SiC ceramic micropatterns from polycarbosilanes

Micropatterned SiC ceramics were fabricated from polycarbosilanes applying a softlithographic replication technique. A polydimethylsiloxane mould replicated from a photolithographic microstructured silicon wafer was used as master structure. The polydimethylsiloxane mould was coated with a solution containing a mixture of two different polycarbosilanes in n-octane. After treatment at 200–400 °C the cross-linked polycarbosilane films were debonded and pyrolysed at 900 °C in nitrogen and subsequently crystallised at temperatures up to 1500 °C in argon. The cross-linking and thermal degradation behaviour of the polycarbosilanes was investigated by Fourier-transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. X-ray diffractrometry showed the expected development of a nanocrystalline β-SiC (3 nm) as the main phase with increasing temperature. However, traces of α-SiO₂ derived from the polycarbosilane precursors were also detected by X-ray analysis. Removal of the α-SiO₂ dioxide with hydrofluoric acid in the pyrolysed samples and subsequent increased the crystallite size to 7 nm. The Young's modulus determined by nanoindentation was increased from 3 GPa after cross-linking to 110 GPa after crystallisation. Scanning electron microscopy revealed, that the initial micropatterns were fully retained in the pyrolysed and crystallised SiC ceramics. The micropatterned cross-linked and crystallised β-SiC based substrates exhibited light scattering characteristics, which qualify them as promising candidates for diffractive optical elements in microoptical applications.     

One-step production of monolith-supported long carbon nanotube arrays

Aligned carbon nanotube (CNT) arrays over 150 μm long have been grown by catalytic chemical vapour deposition on the walls of bare cordierite monoliths in a single step. The method described avoids the need for the multiple pre-treatment steps currently applied, and is coupled with an increase in the thickness of the carbon layer obtained by an order of magnitude compared to literature. Uniform CNT growth has been obtained over different lengths of monolith. The resulting CNT/cordierite monoliths have a high surface area and low pressure drop, making them a viable support for use in industrial catalysis.     

Novel polyamide nanocomposites based on silicate nanotubes of the mineral halloysite

In this study, the silicate nanotubes of the mineral halloysite will be used as reinforcement in polyamide-6 (PA 6). The nanocomposites based on PA-6 and as-received halloysite were prepared by melt extrusion and an adjacent injection moulding process. Mechanical and thermomechanical properties have been investigated by tensile testing and dynamic mechanical analysis. The results show an increased strength and stiffness as well as an enhanced elongation at break at low halloysite content. To evaluate the potential of halloysite as a new candidate in the class of nanofillers, the properties of the halloysite nanocomposites has been compared to those of conventional nanocomposites based on organically modified montmorillonite. From this comparison it can be seen, that both types of nanocomposites show enhanced tensile properties as well as an increased storage modulus, but the increase in tensile strength is more pronounced in the organoclay nanocomposites, whereas the raise of the storage modulus is more prominent in the halloysite nanocomposites.     

Preparation,morphology and properties of acid and amine modified multiwalled carbon nanotube/polyimide composite

The precursor of polyimide, polyamic acid, was prepared by reacting 4,4′-oxydianiline (ODA) with 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA). Unmodified, acid-modified and amine-modified multiwall carbon nanotubes (MWCNT) were separately added to the polyamic acid and heated to 300 °C to produce polyimide/carbon nanotube composite. Scanning electron microscopic (SEM) and transmission electron microscopic (TEM) microphotographs reveal that acid-modified MWCNT and amine-modified MWCNT were dispersed uniformly in the polyimide matrix. The effect of the acid and amine-modified MWCNTs on the surface and volume electrical resistivities of MWCNT/polyimide composites were investigated . The surface electrical resistivity of the nanocomposites decreased from 1.28 × 10¹⁵ Ω/cm² (neat polyimide) to 7.59 × 10⁶ Ω/cm² (6.98 wt% unmodified MWCNT content). Adding MWCNTs influenced the glass transition temperatures of the nanocomposites. Modified MWCNTs significance enhanced the mechanical properties of the nanocomposites. The tensile strength of the MWCNT/polyimide composite was increased from 102 MPa (neat polyimide) 134 MPa (6.98 wt% acid modified MWCNT/polyimide composites).     

Excellent dielectric properties of PVDF-based composites filled with carbonized PAN/PEG copolymer fibers

Weak interfacial bonding between carbon materials and polymer matrix impedes the formation of homogeneous composites, challenging to the enhancement of dielectric properties of such systems. In this work, we designed novel carbonized polyacrylonitrile/polyethylene glycol copolymer fibers (CPCFs) and then used them as fillers to enhance the dielectric properties of poly(vinylidene fluoride) (PVDF)-based composites. These CPCFs are rich in nitrogen (8.55%) and oxygen (3.94%) atoms on the surface of them. The results of molecular dynamic (MD) simulations indicate that the existence of these atoms significantly increase the interaction energy between CPCFs and PVDF matrix from −45.13 kcal/mol to −62.22 kcal/mol, which promotes the intercalation of conductive CPCFs into insulated PVDF matrix to form ultrathin microcapacitors. As a result, the largest dielectric constant of CPCFs/PVDF composites can reach 1583 (1 kHz), which is about 150 times higher than that of pure PVDF.     

Mitochondria‐Targeting Magnetic Composite Nanoparticles for Enhanced Phototherapy of Cancer

Photothermal therapy (PTT) and photodynamic therapy (PDT) are promising cancer treatment modalities in current days while the high laser power density demand and low tumor accumulation are key obstacles that have greatly restricted their development. Here, magnetic composite nanoparticles for dual‐modal PTT and PDT which have realized enhanced cancer therapeutic effect by mitochondria‐targeting are reported. Integrating PTT agent and photosensitizer together, the composite nanoparticles are able to generate heat and reactive oxygen species (ROS) simultaneously upon near infrared (NIR) laser irradiation. After surface modification of targeting ligands, the composite nanoparticles can be selectively delivered to the mitochondria, which amplify the cancer cell apoptosis induced by hyperthermia and the cytotoxic ROS. In this way, better photo therapeutic effects and much higher cytotoxicity are achieved by utilizing the composite nanoparticles than that treated with the same nanoparticles missing mitochondrial targeting unit at a low laser power density. Guided by NIR fluorescence imaging and magnetic resonance imaging, then these results are confirmed in a humanized orthotropic lung cancer model. The composite nanoparticles demonstrate high tumor accumulation and excellent tumor regression with minimal side effect upon NIR laser exposure. Therefore, the mitochondria‐targeting composite nanoparticles are expected to be an effective phototherapeutic platform in oncotherapy.     

Light and Shape-Memory Polymers: Characterization,Preparation, Stimulation,and Application

Shape-memory polymers (SMPs) are smart materials that change shape when exposed to stimuli and have various applications in different fields due to their unique properties. Light, as a kind of electromagnetic radiation, plays an important role in understanding the structure-property relations of SMPs, preparing original shapes, using them as non-contact stimuli sources, and tuning the optical properties of SMPs. This review provides a comprehensive review of the involvement of light in structure-preparation-stimuli-application of SMPs. The review is divided into four sections. First, applications of optical/spectroscopic approaches that provide information for understanding structure-property relations in SMPs, especially during programming and recovery. Second, describes how to build SMPs with light, including different photochemical reactions and 3D photocuring technologies. Third, discusses how light is used to trigger the shape change of SMPs through both photochemical and photothermal mechanisms. Last, focuses on how to take advantage of the shape-memory effect to tune the optical characteristics of polymers, including various structures of SMP color-changing materials and their synthetic strategies. Future research could focus on developing efficient photothermal fillers, new 3D printing techniques for SMPs, exploring their use in biomedical and wearable devices, and optimizing SMPs for industrial applications.