Improvement of biohythane production from Chlorella sp. TISTR 8411 biomass by co-digestion with organic wastes in a two-stage fermentation

The suitability of molasses, Napier grass (Pennisetum purpureum), empty fruit bunches (EFB), palm oil mill effluent (POME), and glycerol waste as a co-substrate with Chlorella sp. TISTR 8411 biomass for biohythane production was investigated. Mono-digestion of Chlorella biomass had hydrogen and methane yield of 23–35 and 164–177 mL gVS⁻¹, respectively. Co-digestion of Chlorella biomass with 2–6% TS of organic wastes was optimized for biohythane production with hydrogen and methane yield of 17–75 and 214–577 mL gVS⁻¹, respectively. The hydrogen and methane yield from co-digestion of Chlorella biomass with molasses, POME, and glycerol waste was increased by 8–100% and 80–264%, respectively. The biohythane production of co-digestion of Chlorella was 6–11 L L-mixed waste⁻¹ with an optimal C/N ratio range of 19–41 and H₂/CH₄ ratio range of 0.06–0.3. Co-digestion of Chlorella biomass was significantly improved biohythane production in term of yield, production rate, and kinetics.     

Callindra haematocephata and Peltophorum pterocarpum flowers as natural sensitizers for TiO2 thin film based dye-sensitized solar cells

We have studied the performance of dye-sensitized solar cells employing natural dye extracted from the flowers Callindra haematocephata and Peltophorum pterocarpum as sensitizers for TiO₂ photoanode. The extracts have shown appreciable absorption in the visible region. FTIR studies indicated the presence of anthocyanins and β-carotene in the flowers of C. haematocephata and P. pterocarpum respectively. The extracts were anchored on TiO₂ film deposited on transparent conductive glass (FTO) which were used as photoanode. The dye coated TiO₂ film electrode, Pt counter electrode and electrolyte (I⁻₃) assembled into a cell module was illuminated by a light source with intensity 100 mW/cm² to measure the photoelectric conversion efficiency of the DSSCs. From the J-V characteristic curves of cells, the parameters related to the solar cell performance were determined. The conversion efficiency of the DSSC employing natural dye extract from the flower C. haematocephata and P. pterocarpumwere was found as 0.06% and 0.04%, with open-circuit voltage (V_OC) of 370 mV & 400 mV, short-circuit current density (J_SC) of 0.25 mA/cm² & 0.15 mA/cm², fill factor (FF) of 0.70 & 0.71 and P_max of 65 & 45 μW cm⁻² respectively. The extract of the flower C. haematocephata exhibited better photosensitization action compared to the flower of P. pterocarpum.     

In vitro Streptococcus mutans biofilm formation on surfaces of chlorhexidine-containing dentin bonding systems

This in vitro study evaluated the influence of chlorhexidine diacetate (CDA) when blended within dentin bonding systems (DBSs) on Streptococcus mutans (S. mutans) biofilm formation.One commercially available 0.2% wt CDA-containing DBS (Peak Universal Bond) and five experimental 0.2% wt CDA-containing DBS formulations (experimental Adper Scotchbond 1XT plus experimental resins, R₂, R₃, R₄, R₅) were assessed vs their no-CDA containing counterparts. Twenty-eight DBSs disks were prepared for each group (6.4 mm×1.0 mm) and cured for 80 s at 800 mW/cm² in a nitrogen atmosphere. A modified Drip-Flow Reactor was used to grow S. mutans biofilms on specimen surfaces for 24 h and adherent, viable biomass was evaluated using a tetrazolium salt assay (MTT). Two specimens from each of the tested materials were processed with LIVE/DEAD stain and observed using laser confocal microscopy (CLSM) while two disks from each group were examined by using scanning electron microscopy (SEM).MTT assay, CLSM and SEM observations showed that CDA addition decreased, increased or did not change S. mutans biofilm formation. The lowest biofilm formation was obtained with Peak Universal Bond and R₅ (with and without CDA).It may be concluded that the chemical composition of DBSs determines their ability to promote or hamper biofilm formation. Therefore, CDA addition may be helpful in modulating biofilm formation provided that DBS formulation is tuned and optimized.     

Impact of experimental warming on soil temperature and moisture of the shallow active layer of wet meadows on the Qinghai-Tibet Plateau

Climate change is now increasingly evident on the Qinghai–Tibet Plateau and has a strong impact on both the abiotic and biotic components of ecosystems, particularly on permafrost, active layer thickness, vegetation, and soil properties. Permafrost ecosystems are recognized to be sensitive to the influences of the changing climate, which may disturb the permafrost soil carbon (C) pool and lead to huge C emissions. To facilitate the assessment of warming effects on the temperature and moisture patterns in the shallow soil of the active layer of the wet meadows on the Qinghai–Tibet Plateau, near-surface air temperature was passively increased by using open-top chambers (OTCs) with two different temperature increments. Soil temperature and moisture were continuously monitored at depths of 5, 20, and 40 cm at hourly intervals in a wet meadow in the Beiluhe region on the Qinghai–Tibet Plateau from October 1, 2007 to June 24, 2009. When near-surface air temperature increased by 5.29 °C and 1.84 °C in the OTC2 and OTC1 plots, respectively, relative to the control plots, soil temperatures at depths of 5, 20, and 40 cm were seen to increase by 3.84°C, 2.23°C, and 1.42 °C, respectively, in the OTC2 plots and by 0.94°C, 0.27°C, and 0.25 °C, respectively, in the OTC1 plots. Soil moisture content at depths of 5, 20, and 40 cm declined by 8.04%, 1.79%, and 1.52%, respectively, in the OTC2 plots and by 5.33%, 0.69%, and 0.09%, respectively, in the OTC1 plots. Near-surface warming was found to extend the continuous thawing time of the shallow soil, delay the occurrence of the autumnal freezing process, and shorten the duration of continuous freezing. It was also seen to increase both the temperature of the shallow soil and the accumulated temperatures at different depths. Near-surface warming could be one of the main factors leading to the degradation of vegetation, thus threatening the stability of the soil C pool and the ecological safety of the Qinghai–Tibet Plateau.     

The effect of Acetobacter sp. and a sulfate-reducing bacterial consortium from ethanol fuel environments on fatigue crack propagation in pipeline and storage tank steels

This paper evaluates the effects of microbiologically influenced corrosion (MIC) on fatigue-crack growth of candidate materials useful in expanding bio-ethanol usage, including a storage-tank steel (ASTM A36) and two pipeline steels (API 5L X52 and X70). The microbiological species sampled and cultivated from an ethanol fuel production stream are responsible for both acetic acid and hydrogen sulfide production that lead to significant increases in fatigue-crack growth rate across a wide range of stress-intensity-factor amplitudes (ΔK). The mechanism for increased fatigue damage is hydrogen uptake through adsorption into the steel, which embrittles material ahead of the growing fatigue crack.     

Simultaneous compensation of hysteresis and creep in a single piezoelectric actuator by open-loop control for quasi-static space active optics applications

Owing to their excellent properties piezoelectric actuators are studied as embedded elements for the quasi-statically active shape control of spatial optical mirrors. However, unwanted nonlinear effects in piezoelectric actuators, i.e., hysteresis and creep, severely limit their performance. This paper aims at developing a control methodology to compensate hysteresis and creep in a piezoelectric actuator simultaneously for quasi-static space active applications. In the methodology developed, hysteresis and creep behaviors are successively compensated by open-loop control. First, a derivative Preisach model is proposed to accurately portray the hysteresis while requiring relatively few measurements and describing the detachment between major and minor loops. The inverse derivative Preisach model is derived and inserted in open-loop to achieve hysteresis compensation. Then, the creep in the hysteresis compensated piezoelectric actuator is described by the use of a nonlinear viscoelastic model and a low pass filter is suggested to eliminate the effect of the inverse derivative Preisach model on the step reference input. To invert the creep model, the concept of “input relaxation” is implemented and an inverse multiplicative structure allows identifying the parameters of the inverse model while circumventing the difficulty of a mathematical computation. Finally, by cascading the low pass filter, the inverse model of creep and the inverse derivative Preisach model one after the other with the single piezoelectric actuator, the simultaneous compensation of hysteresis and creep is achieved. Experimental results show that in the case of step-like reference signals the hysteresis and the creep in a piezoelectric actuator can be significantly reduced at the same time. It implies that the developed methodology is effective and feasible in space active optics applications for which quasi-static distortions need to be compensated.     

Detection of the residues of nineteen pesticides in fresh vegetable samples using gas chromatography–mass spectrometry

In this study, we investigated the presence of 19 different agricultural pesticides in 210 samples of eight types of domestic vegetables collected from several vegetable-growing regions in Bangladesh. A multiresidue method was developed to detect the pesticide levels in the collected samples using gas chromatography with mass spectrophotometry (GC–MS). Pesticide residues were detected in 51.30% of the total samples, and among the positive samples, 38.89% contained levels above the maximum residue levels (MRLs). The most frequently detected pesticides were chlorpyrifos (34) followed by carbofuran (17), diazinon (16), carbaryl (14), malathion (11), endosulfan (8), cypermethrin (7) and dimethoate (6). Some (10.47%) of the samples contained multiple residues. It is concluded that the continuous monitoring and strict regulation of pesticide use on food crops, especially vegetables, are necessary.     

Sublattice imbalance of substitutionally doped nitrogen in graphene

Motivated by the recently observed sublattice asymmetry of substitutional nitrogen impurities in CVD grown graphene, we show, in a mathematically transparent manner, that oscillations in the local density of states driven by the presence of substitutional impurities are responsible for breaking the sublattice symmetry. While these oscillations are normally averaged out in the case of randomly dispersed impurities, in graphene they have either the same, or very nearly the same, periodicity as the lattice. As a result, the total interaction energy of randomly distributed impurities embedded in the conduction-electron-filled medium does not vanish and is lowered when their configuration is sublattice-asymmetric. We also identify the presence of a critical concentration of nitrogen above which one should expect the sublattice asymmetry to disappear. This feature is not particular to nitrogen dopants, but should be present in other impurities.     

Olfactory responses of Stegobium paniceum to different Chinese medicinal plant materials and component analysis of volatiles

Stegobium paniceum (L.) (Coleoptera: Anobiidae) is among the major pests of stored products, causing great damage to stored Chinese medicinal plant materials (CMPMs) in China. Effective control strategies are urgently needed. The aim of this study was to explore the role of volatile organic compounds in the host preference of S. paniceum. First, the olfactory behavioral responses of S. paniceum adults to volatiles from four CMPMs (Panax notoginseng, Angelica sinensis, Gastrodia elata, and Peucedanum praeruptorum) were tested in Y-tube olfactometer experiments. Then, the volatile composition of these plant materials were analyzed by gas chromatography-mass spectrometry (GC-MS). S. paniceum showed significant preferences for volatiles from the four CMPMs, compared with clean air (CA). When S. paniceum was presented with choices among different CMPMs, it showed the strongest preference for P. notoginseng, followed by A. sinensis, then G. elata, and P. praeruptorum. GC-MS analysis identified 43, 34, 28 and 60 components in the volatile profiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. Falcarinol (14.4%), 3-n-butyl phthalide (78.7%), p-cresol (40.1%), and β-pinene (29.1%) were the most abundant components of the volatiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. The olfactory responses of S. paniceum to the four CMPMs demonstrated that host-related volatiles play an important role in the host-searching process by adult beetles. This information will be useful for the development of safe and effective trapping strategies for this pest.