promising therapeutic agent for dyslipidemia.     

Design and characterization of compact proton exchange membrane water electrolyzer for component evaluation test

In this study, we designed and developed a compact electrolyzer for the evaluation of components in proton exchange membrane (PEM) water electrolysis. First, this electrolyzer features a precise pressure-control system that controls the active electrode area and facilitates setting the desired clamping pressure. This mechanism makes it possible to optimize the electrolyzer performance. Second, it has two reference electrodes that are connected on the faces of the active electrode area of the anode and the cathode on the PEM. The polarizations at the anode and the cathode, the membrane resistivity, and the porous transport layer (PTL) overpotential were measured. The details of the design are described, and the electrochemical performance was measured. The optimized clamping pressure for this electrolyzer component was obtained as the specific value. A new measurement method was developed for estimating polarizations at the anode and the cathode, membrane resistance, and PTL overpotential using two reference electrodes.     

Possibility of Japanese Cedar Pollen Causing False Positives in the Deep Mycosis Test

Because Japanese cedar pollen (JCP) contains beta-1,3-d-glucan (BG), there is concern that its lingering presence in the atmosphere, especially during its scattering period, may cause false positives in the factor-G-based Limulus amebocyte lysate (LAL) assay used to test for deep mycosis (i.e., G-test). Hence, we examined whether the LAL assay would react positively with substances contained in JCP by using the G-test to measure JCP particles and extracts. BG was purified from the JCP extract on a BG-specific affinity column, and the percentage extractability was measured using three different BG-specific quantitative methods. The G-test detected 0.4 pg BG in a single JCP particle and 10 fg from a single particle in the extract. The percentage extractability of JCP-derived BG was not significantly different among the three quantitative methods. As the JCP particles should technically have been removed during serum separation, they should be less likely to be a direct false-positive factor. However, given that the LAL-assay-positive substances in the JCP extract were not distinguishable by the three BG-specific quantitative methods, we conclude that they may cause the background to rise. Therefore, in Japan false positives arising from JCP contamination should be considered when testing patients for deep mycosis.     

Long-term consolidation behavior interpreted with isotache concept for worldwide clays

The consolidation characteristics interpreted with the isotache concept have been studied by many researchers, including the authors. The aim of most of these studies has been to calculate secondary consolidation with high accuracy in order to evaluate the long-term settlement of large-scale structures. In a previous study, the long-term consolidation characteristics of Osaka Bay clay, collected from the construction site of the Kansai International Airport, were examined, and a simplified method based on the isotache concept, using a compression curve and the relationship between the consolidation yield stress (preconsolidation pressure) and the strain rate, was proposed. The former and the latter were obtained from constant rate of strain consolidation (CRS) tests and long-term consolidation (LT) tests, respectively. The latter is expressed by an equation with three isotache parameters. In addition, it is noteworthy that the isotache parameters can be commonly determined for the Osaka Bay clays retrieved from various depths up to 300 m below the seabed. In the present study, the proposed method was applied to worldwide clays with various characteristics using the common values for the isotache parameters determined for the Osaka Bay clays. It was found that the long-term consolidation behavior of those worldwide clays can be well characterized by the proposed method, along with the common values for the isotache parameters.     

Trend Curve Optimal Control Model for Optimizing Pavement Maintenance Strategies Consisting of Various Treatments

Abstract: Most literature on pavement maintenance optimization for the case of continuous time assumes only one type of maintenance treatment, such as overlay, to be applicable and demonstrates solution procedures with simple cases of limited scopes. However, as overlays may not always be appropriate, depending on traffic loading/pavement situations, the objective of this article is to propose an optimization approach based on the trend curve optimal control model, to obtain optimal strategies possibly consisting of overlay, resealing, and reconstruction. The applicability of the solution procedure is demonstrated with several cases representing a variety of traffic loading/pavement situations. The solutions indicate that an optimal maintenance strategy can consist of multiple types of treatments depending on the situation, illustrating the versatility of the proposed procedure.     

DLTS characterization of defects in GaN induced by electron beam exposure

The deep level transient spectroscopy (DLTS) technique was used to investigate the effects of electron beam exposure (EBE) on n-GaN. A defect with activation energy of 0.12 eV and capture cross section of 8.0×10^–16 cm² was induced by the exposure. The defect was similar to defects induced by other irradiation techniques such as proton, electron, and gamma irradiation. In comparison to GaN, the EBE induced defects in other materials such as Si and SiC are similar to those induced by other irradiation methods.     

Electron Holography Studies on Narrow Magnetic Domain Walls Observed in a Heusler Alloy Ni50Mn25Al12.5Ga12.5

Peculiar magnetic domain walls produced in Heusler alloys, which have attracted renewed interest due to their potential application to actuators and spintronic devices, are studied here using electron holography. The observations reveal unexpectedly narrow magnetic domain walls, the width of which showed perfect agreement with that of the antiphase boundaries (APB, e.g., only 3 nm). While the results can be explained by the significant depression of ferromagnetism due to the local chemical disorder, the electron phase shift indicates that ferromagnetic correlation still remains in the APB region.     

Modelling pedestrian merging in stair evacuation in multi-purpose buildings

Despite the total evacuation time of occupants in a multi-storey building not being affected by pedestrian merging on stairs, the calculation of evacuation times in each individual floor depends on the pedestrian merging ratio. In fact, different merging ratios may cause an evacuation to take place from the top to the bottom or vice versa. A simplified simulation model for the calculation of evacuation time at each floor is presented here. This model allows the investigation of the impact of two main variables affecting the evacuation time at each floor, namely 1) different initial numbers of pedestrians at each floor (i.e. occupant load), and 2) different merging ratios at each floor. This means that the model allows the calculation of the evacuation time at each floor considering a building with different occupancy types at different floors (e.g. office, residential, commercial, etc.) and different merging ratios which may be caused by a different configuration of the landing door at each floor. The model is presented in this paper using a case study of a hypothetical building. A detailed discussion on the model assumptions, advantages and limitations is also provided.