An implementation for a fast public-key cryptosystem

In this paper we examine the development of a high-speed implementation of a system to perform exponentiation in fields of the form GF(2 ⁿ ). For sufficiently large n, this device has applications in public-key cryptography. The selection of representation and observations on the structure of multiplication have led to the development of an architecture which is of low complexity and high speed. A VLSI implementation has being fabricated with measured throughput for exponentiation for cryptographic purposes of approximately 300 kilobits per second.     

The digi-neocognitron: a digital neocognitron neural network modelfor VLSI

One of the most complicated ANN models, the neocognitron (NC), is adapted to an efficient all-digital implementation for VLSI. The new model, the digi-neocognitron (DNC), has the same pattern recognition performance as the NC. The DNC model is derived from the NC model by a combination of preprocessing approximation and the definition of new model functions, e.g., multiplication and division are eliminated by conversion of factors to powers of 2, requiring only shift operations. The NC model is reviewed, the DNC model is presented, a methodology to convert NC models to DNC models is discussed, and the performances of the two models are compared on a character recognition example. The DNC model has substantial advantages over the NC model for VLSI implementation. The area-delay product is improved by two to three orders of magnitude, and I/O and memory requirements are reduced by representation of weights with 3 bits or less and neuron outputs with 4 bits or 7 bits.     

New full-voltage-swing BiCMOS buffers

Circuit techniques are presented for increasing the voltage swing of BiCMOS buffers through active charging and discharging using complementary bipolar drivers. These BiCMOS circuits offer near rail-to-rail output voltage swing, higher noise margins, and higher speed of operation at scaled-down power supply voltages. The circuits are simulated and compared to BiCMOS and CMOS buffers. The comparison shows that the conventional BiCMOS and the complementary BiCMOS buffers are efficient for power supply voltages greater than 3V and that if the power supply voltage is scaled down (<3 V) and the load capacitance is large (>1 pF), the complementary BiCMOS buffers would be the most suitable choice. They provide high speed and low delay to load sensitivity and high noise margins. The first implementation is favorable near a 2.5-V power supply for its smaller area     

A multimedia interactive conferencing application for personalworkstations

The multimedia interactive conferencing application (MICA), a personal-workstation application for multipoint visual teleconferencing, is described. MICA allows people at two or more locations to share visual material such as documents, photographs, and computer screens in a highly interactive way. It supports the distribution, storage, retrieval, and high-quality display of visuals, real-time interaction by pointing and annotation, and meeting services facilities. The context of multimedia teleconferencing and computer-supported cooperative work is established, relating earlier research to the design of MICA. The services MICA offers are outlined. The handling, compression, and display of multiple media, and the design of a suitable user interface for MICA are discussed     

A vectorial boundary element method analysis of integrated optical waveguides

In this paper, a new vectorial boundary element method is introduced and applied to the modal analysis of dielectric waveguides with piecewise homogeneous refractive indexes. The procedure, which is free of spurious modes, determines the full field distribution from the longitudinal fields at the refractive index boundaries. Singular kernels are evaluated through series solutions while the electric field discontinuity at corners is accommodated through either a grid refinement technique or a semianalytic approach. Our formalism generates propagation constants and modal field distributions for several representative refractive index profiles with far higher accuracy than standard finite-difference or finite-element procedures.     

Discovering Services Is Not Enough

Faced with multiple electronic devices, service providers, and ISPs, tomorrow's mobile users might find it challenging to identify available services and acquire the rights to use them. The authors tackle this problem, combining the acquisition of role-based credentials with servicediscovery.     

Development of a small DMFC bipolar plate stack for portable applications

The direct methanol fuel cell (DMFC) is regarded as a promising candidate in portable electronic power applications. Bipolar plate stacks were systematically studied by controlling the operating conditions, and by adjusting the stack structure design parameters, to develop more commercial DMFCs. The findings indicate that the peak power of the stack is influenced more strongly by the flow rate of air than by that of the methanol solution. Notably, the stack performance remains constant even as the channel depth is decreased from 1.0 to 0.6 mm, without loss of the performance in each cell. Furthermore, the specific power density of the stack was increased greatly from ∼60 to ∼100 W l⁻¹ for stacks of 10 and 18 cells, respectively. The current status of the work indicates that the power output of an 18-cell short stack reaches 33 W in air at 70 °C. The outer dimensions of this 18-cell short stack are only 80 mm × 80 mm × 51 mm, which are suitable for practical applications in 10–20 W DMFC portable systems.     

Determination of gas dispersion in vapor extraction of heavy oil and bitumen

In this work, a mathematical model is developed and simulated to determine gas dispersion along with solubility during the vapor extraction (Vapex) of live oil from a laboratory scale physical model. The physical model is a rectangular block of homogenous porous medium saturated with heavy oil and bitumen. At a given temperature and pressure, the block is initially exposed on its side to a solvent gas, which diffuses into the medium and gets absorbed. The absorption of gas reduces the viscosity of heavy oil and bitumen causing it to drain under gravity. The low-viscosity “live oil” is produced at the bottom of the porous block. The production of live oil with time is accompanied by the shrinkage of oil in the block as well as its increased exposure to gas from top. These phenomena of Vapex are described by the mathematical model, which is used to calculate live oil production with various values of gas solubility and dispersion. Their optimal values are determined for the vapor extraction of Cold Lake bitumen with butane by matching calculated live oil production with its experimental values published earlier.     

The generalized Kuhn model of linear viscoelasticity

We propose a generalization of the Kuhn model of linear viscoelasticity. This generalization, which has four material parameters, is able to provide a near frequency independent response over a wide range of frequencies. It is useful for highly dissipative materials such as asphalt concrete. It is derived by generalizing Lubliner and Panoskaltsis’s modified Kuhn model, but we also show that it is closely related to fractional derivative models. We show that the model admits a rheological approximation, that is, an approximation by classical springs and dashpots. The model and rheological representation are compared to experimental data.     

Multi-method learning and assimilation

Considering the wide range of possible behaviours to be acquired for domestic robots, applying a single learning method is clearly insufficient. In this paper, we propose a new strategy for behaviour acquisition for domestic robots where the behaviours are acquired using multiple differing learning methods that are subsequently incorporated into a common behaviour selection system, enabling them to be performed in appropriate situations. An example of the implementation of this strategy applied to the entertainment humanoid robot QRIO is introduced and the results are discussed.