Fe(Ⅲ)改性膨润土光催化降解水溶液中的4-氯苯酚

以Fe（Ⅲ）离子交换改性膨润土,制得一种多相Fenton催化剂;以4-氯苯酚为模型污染物,研究不同反应条件的影响。结果表明,复合催化剂主要含SiO2及α-Fe2O3两种晶型,Fe是以高催化活性的α-Fe2O3形式存在。复合催化剂在H2O2及紫外光的协同作用下,经60 min反应后对4-氯苯酚的降解率约100%,TOC去除率约70%,且其循环使用性能较好。在实际操作过程中,控制溶液体系的pH值为6以及H2O2与4-氯苯酚浓度比约15较为适宜;在4-氯苯酚的降解过程中,C—Cl键持续断裂,Cl-被释放出来,降解过程生成了一些不含氯的中间产物。     

Alcohol consumption detection through behavioural analysis using intelligent systems

We describe in this paper a new methodology for blood alcohol content (BAC) estimation of a subject. Rather than using external devices to determine the BAC value of a subject, we perform a behaviour analysis of this subject using intelligent systems. We monitor the user’s actions in an ordinary task and label those data to various measured BAC values. The obtained data-set is then used to train learning systems to detect alcoholic consumption and perform BAC estimation. We obtain good results on a mono-user base, and lower results with multiple users. We improve the results by combining multiple classifiers and regression algorithms.     

区间时变时滞离散系统的稳定性分析及控制器设计

含有区间状态时滞的系统在实际中有重要的应用,如它可以方便地描述一类网络控制系统.本文对含有区间状态时滞的线性离散系统考虑了稳定性分析与状态反馈控制器设计问题.为研究该类系统的稳定性,通过引入二重求和和三重求和构造了新型的Lyapunov-Krasovskii泛函.在对所构造的泛函处理其差分的过程中,利用了基于Abel引理的有限和不等式技术以及时滞分割方法,进而提出了该类系统稳定的线性矩阵不等式充分性条件.相对于以往的Lyapunov泛函,本文所提出的Lyapunov-Krasovskii泛函包含更多的时滞信息,而且所采用的差分处理方法不涉及原系统的模型变化,因而所提出的渐近稳定充分条件具有较低保守性.另外,相对于以前存在的自由权矩阵方法,本文所提出的方法具有较少的可行性变量矩阵,因而能有效地降低计算量.基于所提出的稳定性条件,本文进一步提出了无记忆状态反馈镇定控制器的设计方法.所提出镇定控制器设计方法也通过线性矩阵不等式给出,具有很好的数值稳定性.最后,通过数值算例验证了所提方法的正确性和有效性.     

基于学生成绩因子分析的高职院校软件技术专业课程建设研究

采用实证分析法,以广东某高职院校为研究对象,对该校2011级软件技术专业全体学生学习成绩进行因子研究。旨在揭示不同课程之间对于学生不同学习能力培养的联系,进而为专业课程建设提供现实依据。     

Creep behavior and failure mechanisms of CVI and PIP SiC/SiC composites at temperatures to 1650 °C in air

Creep properties of 2D woven CVI and PIP SiC/SiC composites with Sylramic™-iBN SiC fibers were measured at temperatures to 1650 °C in air and the data was compared with the literature. Batch-to-batch variations in the tensile and creep properties, and thermal treatment effects on creep, creep parameters, damage mechanisms, and failure modes for these composites were studied. Under the test conditions, the CVI SiC/SiC composites exhibited both matrix and fiber-dominated creep depending on stress, whereas the PIP SiC/SiC composites displayed only fiber-dominated creep. Creep durability in both composite systems is controlled by the most creep resistant phase as well as oxidation of the fibers via cracking matrix. Specimen-to- specimen variations in porosity and stress raisers caused significant differences in creep behavior and durability. The Larson-Miller parameter and Monkman-Grant relationship were used wherever applicable for analyzing and predicting creep durability.     

Monitoring of tool wear using measured machining forces and neuro-fuzzy modelling approaches during machining of GFRP composites

The challenges of machining, particularly milling, glass fibre-reinforced polymer (GFRP) composites are their abrasiveness (which lead to excessive tool wear) and susceptible to workpiece damage when improper machining parameters are used. It is imperative that the condition of cutting tool being monitored during the machining process of GFRP composites so as to re-compensating the effect of tool wear on the machined components. Until recently, empirical data on tool wear monitoring of this material during end milling process is still limited in existing literature. Thus, this paper presents the development and evaluation of tool condition monitoring technique using measured machining force data and Adaptive Network-Based Fuzzy Inference Systems during end milling of the GFRP composites. The proposed modelling approaches employ two different data partitioning techniques in improving the predictability of machinability response. Results show that superior predictability of tool wear was observed when using feed force data for both data partitioning techniques. In particular, the ANFIS models were able to match the nonlinear relationship of tool wear and feed force highly effective compared to that of the simple power law of regression trend. This was confirmed through two statistical indices, namely r² and root mean square error (RMSE), performed on training as well as checking datasets.     

A new method for expiration code detection and recognition using gabor features based collaborative representation

Text in images and video contains important information for visual content understanding, indexing, and recognizing. Extraction of this information involves preprocessing, localization and extraction of the text from a given image. In this paper, we propose a novel expiration code detection and recognition algorithm by using Gabor features and collaborative representation based classification. The proposed system consists of four steps: expiration code location, character isolation, Gabor features extraction and characters recognition. For expiration code detection, the Gabor energy (GE) and the maximum energy difference (MED) are extracted. The performance of the recognition algorithm is tested over three Gabor features: GE, magnitude response (MR) and imaginary response (IR). The Gabor features are classified based on collaborative representation based classifier (GCRC). To encompass all frequencies and orientations, downsampling and principal component analysis (PCA) are applied in order to reduce the features space dimensionality. The effectiveness of the proposed localization algorithm is highlighted and compared with other existing methods. Extensive testing shows that the suggested detection scheme outperforms existing methods in terms of detection rate for large image database. Also, GCRC show very competitive results compared with Gabor feature sparse representation based classification (GSRC). Also, the proposed system outperforms the nearest neighbor (NN) classifier and the collaborative representation based classification (CRC).     

易燃性智能测试仪软件系统的设计与实现

基于玩具安全标准对玩具易燃性的要求,结合PLC控制技术、网络技术和软件技术,对研制的智能燃烧测试仪的工作原理、硬件结构设计、功能特性进行了详细的论述,并重点对软件系统中的主控程序、人机界面、通信程序的设计与实现进行了阐述,指出此测试仪是一台软件与硬件相结合的设备,其软件系统的实现极大地提高了测试仪的自动化水平.