Verification of humans using the electrocardiogram

A feasibility study on the potential of the electrocardiogram (ECG) for biometrical applications is presented. A test set of 234 ECG recordings from 74 subjects was compiled emulating a realistic scenario for ECG biometrics by using short measurements of 10 s length in combination with a practicable choice of ECG leads. The long-term stability of the individual ECG was investigated during time periods up to several years. Verification and identification was done by utilizing the heart vector and a simple distance measure. As a result, encouraging error rates were obtained; for verification, for instance, the achieved equal error rate was smaller than 3%.     

中国干燥企业网站建设探讨

人类正走进以信息技术为核心的知识经济时代，信息技术与传统产业结合引发了新一轮的经济快速增长，中国干燥业也应加快自己的发展步伐。对中国干燥业网站建设现状进行了分析，探讨其所取得的经验及存在的不足，并尝试提出相应对策。     

喷嘴结构对高压射流特性影响研究

自20世纪70年代以来,高压水射流技术已在各工业领域逐渐得到了广泛应用,但迄今仍未能大规模采用,原因是还存在一些有待解决的问题,其中最为迫切的就是如何提高喷嘴射流效率、充分利用其能量的问题。喷嘴是水射流技术应用中获得高能量利用率的关键因素之一,其结构好坏直接影响射流质量。为充分发挥喷嘴最大效率,最大限度地利用水力能量,国内外有关专家从理论分析、数值计算和实验研究3个方面对喷嘴结构与高压射流特性的关系进行了研究分析,结果表明喷嘴结构对射流流动特性、冲蚀性能、空化现象等产生重要影响,指出提高喷嘴效率应当着眼于以下几个方面:加强基础研究;改变射流作用方式、将连续射流调制成脉动射流;充分利用空化空泡破裂压力,研制开发优质喷嘴,以期对拓宽水射流技术在工业中的应用有所帮助。     

Performance parameters of an ejector-absorption heat transformer

Ejector-absorption heat transformers (EAHTs) are attractive for increasing a solar-pond's temperature and for recovering low-level waste-heat. Thermodynamic analysis of the performance of an EAHT is complicated due to the associated complex differential equations and simulation programs. This paper proposes the use of artificial neural-networks (ANNs) as a new approach to determine the performance parameters, as functions of only the working temperatures of the EAHT, which is used to increase the solar pond's temperature under various working conditions. Thus, this study is helpful in predicting the performance of an EAHT where the temperatures are known. Scaled conjugate gradient (SCG) and Levenberg–Marquardt (LM) learning algorithms and a logistic sigmoid transfer-function were used in the network. The best approach was investigated for performance parameters with developed software using various algorithms. The best statistical coefficients of multiple determinations (R²-values) equal 0.99995, 0.99997 and 0.99995 for the coefficient of performance (COP), exergetic coefficient of performance (ECOP) and circulation ratio (F), respectively obtained by the LM algorithm with seven neurons. In the comparison of performances, results obtained via analytic equations and by means of the ANN, the COP, ECOP and F for all working situations differ by less than 1.05%, 0.7% and 3.07%, respectively. These accuracies are acceptable in the design of the EAHT. The ANN approach greatly reduces the time required by design engineers to find the optimum solution. Apart from reducing the time required, it is possible to find solutions that make solar-energy applications more viable and thus more attractive to potential users. Also, this approach has the advantages of high computational speed, low cost for feasibility, rapid turn-around, which is especially important during iterative design phases, and ease of design by operators with little technical experience.     

基于波动方程的聚焦点控制照明叠前深度偏移

 基于波动方程的聚焦点控制照明叠前深度偏移技术借助于差分计算，把速度、密度等介质参数的影响体现在差分计算的矩阵方程中，能够自动适应速度场的任意变化，快速傅里叶变换的使用也加速了波场延拓的计算速度。因此此法兼具有限差分偏移方法和傅里叶偏移方法的优点，既可适应速度场的剧烈变化，又可保证对陡倾地层的成像效果，是目前针对复杂构造最有效的成像方法之一。对于单个聚焦点及其周围的成像步骤为：①采用矩形网格情况下绕射走时的有限差分计算方法生成合成算子；②应用合成算子来合成面炮震源和面波记录；③对合成的面炮震源和面波记录做傅里叶有限差分法波动方程叠前深度偏移，得到该聚焦点及其附近区域的成像结果。按照上述成像步骤，将震源波场和炮集记录依据相应的外推公式进行延拓，最终应用成像条件求取成像值。在地质目标处选取多个聚焦点，可以得到面向目标的控制照明偏移成像，在多个层位上选取多个聚焦点进行控制照明叠前深度偏移，可以得到整块区域的成像。通过对Marmousi模型的试算，取得了较好的效果。     

核磁共振测井在致密含气砂岩中的应用

通过对核磁共振测井的T₂谱及其T₂截至值的合理选取，解释并获得了鄂尔多斯盆地西缘上古生界山西组、石盒子组致密砂岩储集层的总孔隙度、有效孔隙度、毛细管束缚水体积、可动水体积及渗透率等参数，据此预测的储集层孔隙结构特征与岩心分析测试结果很吻合。研究还发现，致密含气砂岩的T₂谱具有分布范围窄-中等，波形及差谱分析谱位置明显后移、分布中等、呈单峰的典型特征。结合常规测井资料，综合研究了致密砂岩储层特征及其含气层的测井响应。经测试验证，致密含气砂岩储层的核磁共振测井解释结果十分可靠，表明核磁共振测井可用于该区致密含气砂岩复杂储集层评价。     

免棱镜全站仪在桥梁检测中的应用

在公路桥梁施工过程中,每一项结构工程实体（桩、承台、柱）完成后,都要及时进行检测、验收.工作量大、危险性高、操作不方便,给工程检测工作带来很大的困难.本文结合几年来工程施工检测经验,利用免棱镜全站仪的功能,对实体工程中心坐标的检测和验收,提出了一种新方法,该方法简单,实用价值高,取得了良好经济效益.     

宽带钢冷轧机颤振控制的数值模拟

本文以较为准确的轧机振动状态下的轧制压力模型为基础，对宽带钢冷轧机干摩擦阻尼减振进行了数值模拟的研究。研究结果与实际观测值相等。     

Input-output finite-time stability of time-varying linear singular systems

This paper studies the input-output finite-time stabilization problem for time-varying linear singular systems. The output and the input refer to the controlled output and the disturbance input,respectively.Two classes of disturbance inputs are considered,which belong to L-two and L-infinity.Sufficient conditions are firstly provided which guarantee the input-output finite-time stability.Based on this,state feedback controllers are designed such that the resultant closed-loop systems are input-output finite-time stable.The conditions are presented in terms of differential linear matrix inequalities.Finally,an example is presented to show the validity of the proposed results.