低能耗蓝牙4.0协议原理与实现方法

介绍了最新的蓝牙技术规范4.0协议中低能耗部分的协议原理以及协议架构。讨论了在分层结构通信协议实现中遇到的主要问题和应对的策略。结合通信协议实现的通常策略,讨论了低能耗蓝牙4.0协议实现的方法与策略。     

基于分解协调方法的光储系统配置—运行协同优化

以光伏-储能电池系统为研究对象,构建光储系统的配置-运行优化分解协调模型.首先,将考虑储能投资成本与光储系统运行成本在内的综合费用作为目标函数,利用Benders分解方法将模型分解为规划配置主问题和运行调度子问题,然后,通过分解协调优化得到储能电池的最优配置方案与系统的优化运行策略,通过设定光伏消纳率、自给率、内部收益率、动态投资回收期等一系列指标,对模型进行评价.此外,实现了 Benders分解法收敛过程和Bender割集累积过程的可视化,直观展现出容量配置与优化运行的交互作用.基于此,进一步利用K-means聚类分析算法建立了年光伏出力模型,求解长时间尺度上储能电池的最优配置,探讨了分解协调优化模型在中长期尺度下求解的可行性.     

X射线衍射-拉伸法测薄膜应力

薄膜应力的测量一直是一个困难的问题。本文尝试用一种新的方法——X射线衍射-拉伸法,对薄膜的应力进行检测,与侧倾法实验结果相比较,X射线衍射-拉伸法更为准确与可靠。     

基于有限元方法的CeCl3和NdCl3在LiCl-KCl熔盐中的电极动力学模拟

充分理解锕系元素和镧系元素在熔盐中的行为和性质是实现反应堆乏燃料熔盐电解后处理的关键,然而熔盐电解实验所需的高温环境、腐蚀性熔盐甚至放射性物质等条件限制了实验的广泛开展。为寻求一种低成本且可靠的获取元素在熔盐中性质的途径,采用有限元方法在不同温度下模拟了不同浓度的三氯化铈和三氯化钕在LiCl-KCl熔盐中的循环伏安曲线,并与实验数据做了对比。结果表明,有限元方法能够较为准确地反映实际电化学过程,继而为乏燃料熔盐电解后处理提供数据支持。     

基于深度强化学习的光储充电站储能系统优化运行

优化储能充放电策略有利于提升光储充电站运行经济性,但是现有模型驱动的随机优化方法无法全面考虑储能系统的复杂运行特性以及光伏发电功率、电动汽车充电负荷的不确定性.因此,提出一种基于深度强化学习的光储充电站储能系统全寿命周期优化运行方法.首先对储能运行效率模型和容量衰减模型进行精细化建模.然后考虑电动汽车充电需求、光伏出力和电价的不确定性,在满足电动汽车充电需求和光伏消纳的条件下,以光储充电站收益最大化为目标,建立了基于强化学习的储能优化运行问题.考虑到储能充放电决策动作的连续性,采用双延迟深度确定性策略梯度算法进行求解.采用实际历史数据对模型进行训练,根据当前时段状态对储能充放电策略进行实时优化.最后,对所提方法及模型进行测试,并将所提出的方法与传统模型驱动方法进行对比,结果验证了所提方法及模型的有效性.     

In situ technique for synthesizing multiple ceramic particulates reinforced titanium matrix composites (TiB + TiC + Y2O3)/Ti

In situ synthesized titanium matrix composites reinforced with multiple ceramic particulates including TiB, TiC and Y₂O₃ were fabricated by non-consumable arc-melting technique utilizing the chemical reaction among Ti, B₂O₃, B₄C and Y. The thermodynamic feasibility of the in situ reactions has been considered. X-ray diffraction (XRD) was used to identify the phases in the composites. Microstructures of the composites were observed by means of optical microscope (OM), scanning electron microscope (SEM) and electron probe. It is concluded that multiple reinforcements are synthesized and they show different shapes: TiB grows in needle shape; TiC grows in near-equiaxed and rod-like shapes; Y₂O₃ grows in near-equiaxed shapes when the content of Y is 0.6 wt.% and grows in dendritic shapes when the content of Y increases to 1.8 wt.%. Reinforcements TiB, TiC and Y₂O₃ are distributed uniformly in the titanium matrix.     

试论ISO9000在我国压铸工业中的实施

介绍了ＩＳＯ９０００标准中２０项质量管理规范，对其中的主要条款，结合压铸生产的需要作了说明，提出了我国压铸企业在质量管理方面如何与国际接轨的具体内容和方向。     

EXPERIMENTAL TESTING OF DRAW—BEAD RESTRAINING FORCE IN SHEET METAL FORMING

Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system, a simplified method to calculate draw-bead restraining force is put forward by experimental method in cup-shaped drawing process. The experimental results were compared with numerical results and proved agreement. It shows the method is effective.     

EFFECT OF RESIDUAL STRESS ON THE MARTENSITIC TRANSFORMATION OF SPUTTER-DEPOSITED SMA THIN FILMS

TiNi thin films were sputter-deposited on circular single-cry stal silicon substrates un-der various sputtering parameters. The crystal structure and residual stress of the as-deposited films were determined by X-ray diffraction and substrate-curvature method. The phenomenon of stress-suppressed martensitic transformation was observed. R is considered that the residual stresses in SMA thin films based on circular substrates act as balanced biaxial tensile stresses. The status of equilibrant delays the align-ment of self-accommodated variants and the volume shrinkage during the martensitic transformation.     

Modeling of Intercritical Heat Treatment of DP and TRIP Steels

The final microstructure of DP and TRIP assisted steels can evolve after hot working (hot rolling) or during post heat treatment process. In the formation of the final structure a number of different technological parameters have important roles, e.g. end temperature of rolling, cooling rates, temperature of intercritical annealing, etc. As a result of the individual factors and their combinations a lot of product technology routes are feasible. The effect of the different combinations of these technological parameters on the microstructure can be mapped by the special Jominy end-quench test (so called intercritical Jominy end-quench test) described in this paper. Unlike the traditional Jominy test, in this case there is a partial anstenizing between A1 and A3 temperatures which results in a given amount of ferrite in the microstructure before quenching. The method developed can be applied for mapping DP and TRIP assisted steels' microstructure in a wide range of technological parameters. The analysis of measured and calculated data can help us find the technological parameters optimal from the microstructural point of view.