Energy-optimal base station density in cellular access networks with sleep modes

Sleep modes are widely accepted as an effective technique for energy-efficient networking: by adequately putting to sleep and waking up network resources according to traffic demands, a proportionality between energy consumption and network utilization can be approached, with important reductions in energy consumption. Previous studies have investigated and evaluated sleep modes for wireless access networks, computing variable percentages of energy savings. In this paper we characterize the maximum energy saving that can be achieved in a cellular wireless access network under a given performance constraint. In particular, our approach allows the derivation of realistic estimates of the energy-optimal density of base stations corresponding to a given user density, under a fixed performance constraint. Our results allow different sleep mode proposals to be measured against the maximum theoretically achievable improvement. We show, through numerical evaluation, the possible energy savings in today’s networks, and we further demonstrate that even with the development of highly energy-efficient hardware, a holistic approach incorporating system level techniques is essential to achieving maximum energy efficiency.     

Inverted pendulum stabilization: Characterization of codimension-three triple zero bifurcation via multiple delayed proportional gains

The paper considers the problem of stabilization of systems possessing a multiple zero eigenvalue at the origin. The controller that we propose, uses multiple delayed measurements instead of derivative terms. Doing so, we increase the performances of the closed loop in presence of system uncertainties and/or noisy measurements. The problem formulation and the analysis is presented through a classical engineering problem which is the stabilization of an inverted pendulum on a cart moving horizontally. On one hand, we perform a nonlinear analysis of the center dynamics described by a three dimensional system of ordinary differential equations with a codimension-three triple zero bifurcation. On the other hand, we present the complementary stability analysis of the corresponding linear time invariant system with two delays describing the behavior around the equilibrium. The aim of this analysis is to characterize the possible local bifurcations. Finally, the proposed control scheme is numerically illustrated and discussed.     

移动边缘计算环境下的动态资源分配策略

在通讯设备爆炸式增长的时代,移动边缘计算作为5G通讯技术的核心技术之一,对其进行合理的资源分配显得尤为重要。移动边缘计算的思想是把云计算中心下沉到基站部署(边缘云),使云计算中心更加靠近用户,以快速解决计算资源分配问题。但是,相对于大型的云计算中心,边缘云的计算资源有限,传统的虚拟机分配方式不足以灵活应对边缘云的计算资源分配问题。为解决此问题,提出一种根据用户综合需求变化的动态计算资源和频谱分配算法(DRFAA),采用"分治"策略,并将资源模拟成"流体"资源进行分配,以寻求较大的吞吐量和较低的传输时延。实验仿真结果显示,动态计算资源和频谱分配算法可以有效地降低用户与边缘云之间的传输时延,也可以提高边缘云的吞吐量。     

The relationship between centrality and land use patterns: Empirical evidence from five Chinese metropolises

The relationship between location and land use patterns is one of the classic theoretical issues in urban studies. Classic models based on the monocentricity hypothesis have limitations in the interpretation of modern urban structure. China has experienced institutional transformation in recent decades, and the interaction of national government policy, market forces and the natural environment has influenced urban planning in Chinese metropolises, resulting in urban structures with special characteristics. This paper examines the distribution of location and land use intensity, and tested the Alonso model by the relationship between them in five Chinese metropolises using Point of Interest data, space syntax methodology, the grid weighted statistical method and the Geographically Weighted Regression (GWR) model. Universal patterns about the scaling relation between intensity of land use types and the centrality of location are revealed. The elasticity of land use types to location, from high to low sensitivity, is commercial, residential then industrial land in most of the five metropolises studied. The sensitivity sequence of land use studied suggests that the hypothetical model based on the classical Alonso model can explain the spatial structure of modern metropolises in China to some extent, especially for the commercial land. But the order of sensitivity of residential land and industrial land to location does not conform to the model. The spatial heterogeneity in land use intensity and centrality were explored and the factors embedded were discussed. It can be found that the relation between centrality and land use intensity conforms to power law. In most of the metropolises studied, when the scaling relation between land use intensity and centrality is super linear, the sequence of the frequency value from high to low are commercial, residential and industrial land; when the scaling relation is sublinear, the sequence of the frequency value is industrial, residential and commercial land.     

The status of and opportunities for utility-scale battery storage in Australia: A regulatory and market perspective

Australia's electricity market is rapidly adding renewable energy generation. Utility-scale batteries could have a major role in facilitating these transitions; however, their deployment is still largely state-subsidized. We summarize the current and future roles for batteries from a legal-economic perspective in the context of Australia's electricity market framework. We find that the future of batteries in Australia is not only a function of the large-scale deployment of renewables, their cost development and the comparative future cost of competing gas turbines but also of national electricity market and state policy reforms focusing on reliability.     

Stream-Based Data Sampling Mechanism for Process Object

Process object is the instance of process. Vertexes and edges are in the graph of process object. There are different types of the object itself and the associations between object. For the large-scale data, there are many changes reflected. Recently, how to find appropriate real-time data for process object becomes a hot research topic. Data sampling is a kind of finding c hanges o f p rocess o bjects. There i s r equirements f or s ampling to be adaptive to underlying distribution of data stream. In this paper, we have proposed a adaptive data sampling mechanism to find a ppropriate d ata t o m odeling. F irst o f all, we use concept drift to make the partition of the life cycle of process object. Then, entity community detection is proposed to find changes. Finally, we propose stream-based real-time optimization of data sampling. Contributions of this paper are concept drift, community detection, and stream-based real-time computing. Experiments show the effectiveness and feasibility of our proposed adaptive data sampling mechanism for process object.     

Performance investigation on a novel 3D wave flow channel design for PEMFC

Flow field structure can largely determine the output performance of Polymer electrolyte membrane fuel cell. Excellent channel configuration accelerates electrochemical reactions in the catalytic layer, effectively avoiding flooding on the cathode side. In present study, a three-dimensional, multi-phase model of PEMFC with a 3D wave flow channel is established. CFD method is applied to optimize the geometry constructions of three-dimensional wave flow channels. The results reveal that 3D wave flow channel is overall better than straight channel in promoting reactant gases transport, removing liquid water accumulated in microporous layer and avoiding thermal stress concentration in the membrane. Moreover, results show the optimal flow channel minimum depth and wave length of the 3D wave flow channel are 0.45 mm and 2 mm, respectively. Due to the periodic geometric characteristics of the wave channel, the convective mass transfer is introduced, improving gas flow rate in through-plane direction. Furthermore, when the cell output voltage is 0.4 V, the current density in the novel channel is 23.8% higher than that of conventional channel.     

粒子流粒子滤波检测前跟踪方法

检测前跟踪通过在连续多帧观测中对目标信号进行非相参积累以检测和跟踪微弱目标。积累的关键在于对目标轨迹的准确估计和多帧迭代滤波。传统粒子滤波器过于依赖建议分布，对目标轨迹的估计不够准确。新提出的粒子流滤波器是一种很好的替代方法，但其过于依赖当前时刻的量测而弱化多帧迭代滤波。本文提出一种在粒子滤波框架下采用粒子流的检测前跟踪方法:采用粒子滤波器进行多帧迭代滤波，但在每一帧内，采用Localized Exact Daum-Huang粒子流进行滤波。为了应对目标量测的不确定性，本文改造了Localized Exact Daum-Huang滤波器，为每个粒子在其邻域内寻找最大似然量测，并利用该量测更新粒子状态。Rayleigh分布杂波下Swerling1型起伏目标的检测和跟踪实验证明了所提算法的性能。