Evolution of insoluble eutectic Si particles in anodic oxidation films during adipic-sulfuric acid anodizing processes of ZL114A aluminum alloys

The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114A aluminum alloy substrates were in-vestigated by optical microscopy (OM) and scanning electron microscopy (SE...     

高斯曲率内蕴公式的几种形式的推导方法

考虑曲面上高斯曲率内蕴公式的表示问题,运用曲面基本方程的矩阵表示法,给出了高斯曲率是内蕴量的直接的显式公式,并指出这种内蕴公式与Brioschi的表示公式是明显一致的;给出了高斯曲率简化公式的推导来源,揭示出了高斯曲率隐式公式的发现过程.     

Creep behavior and failure mechanisms of CVI and PIP SiC/SiC composites at temperatures to 1650 °C in air

Creep properties of 2D woven CVI and PIP SiC/SiC composites with Sylramic™-iBN SiC fibers were measured at temperatures to 1650 °C in air and the data was compared with the literature. Batch-to-batch variations in the tensile and creep properties, and thermal treatment effects on creep, creep parameters, damage mechanisms, and failure modes for these composites were studied. Under the test conditions, the CVI SiC/SiC composites exhibited both matrix and fiber-dominated creep depending on stress, whereas the PIP SiC/SiC composites displayed only fiber-dominated creep. Creep durability in both composite systems is controlled by the most creep resistant phase as well as oxidation of the fibers via cracking matrix. Specimen-to- specimen variations in porosity and stress raisers caused significant differences in creep behavior and durability. The Larson-Miller parameter and Monkman-Grant relationship were used wherever applicable for analyzing and predicting creep durability.     

Photocatalytic oxidation activity of titanium dioxide film enhanced by Mn non-uniform doping

1 Introduction Heterogeneous photocatalysis is an effective technique for reducing the concentration of pollutants at low concentration. It has been demonstrated that almost all organics can be oxidized to generate carbon dioxide, water and simple mineral…     

Pressure sintering of W-15wt.%Cu alloys prepared by mechanical alloying as a subsequent densification treatment method

1. Introduction W-Cu alloys are widely used in many fields due to their superior properties [1]. With the rapid de-velopment of technology, more demands are being made on the W-Cu alloys. For instance, higher heat conductivity, lower thermal expansion coefficient, and more rigorous air tightness are required when these alloys are used for electronic package materi-als, such as heat sink materials. Especially, the re-quirement of more rigorous air tightness means that the W-Cu alloys must pos…     

A Lyapunov‐based small‐gain approach on design of triggering conditions in event‐triggered control systems

This paper studies a Lyapunov‐based small‐gain approach on design of triggering conditions in event‐triggered control systems. The event‐triggered control closed‐loop system is formulated as a hybrid system model. Firstly, by viewing the event‐triggered control closed‐loop system as a feedback connection of two smaller hybrid subsystems, the Lyapunov‐based small‐gain theorems for hybrid systems are applied to design triggering conditions. Then, a new class of triggering condition, the safe, adjustable‐type triggering condition, is proposed to tune the parameters of triggering conditions by practical regulations. This is conducive to break the restriction of the conservation of theoretical results and improve the practicability of event‐triggered control strategy. Finally, a numerical example is given to illustrate the efficiency and the feasibility of the proposed results. Copyright © 2015 John Wiley & Sons, Ltd.     

High‐precision formation control of nonlinear multi‐agent systems with switching topologies: A learning approach

Arbitrary high precision is considered one of the most desirable control objectives in the relative formation for many networked industrial applications, such as flying spacecrafts and mobile robots. The main purpose of this paper is to present design guidelines of applying the iterative schemes to develop distributed formation algorithms in order to achieve this control objective. If certain conditions are met, then the control input signals can be learned by the developed algorithms to accomplish the desired formations with arbitrary high precision. The systems under consideration are a class of multi‐agent systems under directed networks with switching topologies. The agents have discrete‐time affine nonlinear dynamics, but their state functions do not need to be identical. It is shown that the learning processes resulting from the relative output formation of multi‐agent systems can converge exponentially fast with the increase of the iteration number. In particular, this work induces a distributed algorithm that can simultaneously achieve the desired relative output formation between agents and regulate the movement of multi‐agent formations as desired along the time axis. The illustrative numerical simulations are finally performed to demonstrate the effectiveness and performance of the proposed distributed formation algorithms. Copyright © 2014 John Wiley & Sons, Ltd.     

Morphological image fusion using the extracted image regions and details based on multi-scale top-hat transform and toggle contrast operator

Remaining useful information of the original images in the fusion image is very important in image fusion. To be effective for image fusion, a multi-scale top-hat transform and toggle contrast operator based algorithm using the extracted image regions and details is proposed in this paper. Top-hat transform could extract image regions, and operations constructed from toggle contrast operator could extract image details. Moreover, multi-scale top-hat transform and toggle contrast operator could be used to extract the effective image regions and details at multi-scales of the original images. Then, the extracted image regions and details are imported into the final fusion image to form the effective fusion result. Thus, the proposed multi-scale top-hat transform and toggle contrast operator based algorithm is an effective image fusion algorithm to keep more useful image information. The combination of the top-hat transform and toggle contrast operator for effective image fusion is the main contribution of this paper, which is the extension of the previous work using only the toggle contrast operator for edge preserved image fusion. Experimental results on multi-modal and multi-focus images show that the proposed algorithm performs very well for image fusion.     

公路施工压力试验机网络监测系统设计与实现

针对目前公路施工领域力学试验过程中数据可靠性低、不便于监测的缺点,设计了压力试验机网络监测系统;在论述了系统的总体结构的基础上,完成了试验数据采集与网络传输系统的软硬件设计、样品条形码信息管理系统设计,以及试验数据与信息查询系统设计;基于文章方法设计的网络监测系统已经在云南某高速公路工地试验室得到应用,实际运行情况表明,系统工作高效稳定,实现了对工地试验室试验过程的远程监督和管理,以及对样品的过程跟踪,可以有效保证工程项目的施工质量。