Efficient hydrogen production for industry and electricity storage via high-temperature electrolysis

The paper describes the development status of Sunfire's reversible solid oxide cell (RSOC) technology. Here, Sunfire is a pioneer in the field of high-temperature electrolysers (HTE) for renewable hydrogen production which can be operated as a fuel cell for power generation in a reverse mode. The maturity of the technology is improved stepwise so that first applications in the field of hydrogen production for industry and electricity storage can be tackled. Three application examples where larger scale prototype has been installed will be discussed: 1) A power-to-power electricity storage based on hydrogen, 2) a RSOC unit that is installed in an iron and steel works, and 3) a pressurized SOEC prototype which will be integrated with a methanation unit. Results show the potentials of the technology in connection with fluctuating renewable energy sources.     

面向草莓抓取的气动四叶片软体抓手研制

农林业中果蔬的自动化采摘需求日趋强烈,末端抓手是实现无损采摘的关键。传统的末端抓手以刚性结构居多,现有的各种柔性抓手也存在抓取力不足、包覆性不佳等缺点。本文以草莓的无损采摘为研究对象,提出将草莓外部轮廓曲线作为设计曲线,设计了一种新型气动四叶片软体抓手。首先,对软体抓手的结构做仿真优化,提出一种安全地附着在目标物表面的设想。然后,在进行草莓表面的最小破坏应力试验的基础上,测试了软体抓手的末端力,验证了其实现无损抓取的可行性。再次,利用动态捕捉技术,研究了软体抓手叶面的弯曲变形规律。最后,选择使用弧线型气体通道的软体抓手进行了草莓抓取测试,结果证明了气动四叶片软体抓手可以实现草莓的无损抓取,抓取成功率达90%,破损率为2%,表明所研制的四叶片软体抓手用于草莓抓取时具有良好的稳定性和实用性,可用于草莓采摘的末端执行器。本研究也可为其他易损果蔬的采摘技术提供理论基础和技术支撑。     

Advances in multimetallic alloy-based anodes for alkali-ion and alkali-metal batteries

In order to meet the growing demand of portable electronic devices and electric vehicles, enhancements in battery performance metrics are required to provide higher energy/power densities and longer cycle lives, especially for anode materials. Alloying anodes, such as Group IVA elements-based materials, are attracting increasing interest as anodes for next-generation high-performance alkali-metal-ion batteries (AMIBs) owing to their extremely high specific capacities, low working voltages, and natural abundance. Nevertheless, alloying-type anodes usually display unsatisfactory cycle life due to their intrinsic violent volumetric and structural changes during the charge–discharge process, causing mechanical fracture and exacerbating side reactions. In order to overcome these challenges, efforts have been made in recent years to manufacture multimetallic anodes that can accommodate the induced strain, thus showing high Coulomb efficiency and long cycle life. Meanwhile, much work has been conducted to understand the details of structural changes and reaction mechanisms taking place by in-situ characterization methodologies. In this paper, we review the various recent developments in multimetallic anode materials for AMIBs and shed light on optimizing the anode materials. Finally, the perspectives and future challenges in achieving the practical applications of multimetallic alloy anodes in high-energy AMIB systems are proposed.     

A two stage heuristic algorithm for the integrated aircraft and crew schedule recovery problems

Airline disruptions incurred huge cost for airlines and serious inconvenience for travelers. In this paper, we study the integrated aircraft and crew schedule recovery problem. A two stage heuristic algorithm for the integrated recovery problem is proposed. In the first stage, the integrated aircraft recovery and flight-rescheduling model with partial crew consideration is built. This model is based on the traditional multi-commodity network model for the aircraft schedule recovery problem. The objective of this model also includes minimization of the original crew connection disruption. In the second stage, the integrated crew schedule recovery and flight re-scheduling model with partial aircraft consideration is built. We proposed a new multi-commodity model for the crew schedule recovery. The main advantage of such model is that it is much more efficient to integrate the flight-scheduling and aircraft consideration. New constraints are incorporated to guarantee that the aircraft connections generated in the stage 1 are still feasible. Two stages are run iteratively until no improvement can be achieved. Experimental results show that our method can provide better recovery solutions compared with the benchmark algorithms.     

A novel utilized method of tar derived from biomass gasification for fabricating binder-free all-solid-state hybrid supercapacitors

As an industrial pollutant, tar derived from biomass gasification is used as the precursor for fabricating a novel carbon-metal hydroxides composite electrode. A slurry (the mixture of tar, KOH and melamine) is daubed uniformly onto the nickel foam, which is directly carbonized to form NPC@LDH electrode material. This electrode is further coated with NiCo-LDH nanosheets using an electrodeposition method to form NF@NPC@LDH. The newly made NF@NPC@LDH electrode exhibits a high specific capacity of 9.6 F cm⁻² at a current density of 2 mA cm⁻² and good rate performance (55.3% retention). Furthermore, a hybrid NF@NPC@LDH//NF@PC all-solid-state supercapacitor is fabricated, and the device exhibits high energy density of 1.28 mWh cm⁻³ at a power density of 8.04 mW cm⁻³, low resistance and good cycling stability.     

大庆长垣西侧扶杨油层油水同层形成及识别

结合松辽盆地大庆长垣西侧扶余、杨大城子油层的勘探实践,从顶生下储的特殊成藏原理出发,详细地讨论了扶余、杨大城子油层的油水层形成机理,提出了2种形成模式。认为扶杨油层的油水同层是在以上覆烃源岩的超压为驱动力的成藏条件下形成,油水混合运移注入储层,由于储层的孔喉小,油水重力分异不好,造成孔隙存油,喉道存水。这种低渗透储层孔隙结构复杂,含油饱和度低,油水在孔隙中分布状况特殊,使得电阻率等曲线反映流体的信息变弱,造成油水层识别变难。为此提出多参数降维油气水层识别方法,经实际应用取得较好的效果。      

V波段小型化低相噪频率综合器

本文研究了一种V波段超小型低相噪频率综合器,研制了L段捷变频频综、Ku波段取样锁相源、上变频组件、倍频器等四个小型化组件.为了得到较低的相位噪声和捷变频速度,本捷变频频综采用上变频-倍频方案,其中DRO PLS保证低相位噪声性能,L波段捷变频频综保证捷变频功能.该频综尺寸为100×80×30mm³,相位噪声低于-86dBc/Hz(1kHz),捷变频时间小于40μs,杂波抑制优于-60dBc.     

Automatic conversion from lexical words to prosodic words for mandarin text-to-speech system

In real speech, not like lexical words (LWs), prosodic words (PWs) are basic rhythmic units. The naturalness of a Text-to-Speech (TTS) system is directly influenced by the segmentation of the PWs. Most of the PWs are the combination of several LWs. In this paper, three Lexical Combination Models are proposed to combine LWs into PWs, including a Directed Acyclic Graph Model, a Segmentation Model and a Markov Model (MM). To cope with the situation where some long LWs should be segmented into two or more PWs, a Lexical Split Model (LSM) is applied to the long LWs. Experimental results prove that relatively constant results with various training data can be obtained from a MM. The Transformation-Based Error Driven Learning (TBED) algorithm, for its high performance of individual property, is applied in combination with the MM to improve the precision of PW segmentation. Experiments show that among the three proposed models, the MM combined with TBED and LSM, leads to the best performance, in which a precision of 93.00% and a recall of 93.23% are achieved. The perception test indicates that by using PWs as the lowest prosodic units a speech sounds more natural and acceptable than by using LWs. This paper is supported by NSFC Project (60503071); 973 Natural Basic Research Program of China (2004CB318102); Postdoctor Science Foundation of P. R. China (20070420275).     

Electrical properties of dysprosium phthalocyanine films

Forty-four nanometers thick films of alkyl-substituted dysprosium phthalocyanine molecules were prepared on carefully cleaned indium tin oxide (ITO) substrates by the spin casting method. UV–vis absorption spectra and dc conduction characteristics were obtained in order to investigate the structure–conduction property relationship. The conduction is Ohmic at low applied voltages but the space charge limited mechanism is prevalent at relatively high voltages. The conductivities of both as-deposited and heat treated films are found to show directionally anisotropic behaviour. The columnar conductivity was found to be significantly large in the liquid crystalline state.