Modification of mesophase pitch by blending Part 2 Modification of mesophase pitch fibre precursor with thermoresisting polyphenyleneoxide (PPO)

Polyphenyleneoxide was blended in amounts of 5 or 10 wt% into petroleum-derived mesophase pitch to reinforce the pitch fibre before the oxidative stabilization to achieve better handling properties. Although polyphenyleneoxide was fusible but hardly soluble in the mesophase pitch even at a spinning temperature of 350° C, blended pitch could be smoothly spun into pitch fibre 10m diameter, as could the parent pitch. Fibrous polyphenyleneoxide of less than 1m diameter was homogeneously dispersed in the pitch fibre, being arranged along the fibre axis. Such fibrous polyp henyleneoxide reinforced the pitch fibre considerably. The fibrous substances at the centre of the fibre disappeared in the carbonized fibre at 1300° C after oxidation at 250° C, although some short ones were observed in the skin region of the fibre, suggesting that polyphenyleneoxide was co-carbonized to be assimilated with mesophase pitch at the centre of the fibre, where the effects of oxidation may be rather limited. The oxidation reactivity and its mechanical strength after carbonization were slightly lower in comparison with those of the parent mesophase pitch.     

用微机图象法对脉冲MAG焊接熔池进行观察和控制的研究

本文对微机图象法在脉冲MAG焊接中的应用作了探讨,设计和采用了带有CCD摄象机的微机控制系统,对脉冲MAG焊接熔池进行了观察、监控和图象处理。其结果证明了采用微机图象法来实现实时控制是可行的。     

Fabrication of TiO2 composite materials for air purification by magnetic field effect and electrocodeposition

Novel air purification materials were fabricated by the application of a magnetic field. In a magnetic field perpendicular to a copper plate, nickel particles with a diameter of 10 m were arranged to form numerous pillar-like structures on the matrix surface, and copper as a binder was deposited onto the three-dimensional surface. The total surface area of the pillars and the matrix increased with the magnetic flux density, up to about 800 cm² per cm² of the original matrix surface at 6.2 T. After successful codeposition of TiO₂ particles on the fabricated materials by electroplating, their photocatalytic activities were evaluated on the basis of the removal efficiency of nitrogen oxides (NO _x ), which are some of the most hazardous air pollutants. It was concluded that the samples with the pillar-like structures had two opposite characteristics: large surface area as a positive effect and shadowing against ultraviolet (UV) irradiation as a negative effect. However, total photocatalytic activity increased to twice as much as that of the flat sample by improving the UV irradiation method and the preparation condition of the materials     

Reasons for bottlenecks in very large-scale system of systems development

ContextSystem of systems (SoS) is a set or arrangement of systems that results when independent and useful systems are to be incorporated into a larger system that delivers unique capabilities. Our investigation showed that the development life cycle (i.e. the activities transforming requirements into design, code, test cases, and releases) in SoS is more prone to bottlenecks in comparison to single systems.ObjectiveThe objective of the research is to identify reasons for bottlenecks in SoS, prioritize their significance according to their effect on bottlenecks, and compare them with respect to different roles and different perspectives, i.e. SoS view (concerned with integration of systems), and systems view (concerned with system development and delivery).MethodThe research method used is a case study at Ericsson AB.ResultsResults show that the most significant reasons for bottlenecks are related to requirements engineering. All the different roles agree on the significance of requirements related factors. However, there are also disagreements between the roles, in particular with respect to quality related reasons. Quality related hinders are primarily observed and highly prioritized by quality assurance responsibles. Furthermore, SoS view and system view perceive different hinders, and prioritize them differently.ConclusionWe conclude that solutions for requirements engineering in SoS context are needed, quality awareness in the organization has to be achieved end to end, and views between SoS and system view need to be aligned to avoid sub optimization in improvements.     

Trap Levels in Eu-Doped SrAl2O4 Phosphor Crystals Co-Doped with Rare-Earth Elements

SrAl₂O₄:Eu²⁺ phosphor crystals co-doped with auxiliary activators such as La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, or Y have been grown by the floating zone (FZ) technique. Photoluminescence spectrum (PL), time-resolved PL, and thermally stimulated luminescence (TSL) are evaluated to clarify the long-duration phosphorescence mechanism of SrAl₂O₄, Eu, and Ln phosphors. TSL spectra were measured in the temperature range from RT to 600 K to evaluate the depth and densities of the traps generated by the doping of auxiliary activators that are responsible for the long-duration phosphorescence. The peak wavelength of PL does not vary with auxiliary activator elements, while decay curves vary greatly with the auxiliary activators. The trap depth and the densities of the trapped carriers estimated based on the hole trap model also vary with the auxiliary activator elements. The traps generated at around E =0.5 eV by the auxiliary activators, Nd, Dy, and Tm, with sufficient densities are effective for the long-duration phosphorescence.     

Influence of Metal Ions on the Order-Disorder Transition Temperature of the Ba-M-O (M: La, Y, In, or Ga) System

Preparation of BaLa₂O₄, B_a3,Y₄O₉, B_a,In₂O₅, and Ba₃Ga₂O₆ powders and their sintering were investigated in Ar or air. These sintered bodies with perovskite-related structure were synthesized by reaction sintering, using mixed powders in the atomic ratios of Ba/La = 1, Ba/Y = 0.75, Ba/In = 1, and Ba/Ga = 1.5. The order-disorder transition temperatures of the BaLa₂O₄, Ba₃Y₄O₉, Ba₂In₂O₅, and Ba₃Ga₂O₆ sintered bodies were 270°, 350°, 880°, and 123O^oC, respectively. It was found that the temperatures were influenced by the ionic radius of cations in B sites, and the transition temperatures decreased with increasing ionic radius.     

Design of High-Quality Pt–CeO2 Composite Anodes Supported by Carbon Black for Direct Methanol Fuel Cell Application

A Pt on nano-sized CeO₂ particles that in turn are supported on carbon black (CB) was synthesized using the co-impregnation method. This potential anode material for fuel cell applications was synthesized in a stepwise process. The pure CeO₂ was synthesized using an ammonium carbonate precipitation method, and the Pt particles dispersed on the CeO₂ in such a way that a uniform dispersion with the CB was obtained (Pt–CeO₂/CB). The electrochemical activity of the methanol (CH₃OH) oxidation reaction on the Pt–CeO₂/CB was investigated using cyclic voltammetry and chronoamperometry experimentation. The onset potential of CH₃OH oxidation reaction on the Pt–CeO₂/CB anode was shifted to a lower potential as compared with that on commercially available Pt–Ru/carbon (C) alloy anode. In addition, the activation energy of the Pt–CeO₂/CB anode was much lower than that of the Pt–Ru/C alloy anode. Moreover, the current density of the Pt–CeO₂/CB anode was much higher than that of the Pt–Ru/C alloy anode at temperatures between 28° and 60°C. These results suggest that the anode performance of the Pt–CeO₂/CB anode at the operating temperature of typical fuel cells (80°C) is superior to that of the more usual Pt–Ru/C alloy anode. Importantly, the rare metal, Ru, is not required in the present anode material and the amount of Pt required is also significantly reduced. As a consequence, we report a promising candidate Pt–CeO₂/CB composite anode for application in the development of direct methanol fuel cells.     

Hydrogen adsorption and hydrogen evolution reaction on a polycrystalline Pt electrode studied by surface-enhanced infrared absorption spectroscopy

Hydrogen evolution reaction (HER) on a polycrystalline Pt electrode has been investigated in Ar-purged acids by surface-enhanced infrared absorption spectroscopy and electrochemical kinetic analysis (Tafel plot). A vibrational mode characteristic to H atom adsorbed at atop sites (terminal H) was observed at 2080-2095 cm⁻¹. This band appears at 0.1 V (RHE) and grows at more negative potentials in parallel to the increase in hydrogen evolution current. Good signal-to-noise ratio of the spectra enabled us to establish the quantitative relation between the band intensity (equivalently, coverage) of terminal H and the kinetics of HER, from which we conclude that terminal H atom is the reaction intermediate in HER and the recombination of two terminal H atoms is the rate-determining step. The quantitative analysis of the infrared data also revealed that the adsorption of terminal H follows the Frumkin isotherm with repulsive interaction.     

Thermal modulation of intracellular drug distribution using thermoresponsive polymeric micelles

Intracellular distribution of free doxorubicin (DOX) or DOX-loaded in polymeric micelles with thermoresponsive outer shells of poly(N-isopropylacrylamide) or its copolymers in cultured human breast cancer cells (MCF-7) were investigated by fluorescence and confocal laser scanning microscopy. Free DOX accumulated rapidly and selectively in cell nuclei, independent of temperature changes. In contrast to free drugs, the intracellular distribution of DOX-loaded in the thermoresponsive polymeric micelles was significantly affected by temperature changes across lower critical solution temperature (LCST) of the micelles. Above the micelle LCST, DOX delivered by the micelles was localized uniformly inside of MCF-7 cells. By contrast, the amount of DOX delivered to MCF-7 cells drastically decreased below the micelle LCST due to minimal interaction of the micelles with cell membrane surfaces. These results clearly showed that the mechanism of the intracellular drug localization was different between free drugs and DOX-loaded in the micelles. The thermoresponsive micelles aggressively interacted with the cells and carried DOX into the cells via triggered phase transition of the outer shells. In addition, much lower accumulation of free DOX was observed in the resistant cells compared to its parent sensitive MCF-7 due to the resistant mechanism. Of interest, DOX accumulation in the resistant cells was almost in the same level as with MCF-7 (sensitive) cells for the micelle system above the LCST.     

Structural Study on PbO–SiO2 Glasses by X-Ray and Neutron Diffraction and 29Si MAS NMR Measurements

Structure of x PbO–(100− x )SiO₂ ( x =25–89) glasses has been investigated by means of the X-ray and neutron diffraction and ²⁹Si MAS NMR measurements. In the radial distribution functions of all the glasses, the Pb–O correlation was observed at 0.23 nm, indicating that the PbO₃ trigonal pyramids units do exist in the whole glass forming composition range. Furthermore the existence of the first Pb–Pb correlation at ∼0.385 nm in the whole composition range suggests that the basic structural unit is considered to be a Pb₂O₄ unit, which consists of the edge-shared PbO₃ trigonal pyramids. These results strongly imply that the Pb₂O₄ units participate in the glass network constructed by SiO₄ tetrahedra even at low PbO content. Differing from other lead-containing glass systems, these structural characteristics of Pb ions in the PbO–SiO₂ glass system are responsible for the extremely wide glass-forming region.