有机羧酸钠盐对PET结晶和熔融行为的影响

采用差示扫描量热仪研究了5种具有不同取代基的苯甲酸钠盐作为结晶成核剂对聚对苯二甲酸乙二醇酯（HET）结晶和熔融行为的影响，并同滑石粉进行了对比。结果表明，成核剂的加入能明显改变PET的结晶和熔融行为。苯甲酸钠、对苯二甲酸甲酯单羧酸钠和对羟基苯甲酸钠提高既汀的熔融结晶温度（Tc）分别达22．93、21．7和19．37℃，但使PET降解严重；对苯酚钠甲酸钠能够提高Tc达17．75℃且对PET相对分子质量影响很小；对苯二甲酸二钠成核作用最差。低于滑石粉。此外，成核剂的成核能力越强，PET双熔融峰中的低温峰顶温度就越高。     

The effect of nitrogen oxides in air on the performance of proton exchange membrane fuel cell

The effects of NO_x on the performance of proton exchange membrane (PEM) fuel cell were investigated through the introduction of a mixture containing NO and NO₂, in a ratio of 9:1, into the cathode stream of a single PEM fuel cell. The NO_x concentrations used in the experiments were 1480 ppm, 140 ppm and 10 ppm, which cover a range of three orders. The experimental results obtained from the tests of durability, polarization, reversibility and electrochemical impedance spectroscopy (EIS) showed a detrimental effect of NO_x on the cell performance. The electrochemical measurements results suggested that the impacts of NO_x are mainly resulted from the superposition of the oxygen reduction reaction (ORR), NO and HNO₂ oxidation reactions, and the increased cathodic impedance. Complete recovery of the cell performance was reached after operating the cell with clean air and then purging with N₂ for hours.     

Structural Description of Polyaromatic Nucleus in Residue

The proton nuclear magnetic resonance spectroscopy （1H-NMR）, the synchronous fluorescence spectrometry （SFS） and the ruthenium ions catalyzed oxidation （RICO） method were used to determine the chemical structure of polyaromatic nucleus in Oman residue fractions. The results of 1H-NMR analyses showed that the average numbers of aromatic rings in the aromatics, resins and asphaltenes units were 3.2, 5.6 and 8.2, respectively. SFS was used to investigate the distribution of aromatic rings in residue fractions, the main distribution range of aromatic rings in aromatics, resins and asphaltenes were 3 4 rings, 3--5 rings and more than 5 rings, respectively. The aromatic network in residue fractions was oxidized to produce numerous carboxylic acids. The types and content of benzenepolycarboxylic acids, such as phthalic acid, benzenetricarboxylic acids, benzenetetracarboxylic acids, benzenepentacarboxylic acid and benzenehexacarboxylic acid disclosed the condensed types of aromatic nuclei in the core. The biphenyl fraction （BIPH）, the cata-condensed fraction （CATA）, the peri-condensed fraction （PERI） and the condensed index （BCI） were calculated based on the benzenepolycarboxylic acids formed. The results implied that there was less biphenyl type structures in all residue fractions. The aromatics fraction was almost composed of the cata-condensed type system, and the asphaltenes fraction was wholly composed of the peri-condensed type system, while in the resins fraction co-existed the two types, herein the peri-con- densed type was predominant over the cata-condensed type. Based on the analytical results obtained in the study, the components --aromatics, resins and asphaltenes -- were given the likely structural models.     

Reductive acid leaching of manganese dioxide with glucose: Identification of oxidation derivatives of glucose

The oxidation of glucose during the reductive leaching of pure MnO₂ and manganese ore in sulphuric acid at 90 °C MnO₂ was investigated. The aim was to identify the derivatives and the chemical pathway of glucose oxidation. Organic derivatives were monitored by HPLC using an Aminex HPX-78H column and UV detection. Chromatographic patterns of leaching solutions showed that major compound formed was formic acid. Minor quantities of glycolic, glyceric and traces of gluconic acids were identified. Results suggest that during the leaching reaction, the carbon chain of glucose is shortened by detachment of one carbon atom as formic acid.     

新抗冲型ACR的合成与研究

采用种子乳液聚合法制备了含有PBA＼PMMA＼PS三种组分的丙烯酸酯类抗冲型改性剂ACR，在ACR的幔层结构中引入接枝剂甲基丙烯酸烯丙酯（ALMA）来完善幔层结构，从而实现核一壳之间良好的结合，用红外光谱（FTIR）和差示扫描量热法（DSC）对ACR的组成和结构进行表征。研究结果表明：由PBA＼PMMA＼PS三组分构成的ACR在抗冲击性能上要略优于由简单的PBA＼PMMA构成的ACR，苯乙烯单体（St）最多可以取代大约1／3壳层的甲基丙烯酸甲酯（MMA），甲基丙烯酸烯丙酯（ALMA）的引入对幔层结构的完善起了显著的作用。     

Priority mix planning for semiconductor fabrication by fuzzy AHP ranking

With today’s keen competition, semiconductor market has changed from producer-oriented to customer-oriented. To be successful, companies need to consider both customer satisfaction in demand and the ultimate profit goal of companies. Semiconductor fabricators today must face an environment with multi-product types and multi-priority orders. Since semiconductor fabrication has a very complicated production process, the production planning of different products types and priority levels is an even more difficult task to experts. The objective of this study is to construct an analytical approach under a fuzzy subjective judgment environment, in which fuzzy analytic hierarchy process (AHP) method with entropy weight is utilized to deal with uncertainty, to generate performance ranking of different priority mixes. The results provide guidance to experts in a fab regarding strategies for accepting orders with the consideration of manufacturing efficiency in the aspects of product, equipment efficiency and finance.     

V_2O_5催化剂上甲醇乙醇一步合成醛类化合物的研究

在固定床反应器上研究了V2O5催化剂上甲醇、乙醇一步催化合成异丁醛等醛类化合物的反应。当反应在常压、350℃、进料比n(甲醇)/n(乙醇)=2、空速2.0h-1条件下进行时,乙醇转化率为89.05%,总醛产率达87.3%,其中异丁醛、乙醛、丙醛产率分别为16.71%、52.03%、18.56%,其余为丙醇、甲醛等化合物。当空速降为为0.5h-1时,乙醇转化率达到97.04%,异丁醛产率达29.07%,但总醛收率降为69.6%。该反应系统的反应历程被探讨。     

Gamma-Ray-Induced Multi-Effect on Properties of Chalcogenide Glasses

Gamma-ray irradiations induced various alterations in sulfur- and selenium-based chalcogenide glasses. The absorbed dose was in the range of 0.01–3.6 MGy. The glasses exhibit prominent sensitivity to γ-ray irradiation, characterized by changes in some of the physical properties of the glasses, e.g., optical transmission, optical band gap, density, and thermal expansion coefficient. The effects on glass structure and microscopic morphology were also studied by Raman spectra and scanning electron microscopic observations.     

Potentiometric measurement of state-of-charge of lead-acid battery by using a bridged ferrocene surface modified electrode

Alkanethiol bridged, 3-(11-mercaptoundecyl)[3](1,1′) ferrocenophane and 3-(11-mercaptoundecyl)[5](1,1′) ferrocenophane were synthesized and their electrochemical behaviour in aqueous sulphuric acid electrolyte investigated. It is found that these compounds, chemisorbed on a gold substrate, undergo reversible electrochemical oxidation/reduction. The anodic and cathodic peak potentials are independent of the acid concentration in the range 1.0 × 10⁻² to 1.0 × 10⁻⁷ M but change linearly with the acid concentration in the range 1–5 M. While this behaviour is similar to that for other ferrocenes like [3](1,1′) ferrocenophane and [5](1,1′) ferrocenophane the materials are much more chemically stable in aqueous sulphuric acid media. The presence of thiol group enhances the retainability of the bridged ferrocene while maintaining its chemical stability. The possibility of applying this observation for determining state-of-charge of lead-acid battery is discussed.     

A novel poly(p-phenylene vinylene)-b-poly(methyl methacrylate) rod-coil diblock copolymer

In this letter, a novel well-defined PPV-b-PMMA rod-coil diblock copolymer, consisting of PPV oligomer as its rod block and PMMA as its coil block, respectively, was prepared via ATRP for the first time. The structure of the copolymer was determined by the measurements of FTIR, ¹H NMR and gel permeation chromatography (GPC). The thermal and optical properties of the copolymers are investigated by DSC, TGA, UV-Vis and photoluminescence (PL) spectra. The results showed that, the introduction of PMMA coil block can improve both the thermal stability and optical properties of PPV oligomer. The highly ordered hexagonally honeycomb-structured film of the copolymer fabricated by vaporizing solvent is also investigated by optical microscope and SEM.