Synthesis,characterization and in vitro degradation of poly(ester-anhydride)s based on succinic acid and 1,6-bis-p-carboxyphenoxyhexane

This paper describes synthesis and characteristics of functional poly(ester-anhydride)s bearing allyl pendant groups. The polymers were obtained by polycondensation of 1,6-bis-p-carboxyphenoxyhexane (CPH) and oligo(3-allyloxy-1,2-propylene succinate) terminated with carboxyl groups (OSAGE). The carboxyl groups in OSAGE and in CPH were converted to mixed anhydride groups by acetylation with acetic anhydride. After that, prepolymers thus obtained were condensed in vacuum to yield poly(ester-anhydride)s. The structure of copolymers was confirmed by NMR spectroscopy. Influence of molecular weight of OSAGE as well as of the CPH and OSAGE content on selected properties of poly(ester-anhydride)s was examined. Poly(ester-anhydride)s were subjected to hydrolytic degradation at 37 °C, in aqueous phosphate buffer solution of pH 7.41 (PBS). The course of degradation was monitored by determination of weight loss of samples and ¹H NMR. Fracture surfaces of samples during degradation were examined by scanning electron microscopy.     

X-ray photoemission spectrum, electronic structure, and magnetism of UCu2Si2

The room temperature X-ray photoemission spectrum of the ferromagnetic compound UCu₂Si₂ (T_C = 100 K) was measured using an Al K_α source. Related theoretical spectra were computed from densities of electronic states obtained in the local density approximation (LDA), the generalized gradient approximation (GGA), and using the GGA + U method. The calculated spectrum is in a good agreement with the experimental one. The spin polarized calculations based on the GGA + U approach as well as GGA/LSDA with orbital polarization (OP) corrections taken into account provide values of the total magnetic moment in reasonable agreement with the experimental values ranging between 1.6 and 2.0 μ_B/U atom.     

N‐Oligo(3‐hydroxybutyrate)‐functionalized polypyrroles: towards bio‐erodible conducting copolymers

New copolymer materials have been prepared by chemical grafting of oligomeric 3‐hydroxybutyric acid (OHB) onto polypyrrole (PPy) derivatives. The influence of grafting density and molecular weight of OHB brushes on the physicochemical properties of prepared copolymers was investigated. PPy substrates were prepared by FeCl₃‐driven oxidative homopolymerization of N‐(2‐carboxyethyl)pyrrole or its copolymerization with pyrrole. The grafting method employed involved controlled anionic polymerization of β‐butyrolactone on pyrrole‐tethered potassium carboxylate active sites. Obtained PPy‐g‐OHB copolymers of varying grafting density and pendant polyester chain length were characterized and the observed structure–property relationships discussed. The impact of real time exposure to phosphate‐buffered saline environment was investigated and the residue products were characterized. Cross‐correlation of spectroscopic, thermal, electrical and elemental analysis data afforded comprehensive evaluation of the structure of prepared materials and their behaviour in hydrolytic medium. Erosion and degradation pathways have been identified, indicating ways to consciously tailor the physicochemical properties of these new biomimetic materials. © 2016 Society of Chemical Industry     

Raspberry seed extract effect on the ferroxidase activity of ceruloplasmin isolated from plasma

In this study, the effect of the raspberry seed extract (RSE) on the ferroxidase activity of ceruloplasmin (Cp) isolated from healthy male subject serum was analyzed. The ferroxidase activity of Cp was determined by spectrophotometry using Fe(II) – histidine complex and ferrozine as a chromogenic reagent. The ferroxidase activity of ceruloplasmin was demonstrated in dose-dependent way within the range 22–66 μg/ml. The effect of RSE on Fe(II) concentration, measured as the decrease of Fe(II) concentration in samples and expressed as ΔFe(II), was found to be a dose-dependent within the range 1.20–51.56 μg dm/ml. The ferroxidase activity of Cp was influenced by the RSE within its studied range. However, the addition of the highest concentration of RSE (51.56 μg dm/ml) to the sample containing the highest level of Cp (66 μg/ml) did not affect its ferroxidase activity. It may be suggested that the competition for Fe(II) as the substrate limits the effect of RSE on Cp activity and causes no further changes in Fe(II) elimination.     

Low computational cost CFD analysis of thermoacoustic oscillations

The numerical analysis of thermoacoustic oscillation phenomena by means of time-dependent CFD simulations usually requires a great computational effort, which may not be reasonable in industrial design. On the other hand, CFD tools provide the only approach that includes all the physical and chemical aspects involved in the thermoacoustic coupling between flame heat release and the acoustic modes of the burner/combustion chamber system. This paper presents some guidelines to reduce the computational effort required to perform a CFD analysis of the thermoacoustic oscillations with commercial codes. These guidelines are organized in a procedure that can be followed to analyze thermoacoustic coupling conditions that actually lead to unstable oscillations or are identified as potentially critical in the design phase. This procedure is also illustrated by an example of application, the partially-premixed flame type burner of a real 10 MW industrial boiler which shows noisy pressure fluctuations at a low frequency.     

Stripping of copper coatings from steel in Cr(VI)-free commercial bath

In this work the electrochemical characteristics of copper and steel in chromate, cyanide, and phosphate baths as well as in a commercial bath (ENSTRIP S-180), in the absence of chromium and cyanides were determined. Average rates of copper coatings stripping from steel in the above mentioned baths and the baths influence on the morphology of steel surfaces were described. It was found that the commercial bath ENSTRIP S-180 could be successfully used for stripping of copper coatings from steel elements.     

TIG brazing technology for zinc-coated sheet steel for bodywork

We propose a method for the assessment of the state of welded joints in terms of arc voltage signals and feed rate appraisal. The signals were recorded during laboratory tests. For the appraisal of the signals, we applied numerical parameters such as, for instance, kurtosis. On the basis of analysis results, we developed diagnostic rules which were written in the binary diagnostic matrix. The proposed method has been implemented in the form of software, the correctness of which has been verified on experimental data.     

Properties of pore structure of thin-layer external plasters under ageing in simulated environment

The basic and commonly used four types of thin-layer facade plasters on cement and silicate binders were subjected to 400 cycles of accelerated ageing in the simulate chamber. The main attention was focused on the character of pore structure evolution during of ageing process. To reach this objective, examinations of the microstructure by the mercury intrusion method and total porosity by the densitometry method were carried out in time per 100 cycles. During the study, the main emphasis was put on the open porosity and changes of dimensional groups of pores. On the ground of the hysteresis of the mercury pressure by mercury intrusion porosimetry testing, the presence of pores with capillary entrance was suggested. In view of this, the cylindrical and spherical model of porous structure has been defined. The contribution of capillary and spherical pores vary in time together with properties such as: average pore radius, length of cylindrical pores and their tortuosity. The changes of these values confirm that atmospherical ageing influences plasters’ binders in two zones. It appears on the one hand by the decrease of total porosity, length and diameter of capillaries but on the other hand by the increase of open porosity and the decrease of pores’ tortuosity. It indicates the tightening character of the inside pore structure of the examined plasters and at the same time it gives diverse effect in its external zone.