硫化氢吸收液的电化学分解条件研究

理想的脱硫工艺应满足体积小、费用低、净化度高、无二次污染等要求。在碱性溶液吸收微量硫化氢时同步进行电解，可有效减小设备体积，并将硫化氢转变为氢气和硫磺，不产生恶性气味。为此，实验研究了温度、浓度、电流密度、pH值等因素对电解阳极过程的影响，确定了适宜的电解条件，并在该条件下进行了吸收实验。结果表明，在最佳电解条件下，硫化钠溶液能充分吸收天然气中经变压吸附提浓的硫化氢（800 mg/m³），吸收率大于99.9％。     

A new type of precursor for fibers in the system Si–C

Ceramic fibers with compositions in the system Si–C have a great potential for high-temperature applications. In recent years, our efforts have been dedicated to the development of polymers consisting of polysilanes suitable to spin fibers and build up matrices for CMC as well. The polysilanes are synthesized via disproportionation of the so-called disilane fraction [Richter, R., Roewer, G., Böhme, U., Busch, K., Babonneau, F., Martin, H.-P. et al., Appl. Organomet. Chem., 1997, 11, 71 (and references cited therein)]. A further thermal treatment yields materials which are soluble in organic solvents, and these solutions can be dry-spun to give fibers which are subsequently pyrolyzed. Solubility and high ceramic yield make this precursor a promising candidate for matrix infiltrations, too. The chemistry and the adjustment of viscosity and solubility to the requirements of the fiber processing as well as the conversion of the dried fibers to pure SiC fibers by thermal treatment will be reported.     

11B and 15N solid state NMR investigation of a boron nitride preceramic polymer prepared by ammonolysis of borazine

A poly(aminoborazine), precursor for hexagonal boron nitride (h-BN) obtained by reaction of borazine B₃N₃H₆ with ammonia, and its pyrolysis derivatives have been extensively characterised by ¹⁵N and ¹¹B MAS NMR. The various B and N sites have been identified according to their first neighbouring atoms, as well as to the second ones in the case of ¹⁵N, and have also been quantified. This study demonstrates that a suitable choice of NMR techniques together with the use of isotopic enrichment can lead to a large improvement in spectral resolution, which allows a better understanding of such complex BN preceramic polymer structures and permits to follow the polymer-to-ceramic transformation.     

Preparation of CeO2-ZrO2 mixed oxide with high surface area and high thermal stability

Ceria-zirconia solid particles have been recognized as a key material of the automotive exhaust catalysts since they can release and uptake oxygen owing to the rapid reversible oxidation states of cerium between Ce³⁺ and Ce⁴⁺. Several methods have recently been described to prepare the CeO₂-ZrO₂ solid particles used in the catalysts. In this paper, a new coprecipitation method is used to prepare the CeO₂-ZrO₂ solid particles. The Ce-Zr alcogel is dried and calcined in flowing N₂ not in flowing air under atmospheric pressure. The results show that the ceria-zirconia sample calcined at 650 °C has high surface area over 90 m²g⁻¹, which drops to 40 m²g⁻¹ following treatment at 900°C.     

基于LCoS芯片的微型电视系统设计与实现

介绍了LCoS芯片在电视接收系统中的应用，重点讨论了LCoS芯片的结构与特点。自主开发的LCoS模块采用模拟视频接口、兼容隔行和逐行扫描方式，可以简化系统电路设计，降低系统功耗。同时论述了LCoS微型电视机在信号接收、模拟视频处理、时序控制和音频电路等方面的特点，并给出了相关电路的设计方案。     

Deformation behaviour of iron-doped alumina

Compressive creep tests in air were carried out on 1 cat.% Fe-doped alumina at a temperature T=1400 °C. Iron doping affected the plastic deformation by different ways in relation with Fe²⁺ cations population. Fe²⁺ cations sped up the deformation rates. FeAl₂O₄ spinel precipitates were identified and they were found (i) to interact with alumina grain boundaries (ii) to limit the grain growth within a range of strain. The Fe²⁺ cations underwent oxidation and this resulted in the dissolution of the some precipitates and in the decrease of deformation rates. It was suggested that deformation sped up this evolution through mass transport and that time was not a dominating parameter.     

Supporting multiple-input,multiple-output custom functions in configurable processors

Configurable processors have emerged as a promising solution for high performance embedded systems. Many of these processors extend a RISC core with configurable functional units that execute dual-input, single-output (DISO) custom functions. Although studies have shown that supporting multiple-input, multiple-output (MIMO) custom functions can lead to significant speedups, mechanisms to efficiently achieve this have not been adequately addressed. The underlying reason is that a custom function is normally invoked by a single instruction, which usually transfers only two inputs and one output. Attempts to transfer more inputs and outputs in one instruction are impeded by the instruction length and the register file’s R/W ports. This paper proposes a simple extension to transfer multiple inputs and outputs of the custom functions using repeated instructions. While transferring the inputs and outputs may take a few extra cycles, our experiments show that the MIMO extension can still achieve an average 51% increase in speedup compared to a DISO extension and an average 27% increase in speedup compared to a multiple-input, single-output (MISO) extension.     

内蒙古煤系高岭土作为FCC催化剂基质的研究

研究两种内蒙古煤系高岭土（1^＃、2^＃）的化学组成、晶体结构并与苏州高岭土进行了比较。对三种高岭土进行酸改性，利用BET、吡啶-TPD和微反测试分别研究改性前后高岭土的性能特点。并将内蒙古高岭土1^＃与苏州高岭土采用半合成方法合成了FCC催化剂，测定了其裂化活性。研究结果表明，内蒙古1^＃具有较良好的晶体结构和化学组成，经酸改性后比表面积大大增加，具有合适的孔径分布，裂化活性较好，可以取代苏州高岭土作为FCC催化剂的基质。     

Magnetic Field Analysis of Disk Coreless Permanent Magnet Synchronous Motor Based on Thickness Variation Halbach Array

Being a new permanent magnets(PMs) arrangement, the Halbach array could approve the magnetic flux density effectively, through weakening the magnetic flux density in one side of the PMs array, meanwhile strengthening the magnetic flux density in the other side. In the disk coreless PM synchronous motor (PMSM), the magnetic flux density is required to be sine wave and the peak value should be as high as possible. The paper deals with the application of the 90° Halbach array in the disk coreless PMSM, adopting NdFeB PMs. For the thickness of PMs influences the magnetic flux density in the air gap, the thickness variation technology is adopted. Through altering the adjacent PMs thickness, nine different PMs thickness combination is analyzed by FEM methods. And the conclusion is that when the thickness of tangential magnetization PMs is great than that of the radial magnetization PMs, the magnetic flux density wave is closer to sine wave than when the thickness of the tangential magnetization PMs is smaller than that of the radial magnetization PMs. Furthermore, when the thickness of the tangential magnetization PMs is great than that of the radial magnetization PMs, keeping the thickness of the tangential magnetization PMs being 0.006 m and the thickness of the radial magnetization PMs variation from 0.0048 m to 0.006 m, the magnetic flux density in the air gap will become closer to sine wave gradually, and then it becomes nonsinusoidal again. And when the thickness of radial magnetization PMs is 0.0054 m and 0.0055 m, the waves of magnetic flux density in the air gap are better than others.